We offer advance butterfly valves that are available in a choice of designs like elastomer seated double eccentric design, integrally moulded liner design, metal to metal high performance triple eccentric design (fire safe design). These advance butterfly valves come in the following features:

• Longer valve life (metal to rubber bonding)
• No corrosion & abrasion ( complete Isolation of body material from fluid media)
• Liner material to suit specific fluid service
• Pressure rating up to ANSI# 600/ PN 25
• Triple seal against external leakage
• Tight shut off and precise flow control
• Smoothest opening, losing operations
• International quality product
  

We supply Zoloto butterfly valves that are especially designed to be absolutely leak proof and render maintenance free long service life. The unique feature is elastomer liner, protecting the body and shaft from corrosion while ensuring permanent leak proof tightness at all three levels of shaft passage & sandwich flanges on upstream and downstream sides. Only disc & liner remain in contact with the fluid. Optimum regulatory performance is ensured by an easy control of butterfly gate angle in the medium's flow. These valves includes:

• Cast iron butterfly valve (wafer type) lever operated
• Cast iron butterfly valve (Wafer Type) gear operated

Salient features:

• Conforms to BS 5155 & IS : 13095
• Wafer type
• Lever or Gear Operated
• Cast Iron Construction
• Cast Iron/Stainless Steel AISI-316 disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EDPM/Nitrite/Neoprene/Vitron) as per requirement which provide seating to the valve disc, as a primary seal to stem & gasket joint with matching pipe flanges.
• Two pieces stem design which is precision guided between the Teflon (PTFE) bushes.
• Compatible to sandwich between BS10-Table D, E, F, H, DIN, PN10, PN16, PN25, PN40, ASA-150, ASA-300, IS:778' flanges IS : 6392 ??? Table 17 & IS : 158 Elegant & unbreakable powder coated sheet metal lever with zinc plated Notch plate.
  

We source and supply advance balancing valves that includes:

• Flanged cast iron balancing valves
• Screwed end gun metal balancing valve with digital hand wheel

The various features of these valves includes:

• Precise double regulation (BS1873) Tamper proof setting
• With digital handle for precise flow regulation and on line flow regulation and on line flow measurement
• Positive shut of PTFE seal
• With or without drain cocks
• Corrosion and dezincification resistant gun metal body (bronze0 construction
• Conforming to BS 1873 DRV specifications Valve rating PN 1.6 (16 bat)
• Suitable for temperature range – 46° C to 200°C
• Optional self closing pressure taps on request
• BSP threaded connection 15mm (1/2”) -75mm (3”) N.B.(NTP on request)
  

We offer Zoloto balancing valves that are known for their high performance. These valves includes bronze double regulating balancing valve (screwed).

Salient features are:

• Conforms to BS 7350:1990
• Precise double regulation
• Tamperproof setting with a lock shield
• PTFE Sealing disc to ensure a proper shutoff
• Provided with Inlet/Outlet Pressure test cocks
• Facilitates System Design hence saving of energy
• Hand Wheel Operated. Easy to Install & Set
• Accentuates systematic commissioning of the plant for an optimal operation

Uses of Zoloto balancing valves:
Balancing Valve is a double regulating control & shut off valve with a built in pressure drop measuring facility. Balance valve are also used for central air conditioning plants & process heat exchangers. Each valve is provided with tow tapped pressure points for the measurement of low pressure. It can also be used for isolation & regulatory purposes and reopened to its pre-determined self position with the help of a built in locking device.

Salient features are:

• Conforms to BS 750:1990
• Precise double regulation
• Tamperproof setting
• Hand wheel operated
• Low flow noise
• Can be made available with or without drain cocks
• Superior grade cast iron flanged construction
• EPDM rubber sealing for soft shut-off

The advance dual mate check valves supplied by us are non return valves. These valves are based on advanced technology and are highly reliable. Excellent in performance and cost effective, these non return valves and have following features:

• One piece body casting for maximum corrosion resistance
• Dual plates
• Spring action closes each plate independently
• Stop pin
• Long leg spring action eliminates seat scrubbing
• Hinge pin
• Pin retainer

These check valves are sourced from the largest manufactures of check valves in Asia. The features include:

• Compact, light & rugged design
• Low pressure drop7 lower energy loss
• Flexibility in installation- Horizontal to vertical
• Valve closure at zero velocity. Hence, 'No valve- induced water hammer.'
• Silent 'non-slam' design
• No thuds
• An economic solution

These valves find their usage in various applications like: all kinds of water, chemicals, air, oil, gases ( up-to 204° C including vacuum services). The specifications available are:

• Size range – 15 -300 mm NB (1/2” - 12” NB)
• Rating – PN 16
  

The Zoloto check valve dual plates that we have are known for their superior quality. These valves includes:

• Bronze vertical check valves
• Test pressure (Hydraulic)
• 20 Kg/cm²g (300 Psig)

