|
 |
 |
Paints |
|
We manufacture a range of highly effective paints which are highly durable and have superior finish. Made from the best raw materials, our paints are not hazardous to the users. Our product range includes:
 |
Premium Acrylic Emulsion | Description : | Combines exceptional elegance with durability to keep exteriors looking ever new. As a water-based high-build 100% acrylic emulsion, it has unmatched anti-fungal, anti-flaking and anti-fading properties. Hair-line cracks are easily bridged because of its superior adhesion and plasticity. Growth of fungi and algae is curbed, and the blackening they cause in other exterior finishes prevented, by its broad spectrum biocides and fungicides. Besides, its unique one-way barrier - a special osmotic quality of the paint film - allows it to breathe out moisture without absorbing any - thus protecting the brickwork and concrete. | | Thinning : | Water. | | Uses : | Cement, sand surfaces, brickwork, rough cast concrete blocks, fibre boards and cement paint coated surfaces. | | Finish : | Smooth and Matt. | | Application : | Brush or roller., | | Covering Capacity : | 12 to 13 sq. metres per litre per coat depending on the surface and shade. | | Drying Time : | Dry for a minimum of 4 hours between coats. | | Color Range : | As per shade card. | | Packing : | 1, 4, 10 & 20 litres. | | Highlights : | Avoid painting during rains | | Shelf Life : | 12 Months | | Flash Point : | N.A | | Undercoats : | Normally no primer is required. On highly absorbent or chalky surfaces, apply a coat of Weather coat Smooth thinned with water (1:1 by volume) as a self priming coat to reduce surface porosity. | | Directions of Use : | Mix one litre of weatherite to 400 ml of water approximately before application | | Application Areas: | Cementous, asbestos & brickwork etc. |
| |
|
 |
 |
|
|
|
 |
|
Premium Synthetic Enamels Super synthetic is a high gloss, fast drying, multi purpose enamel based on synthetic resin. It is designed to give good coverage and gives a beautiful long lasting finish to all wood, metal and other surfaces. It can be used for exteriors as well as interiors and a wide variety of surfaces.
Salient features of our Super Synthetic Enamel are:- High performance
- Excellent flow and leveling
- Available in a balanced and attractive range of colors
Super synthetic enamel is supplied ready to brush but may be thinned with MTO to the desired quantity. For finishing apply two coats of super synthetic enamel over the primer surface.
Technical Data:
| Areas of Application | Metal, wood, plaster and a variety of other surfaces | | Viscosity @ 300 Celsius | For white 130-140 sec, For shades 110-120 sec (ford cup no B-4) | | Method of Application | Brush, spray or Roller | | Drying time @ 300 celsius | Re-coating time Max:-For white 8 hrs | | Shades Finish | Smooth & Glossy | | Coverage | 15-22 mt/lt/coat (at 20-25 micron dry film)10-12 mt/lt/coat (at 35-40 micron dry film) | | Thinner | M.T.O | | Packs available | 20 lt, 4 lt, 1 lt, 500 ml. | | Shades available | As per shade card | | Recommended | Brushing 55-60 sec. | | Application viscosity | Spraying 25-30 sec ( by ford cup no B-4 at 30°C) | | Recommended primers | For metals:- Red Oxide Primer For woods: White Primer or Pink Primer |
| |
|
|
|
|
|
|
|
|
Synthetic Clear Varnish It is a high synthetic resin-based varnish, recommended for wood for interior application. It can also be used for mixing in synthetic enamels for enhancing the gloss.
Salient features of our Clear Varnish are:
• Good durability
• Superb gloss and retention
• Excellent hardness
• Good drying properties
It is formulated with mild solvents that makes it suitable for already painted
surfaces.
