We manufacture S M – 108 stand base mounting chlorinator which operates under vacuum. The vacuum created in the injector by pressure of water passing through PVC piping/tubing to the vacuum regulator chamber via control valve. Gas from cylinder/tonner passes through PVC coated copper tubing & enters a gas filter assembly where moisture and foreign particles are removed and send to differential vacuum regulator. Here, the diaphragm assembly dislocates inlet valve with the help of vacuum on one side, atmosphere pressure on the other and allows the gas to flow through flow meter via control valve where the flow rate of gas can be adjusted manually.

The gas passes to the injector where it is mixed with water in the mixing chamber and the solution is discharged to the point of applications. If the water supply to the injector fails or any block in vacuum the inlet valve inside vacuum regulator assembly immediately isolates the gas under pressure and stops the flow of gas even though the cylinder valve is open and the gas inside the system is exhausted through the vent via relief valve.

Our SM 108 model SBM chlorinator is designed for continuous & constant flow of chlorine/sulphur dioxide or ammonia gas in full vacuum mode with vacuum controller chamber, flow meter, gas flow control valve, chlorine/water pressure gauges, a gas filter, a injector to connect motive water and point of application.

Areas of Application

* Water filtration plants
* Sewage treatment plants
* Cooling water systems
* Industrial effluent treatment

Installation Offerings

* Equipment Erection
* Testing & commissioning
* On-site PVC / carbon steel pipe & fitting modifications to on site requirement
* Auto shutoff of gas flow when break in vacuum flow
* Booster pump for high vacuum requirements
* Flow meter calibration for high chlorine requirements
* Safety equipment - gas masks, chlorine leak arresting kits
* FRP Scrubbers

We offer best quality cylinder mounted vacuum type gas chlorinator SM-117, which is designed for assuring safety & space saving chlorinator. Our chlorinators consist of vacuum regulator, rotameter, flow control valve, yoke clamp to connect directly on cylinder, a gas filter, a injector assembly vent and vacuum tubing of 5 meters.

Principle of Operation

Water under pressure passes through injector causes vacuum, which open spring loaded diaphragm check valve. Vacuum passes through vacuum tubing to the chlorinator. When cylinder/tonner valve opens, chlorine passes through self aligned yoke gas filter where foreign particles are removed if present, chlorine gas passes to regulator where the cylinder pressure is controlled by the inlet valve assembly.

When vacuum is adjusted by control valve, vacuum is opened in the inlet valve with the help of diaphragm assembly and allows chlorine gas to pass through flow meter where flow can be adjusted in to injector & point of application. If there is any break in the vacuum line, the system automatically shuts off the chlorine gas supply.

Material of Manufacturing

We utilize totally non corrosive materials in manufacturing our chlorinators such as UHMWHDPE, PTFE (Teflon), monal, PVC, borosilicate glass, hastelloy "C", PVDF, VITON, etc.

Areas of Applications
Our Cylinder mounting chlorinator is applicable in :

* Water Filtration Plants
* Cooling Water Systems
* Sewage Treatment Plants
* Industrial Effluent Treatment

Installation Offerings
We also offer installation services which encompasses following services :

* PVC / polythene pipe / tubing for vacuum supply
* Liquid / moisture trap for chlorine gas
* C. S. piping / copper tubing
* Booster pump, chlorine test kit
* Erection and commissioning
* Annual maintenance contract of any make
* Non return valve, strainer, etc.

We present SM 207 Model SMPM chlorinator which is designed to offer continuous & constant flow of chlorine/sulphur dioxide or ammonia gas in full vacuum mode. It also has differential vacuum controller chamber, flow meter, gas flow control valve, chlorine /water pressure gauges, vacuum gauges and gas filter and an injector to connect motive water and point of application.

Principle of Operation

Our SM-207 Model SMPM Chlorinator is operated under vacuum created in the injector by water pressure is passing through PVC piping /tubing to the differential vacuum regulator chamber via control valve. Gas from cylinder/tonner passes through PVC coated copper tubing & enters a gas filter assembly where moisture and foreign particles are removed and send to differential vacuum regulator. Here, the diaphragm assembly dislocates inlet valve with the help of vacuum on one side, atmosphere pressure on the other and allows the gas to flow through flow meter via control valve where the flow rate of gas can be adjusted manually.

The gas passes to the injector where it is mixed with water in the mixing chamber and the solution is discharged to the point of applications. If the water supply to the injector fails or there is any block in vacuum inlet valve, inside the vacuum regulator assembly, it immediately isolates the gas under pressure and stops the flow of gas even though the cylinder valve is open and the gas inside the system is exhausted through the vent via relief valve.


Installation Offerings

We also offer installation services which encompasses following services :

* Equipment erection, testing & commissioning on-site
* PVC / carbon steel pipe & fitting modifications to on site requirement.
* Booster pump for high vacuum requirements
* Flow meter calibration for high chlorine requirements
* Safety equipment-gas masks, chlorine leak arresting kits
* FRP scrubbers

We also manufacture cylinders for chlorine storage. These cylinders are been manufactured with steel and are rugged and damage proof. They are also lightweight and have comfortable holds for easy carrying. They also has solid foot rings for stability and durability. We coat them with zinc for better rust protection. We offer a wide range of cylinders to choose from. We offer them clean and dry from inside which making them scale resistant.

We do a safe and convenient packaging for protection against damages during shipping. We do a full leak test before and after mechanical valve installation and dispatch.

We also offer the chlorine cylinders in the weight range of 100 Kgs.

For working in smoke / gaseous contamination of any degree or oxygen deficient areas. A must for fire fighting , rescue operation and industrial safety.

* Widely used all over the country by various private and public sector undertakings.

* Available in 30 minutes and 45 minutes duration cylinders.

Special Features

* Pressure reduction system of set is as per the latest international standards

* No assistance required for donning the set

* The cylinder can be changed for recharging without any difficulty

* The brass parts are chromium plated for corrosion resistance

* Gives audible alarm before the expiry of the time.

* The equipment is supplied is an easy to carry case.

* Equipment manufactured as per IS : 10245 Part II.

We also undertake the small projects for installation of floor mountings for the machines and cylinder holders for any industry. We can also manufacture these floor mountings as per client's specific floor design or conditions. These floor mountings are been manufactured with high quality mild steel and then zinc coated for better rust prevention.