Dairy Processing Machines

We also offer our clients with the steam heated tilting pan with the following specifications -
purpose :
to prepare a uniform mix for cooking vegetables at a temp of 100 „ac to 110 „ac
design parameters :
heating medium : live steam of 3. Kg/sq. Cm design pressure of the jacket : 6 kg/ sq- cm the volume of the pan measured 100 mm below the brim shall be of 500 ltrs. The pan shall be double walled and jacketed construction
required services :
steam : live steam of 3. 0 kg/sq. Cm electric power :3 phase, 415 v, 50 hz, a/c supply
tilting arrangement of the pan :
two heavy duty hollow shaft shall be welded to the jacket and this shafts shall be supported on the stand through bush bearing. The stand shall have four legs and these legs will have footings for grouting in the foundation. The material of the stand shall be of s. S 304.
heating of pan :
heating shall be provided to the pan by feeding live steam at 2 to 2. 5 kg/ sq-cm to the jacket and the condensate shall be discharged out from the bottom most part of the jacket and it shall be complete with steam trap and by-pass valve.

SKYLARK’ Bottle Sterilisers are heavy duty  process machines primarily used to process milk filled glass bottles.

 

‘SKYLARK’ manufactures full range of bottle sterilizers (steam retort ) from 150 bottles to 2880 bottles per batch.

All  retorts can be ordered in lengths from 1 basket to 8 baskets capacity.

 

Customer options

includes automatic or manually-opened door designs. We offer orbit type door opening & closing. The customer may also specify m.s. or s.s. construction.

 

Model
480 bottles	30 bottles in a basket  4 basket in a row top 2 rows, bottom 2 rows (120 X4 Rows)
720 bottles	36 bottles in a basket 5 basket in a row top 2 rows, bottom 2 rows (180 X 4 Rows)
1080 bottles / batch	36 bottles in a basket 5 basket in a row top 2 rows, middle 2 rows bottom 2 rows (180 X 6 Rows)
1512 bottles	36 bottles in a basket 6 basket in a row ( 216 X 7 Rows

 

USES:

In dairy industries for sterilization of flavoured milk  bottles.

We manufactures plate heat exchangers of reliable quality and performance, for use in Dairy, Food and Chemical Process industries.

Application :

• The Plate Heat Exchangers are used for general cooling / heating of liquid in dairy , water and ice-cream mix.
• The plate heat exchanger consists of a pack of corrugated plates with port holes for the passage of two fluids between which heat transfer takes place.
• The plate pack is clamped between a fixed plate and pressure plate. The plates are fitted with gasket. The number of plates are determined by the flow rate, properties of the fluid, pressure drop and temperature programme.

Salient Features :

• Attractive cost effective design.
• High regeneration above 90%
• Plates are of imported design type with high heat transfer coefficient.
• Available in 300Lph to 5000 Lph.

These compact designed icecream tanks are used for mixing and aging of mixture at required temperature. Manufactured from superior quality raw material like SS (304), these can be customized according to clients need. Its specifications are:\

• Capacity - 200lts-1000lts.
• Convienent usage.
• Low maintenance cost.

Functional requirement
The roller conveyor shall be of   3.0   mtrs  long and will be used for transferring filled milk cans of 40 L capacity from dock to tipping bar near weighing  scale. The width of the conveyor shall be 450 mm.
 
Supporting frame
It shall be supplied with necessary supporting structrue duly painted by zinc chromate primer and enamel paint
 
Rollers
All rollers shall be of 60.5  mm  O.D. with bush bearing arrangement at either end and to take load of milk cans. The rollers shall be placed at a distance of 100 mm.
 
 
Legs
Conveyor assembly shall have sufficient no. of pipe legs with ball feet capable of 50 mm adjustment.

Functional requirement.-The machine is required to mechanically scrub the inside , outside surface of standard 40 lit milk
 
Design parameter-
Immersion type bath with nylon brushes
Manual loading & unloading of can
Holding capacity of the trough -425 lit  
         
Construction:
 
 Trough          -The trough  shall be fabricated from 2.0 mm thick s.s. conforming to AISI 304.
 
Legs ---- four legs with s.s. ball feet
 
Nylon brushes – shall be of good quality and capable of cleaning all inner & outer surface within a few rotations
Fittings--- overflow & drain
 
Drive ---The  drive  shall be complete with 1.0 hp  electric motor, gear box, chain , sprocket, bearing, coupling etc.
Covers- Removable type cover for the drive assy.
 

we manufacture sanitory designed milk  kettles with electrically heating with strirrer , capacity 50 / 75 ltrs
used in paneer making industry, basundi making etc.