Specifications & features:

• Screwed female ends to BSP
• Single piece design
• Meant for vertical lines only
• Permits flow in one direction and closes automatically if flow reverses
• Spring loaded & with 'O' ring seating
• Also available in metal to metal contact
• Compelling in metal to metal contact
• Available with mark also
• Suitable for water and oil
• Size range - 15MM TO 100 MM

The Zoloto pressure reducing & sluice valve that we offer includes:

• Zoloto compact pressure reducing valve
• Test pressure (Hydraulic): 260 Psig

Specifications & features :

• Screwed female ends to BSP
• Visually very attractive and easy to install
• No diaphragm. Instead, a high quality nitrite rubber 'O' ring provided
• Provision for Installation of a pressure guage.
• Max. upstream pressure : 25 bar, adjustable downstream pressure min. 0.8 bar, max. 5.5 bar & max. working temperature 80°C
• Suitable for water and air
• Size range: 15 mm to 50 mm

The Zoloto ball valves and ball valves with strainers supplied by us are known for their assured superior quality. These valves manufactured by Zoloto Industries are known for the following superior features:

• Screwed ends to B.S. P. female inlet & 5/8” B.S. P. male outlet.
• Two piece design
• Quarter turn, lever operated for convenient manuever
• Stainless steel (AISI 304) rust proof perforated sheet screen provided in the strainer
• Stainless steel rust free and robust lever
• Amazing visual appearance
• Most suitable for refrigeration & H.V.A.C applications

The Zoloto forged brass ball valve that we offer have following features:

• Test pressure (Hydraulic): 20 Kg/cm²g (300 Psig)

Specifications & features:

• Screwed female ends to BSP
• Full bore design
• Quarter turn, lever operated
• Provided with forged brass hard chrome plated ball
• Glass filled teflon body rings & gland packing
• Amazing visual appearance
• These valves are suitable for water and oil.
• Size Range 8 MM TO 65MM

Zoloto gate valved screwed, flanged includes:

• Test Pressure (Hydraulic)
• Body : 1.5 Mpa
• Seat : 1.0 Mpa

Specifications & features :

• Controlling to IS:14846
• Bolted bonnet, inside screw & non rising spindle
• Flanged ends to IS : 1538.
• Matchless functional quality
• Suitable for water and oil
•  Size range 50 MM to 300 MM
  

We are also supplying Zoloto gate and globe valves that are manufactured by the Zoloto Industries, specialist in valve manufacturing. These valves includes:

• Zoloto gate valves- screwed and flanged
• Test pressure (Hydraulic)
• Body : 1.5 Mpa
• Seat : 1.0 Mpa

Specifications & features :

• Screwed female ends to BSPT/Flanged ends to IS : 778
• Manufactured in bonnet, Non-rising spindle, Solid Wedge
• Sheet quality Teflon (PTFE) packing
• Strictly conforming to : 778 Class-I
• Distinct edge over all other makes available in the market
• Available with open-shut indicator and locking devices also
• Suitable for water and oil
• Size range 8 MM TO 100 MM

Zoloto cast steel globe valve- flanged includes:

• Test pressure (Hydraulic): 60 Bar
• Working pressure: 40 Bar

Specifications & features:

• Flanged ends to DIN 2545 ND-40
• Straight pattern, outside screw, yoke-typing, rising spindle, bolted bonnet
• Renewable 13% Cr. stainless Steel (AISI-410) working parts, hand wheel operated
• Minimum pressure drop inside the body due to streamlined body design
• Can also be provided with special gland paking for Thermic fluid application at an extra cost
• Superb in quality & performance
• Suitable for steam and water
• Size range 15mm to 150mm
  

We offer precision engineered and durable range of pot strainers ‘Y’ and ‘T’ type. These strainers are suitable for various industrial applications. These strainers are known for various qualitative features such as adaptability and flawless performance. These are available in in various sizes ranging from 15mm to 300mm. These pot trainers are of different types including:

• Screwed
• Flanged end with brass
• Stainless steel filters

The insulation physically cross linked foam insulation that we have are sourced from thermobreak thermal insulation. Designed for value and proven to perform, these products offer outstanding thermal insulation properties and effective condensation control. These products are made from:

• Physically cross linked closed cell polyolefin foam,
• Factory fused to a reinforced 9um aluminum foil
• Backed with a specially developed acrylic tissue interlayerd adhesive system.
  

The insulation physically cross linked foam insulation that we have are sourced from thermobreak. We find their usage in various applications like:

• Duct insulation
• Raised floor insulation
• Tank insulation
• Inerslab insulation
• Wall &roof insulation
• Pipe insulation

These products are made from physically cross linked closed cell polyolefin foam, factory fused to a reinforced 9um aluminum foil and backed with a specially developed acrylic tissue interlayer adhesive system.