ABC Fittings are made of high strength Alluminium Alloy and are capable to accommodating messenger wire. The Suspension Clamps are provided with black weather resistant insulation coating to prevent the insulation of phase conductors from damage due to rubbing against the Clamps.
The Suspension Clamp assembly is sufficiently flexible to allow free movement at both straight run and angle location.
Eye Hooks are made of forged steel or mild steel. These Eye Hook are used for holding the Clamps with pole or pole clamp.
Dead End Clamps are made of high Alluminium Alloy and UV resistant glass fibre reinforced polymer. It is suitable for 25 sq.mm to 95 sq. mm bare messenger cables. All ferrous parts are made of mild steel duly hot dip galvanised. These fittings automaticallys grips the messenger wire due to tension of the wire.
The Clamps are provided with Eye Hook made of forged steel or mild steel for holding Dead End Clamps directly with the poles or through pole Clamps.
Insulation Piercing Connectors are used for 16 squre mm to 95 squre mm conductor. These fittings are made of Copper Alloy is provided for connecting both the conductor.

We manufactured the Conductor Accessories Upto 132kV line. These accessories are used to connect two parrel Connectors by accommodating one in each groove and the Conductors may be similar or dis-similer. All these Clamps are made of Alluminium Alloy castings or Forgings or extrusions and provided 1.2KN (minimum) slip strength. The electrical power rating is not less than that of the conductors. The range of Conductors are as follows: 1. Mid Span Joints for Conductor. 2. Repair Sleeves for Conductors. 3. Jointing Sleeves for Conductors. 4. Preformed Armour Rods for Conductors. 5. Vibration Dampers for Conductors.

The range of product in this head are as follows: 1. Mid Span Joints for Earthwire. 2. Repair Sleeves for Earthwire. 3. Jointing Sleeves for Earthwire. 5. Vibration Dampers for Earthwire.

We are the manufacture of universal type Parallel Groove Clamps by using high strength Aluminium Alloy which is corrosion-resistant. "H" Connectotrs (Crimped Connectors) are designed for bare conductors. These sub station clamps and Connectors are made of extruded Aluminium Alloy profiles.

Danger Notice Board / Plate in Hindi or English and in addition in the local language with the sign of skull and cross bones are required to be provided on the power line supports. The " Danger" Notice Plates are not required to be provided on supports like PCC, wood, steel rails etc. which can not be climbed easily with the aid of ladder or special appliance. We are maintaining the Indian Standard specification i.e IS : 2551-1982.

Sub-Station Clamps & Connector are used for Sub-Station. These materials are of various types like Pipe Type Earthing used 40 mm dia, Spike Type Earthing or Rod Type Earthing is made by 16 mm dia or 20 mm dia round. We also manufactured Coil Type Earthing used 8 SWJ GI Wire.

We are manufacturing high quality Universal Distribution Connector (UDC / Wedge Connector). The advantage of these Connectors are: 1. Very Low resistance. 2. Higher Conductor. 3. Easy to install. 4. Maintenance is not required. These Connectors are used for Sub-Station and distribution line and it is also functioning same as PG Clamps.

The Pole line Hardware Fittings and Accessories are manufactured by us is of high quality and the diffent types of hradware fittings are as follows: Single / Double Suspension / Tension Fittings for ACSR / AAAC Conductors. These material are confirming as per IS 2486 (Part-II), IS 2062 and forged materials are galvanised as per IS 2633 and relevant standard.

We design EHV string insulator hardware fittings as per customer requirements of the line. Few of them are as follows: 1. 132 KV Single Suspension Fittings for "Zebra" ACSR Conductor. 2. 132 KV Double Suspension Fittings for "Zebra" ACSR Conductor. 3. 132 KV Single Tension Fittings for "Zebra" ACSR with Compression Type Dead end Assembly. 4. 132 KV Double Tension Fittings for "Zebra" ACSR with Compression Type Dead end Assembly. 5. 132 KV Single Suspension Fittings for "Panther" ACSR Conductor. 6. 132 KV Double Suspension Fittings for "Panther" ACSR Conductor. 7. 132 KV Double Tension Fittings for "Panther" ACSR Conductor. 8. 132 KV Single Tension Fittings for "Panther" ACSR with Compression Type Dead end Assembly. 9. Single Tension Fittings for Earthwire 7/3.55mm or 7/3.15mm size. 10. Single Suspension Fittings for Earthwire 7/3.55mm or 7/3.15mm. 11. 132 KV Bolted Type Single Tension Fittings suitable for "Zebra" ACSR Conductor. (Number of Bolts As per the customers requirements). 12. 132 KV Bolted Type Single Tension Fittings suitable for "Panther" ACSR Conductor. (Number of Bolts As per the customers requirements).

We are manufacturing the following range of products under these head: Service Grip: dead end for use on ACSR, all aluminium and aluminium alloy conductor. line Guards for use on ACSR, all aluminium, aluminium alloy, AWAC ACAR. Double side tie for use on ACSR, all aluminium, aluminium alloy, AWAC Plastic jacked conductor. Distribution Tie for use on ACSR, all aluminium, aluminium alloy, AWAC Plastic jacked conductor. Side Tie, Armour Grip Suspension Clamp, Performed Armour Rod, Spool Tie.