| Areas of Application | Wooden surfaces | | Viscosity of Supply | 900 10 sec by Ford Cup B-4 at 300°C Thinner Thinner 101 | | Method of Application | Brushing or spraying Spreading Capacity (by brushing on smooth mild-steel surface) 10-13 sq. mtr./ltr/coat (depending on the film thickness) | | Drying time @28-300°C & 30+5% R.H. | Surface dry -not more than 2 hours Hard dry -not more than 18 hours | | Finish | Smooth and glossy Flash Point Above 3000°C (8600LF) | | Packs available | 200ml., 500ml., 1 ltr., 4 ltrs., 20 ltrs. | | Recommended primers | Red Oxide Primer For woods:- White Primer or Pink Primer |
| |
|
|
|
|
|
|
|
|
Sanding Sealer & Table Top Clear Sanding Sealer
| Description : | An undercoat for light coloured wood having good build and easy sanding quality. It gives natural colour of the wood. | | Thinning : | With Auto king Thinner 4005 | | Uses : | As sealer for light coloured wood and veneer like white lacquer | | Application : | By Brush/Spray/Soaked Cloth. | | Covering Capacity : | 8-10 sq. meters litre. | | Drying Time : | 10 minutes. Sanding Time: 30 mins. | | Color Range : | Slight hazy whitish | | Packing : | 500 ml, 1 & 4 ltr. | | Shelf Life : | 12 Months | | Flash Point : | Below 25°C | | Undercoats : | Self | | Application Areas : | On wooden Furniture |
Table Top:
| Description : | A hard tough clear lacquer having resistance to water, alcohol, heat and cold. | | Thinning : | Auto king Thinner 4005 | | Uses : | On all wood works & steelworks. For high class finish for table tops, furniture, bank counters, radio, cabinets, bookshelves etc. | | Finish : | Glossy Finish or Matt | | Application : | By spray with Autoking Thinner 4005, 1-1.5 parts by volume. | | Covering Capacity : | 10 sq. meters per litre. | | Drying Time : | Surface Dry : 10 min. Hard Dry : 6 hrs. | | Color Range : | Colorless, Slightly Pale | | Packing : | 500 ml, 1 & 4 ltr. | | Shelf Life : | 12 Months | | Flash Point : | Above 20°C | | Undercoats : | Sanding Sealer |
| |
|
|
|
|
|
|
|
|
Automotive Paint | Description : | Glossy's Autoking automotive paint is a high quality finish paint Ideal for refinishing all types of cars, scooters, commercial vehicles and other items like refrigerators, fans. It is a fast drying finish, protects your car from rust on its metal body. Autoking offers attractive colours, along with glossy and durable finish. Autoking is specially formulated for Indian weather conditions and has been tested rigorously under extreme conditions all over the country. Autoking contains special non-fading pigments and ultraviolet absorbers that protect your car from blistering Indian sun. Rust inhibiting agents check corrosion in the monsoon making your car look good year after year. | | Thinning : | Thinner 25% by volume | | Uses : | For all vehicles, painting cars, scooters, commercial vehicles, sports goods, refrigerators, steel furniture, hospital furniture, fans and toys, light alloys metal and non metal surface. | | Application : | By Spray Only | | Covering Capacity : | 15 sq meters per litre | | Drying Time : | Surface: 10 minutes Hard dry: 6 Hours | | Color Range : | As per autoking shade card or any shade on request | | Packing : | 20 Ltr, 4 ltr, 1 ltr, 500 ml. | | Shelf Life : | 12 Months | | Flash Point : | Above 25°C | | Undercoats : | Special G.D. Primer/ surfaces grey |
| |
|
|
|
|
|
|
|
|
Synthetic Iron Oxide Powder Red Oxide:
| Description : | Synthetic inorganic pigments with mineral silicates. | | Uses : | For making tiles, stains & stainers. | | Covering Capacity : | 20-25 sq. mtr. Per Kg | | Color Range : | Red | | Packing : | 400gm, 10Kg, 25Kg, 50Kg | | Shelf Life : | 12 Months | | Application Areas : | Cementous & alkaline asbestos surface | | Shelf Life : | 12 Months | | Flash Point : | Above 25°C | | Undercoats : | Special G.D. Primer/ surfacer grey |
Yellow Oxide:
| Description : | Synthetic inorganic pigments with mineral silicates. | | Uses : | For making tiles, stains & stainers. | | Covering Capacity : | 10-15 sq. mtr. Per Kg | | Color Range : | Golden Yellow | | Packing : | 400gm, 10Kg, 25Kg, 50Kg | | Shelf Life : | 12 Months | | Directions of Use : | By blending with the base | | Application Areas : | Cementous & alkaline asbestos surface | | Shelf Life : | 12 Months | | Flash Point : | Above 25°C | | Undercoats : | Special G.D. Primer/ surfacer grey |
Green/ Blue Oxide:
| Description : | Synthetic inorganic pigments with mineral silicates. | | Uses : | For making tiles, stains & stainers. | | Covering Capacity : | 10-15 sq. mtr. Per Kg | | Color Range : | Blue | | Packing : | 400gm, 10Kg, 25Kg, 50Kg | | Shelf Life : | 12 Months | | Directions of Use : | By blending with the base |
| |
|
|
|
|
|
|
|
|
Copyright © S. M. Paints Industries, All Rights Reserved (Terms of Use)