Hydraulic Pumps

We are dealing with LINDE Hydraulics axial piston
pumps and motors.

Model codes  - HPV,BPV,HPR,BPR- HYDRAULIC PUMPS  HMF, HMV, HMA, HMR - HYDRAULIC MOTORS

  For L&T - CK-90-3 machine - HPR 130 pump (In Stock)

                        

L&T - CK-72 machine - HPR 100 pump

Please feel free to contact us for inquiry,we can offer you with best price.

we are stockists of pumps & cartridge kits for serivicng tokimec sqp series pumps.

we offer imported tokimec equivalent  cartridge kits  cartridges kits for mobile & industrial applications. . The vane design with self compensation for wear and clearances make volumetric efficiency of pump nearly constant over service life. The intravane design of the vane pump keeps the vanes in constant contact with the cam ring. Even at higher speeds & pressures this self compensating vane tip wear feature provides high performance over life of the pump. Cartridge kits are the primary way to service the pumps to restore the pump performance,lower the replacement cost and reduce downtime.

We supply original linde pumps & motors.

we also provide replacement/equivalent parts for the linde series pumps & motors:

we provide replacement parts for the following linde series pumps:
hpr75/100/130/140/160
b2pv50/75/105/140,bpv35/50/70
bpr140/186/260
bpv35/50/70 linde series
hpv55t

We are stockists of Cartridge kits for serivicng VICKERS/DENISON Pumps.

We offer imported Vickers equivalent  Cartridge Kits & Original Denison Cartridges kits for Mobile & Industrial applications. .The vane design with self compensation for wear and clearances make volumetric efficiency of pump nearly constant over service life.The intravane design of the vane pump keeps the vanes in constant contact with the cam ring.Even at higher speeds & pressures this self compensating vane tip wear feature provides high performance over life of the pump.Cartridge kits are the primary way to service the pumps to restore the pump performance,lower the replacement cost and reduce downtime.Cartridge Kits of Vickers 20V/VQ(5,8,11,12,14 GPM),25V/VQ (12,14,17,21 GPM),35V/VQ (25,30,35,38 GPM) & 45V/VQ(42,50,60 GPM)  series are  used to service single & double Vickers vane pumps of series 2520V,3525V,4525V,3520V,4520V etc.The cartridge kit is independent of the shaft allowing for easy change of flow capacity and field servicing without removing the pumps from its mounting.

We are stockists of original Denison pumps & all spares; DENISON Hydraulics Vane pumps & Cartridge kits; Single,Double & Triple Vane pumps.

MODEL: T6C, T6D, T6E, T6CC, T6DC, T6EC, T6ED, T7 SERIES, T6DCC Cartridge kits, Shafts, Seal kits, complete pumps available ex stock.

We are importers/stockists of Hydraulic Vickers Replacement Pumps which have the same mountings & specificatiosn as that of VICKERS. We offer all these pumps with ex stock delivery and reasonable prices.

MODEL:

COMPLETE PUMP UNITS(V/VQ):
25V, 35V, 45V, 2520V, 3525V, 4525V, 4535V, 3520V, 4520V ONE TO ONE REPLACEMENT OF V/VQ VICKERS SERIES FOR INDUSTRIAL/MOBILE APPLICATIONS.

FEATURES:

• 12 VANES DESIGN FOR INDUSTRIAL APPLICATIONS
• 10 VANES DESIGN FOR MOBILE APPLICATIONS
• Low noise level & input power
• Long service life

S.M.Shah & Co offer Hydraulic Gear Pumps with displacements of 0.8cm3/rev. to 153 cm3/rev made in Aluminium & conforming to SAE-BIS and DIN Standards.Theese pumps are available in wide variety of mounting flanges with two & four bolt mountings for easy installation.Direct drive is advisable between the gear pump & the prime mover using a coupling which will allow self alignment of shaft. The pump suction line should be large & free from sharp bends to prevent excessive suction head. A relief valve should be provided to pump outlet so that working pressure of pump is controlled. The reservoir capacity for industrial applications should be three to five times the open loop flow per minute being drawn from the reservoir. For mobile applications, the reservoir should be sized for not less than 0.75 time the open loop flow .

The volume for rams and actuators must be allowed for by providing adequate air space and breathing. Mineral oil based hydraulic fluids are selected as per the requirements of temperature during operation. High tensile aluminum alloy bodies are used throughout the range to ensure uniformity in material properties and maximum fatigue strength. The applications of these pumps include agriculture tractors, construction equipments, material handling equipment, earth moving equipment, mining, drilling equipment & road paving.

We are suppliers and srockists of VELJAN Hydraulic Products mainly Vane Pumps & Cartridge kits:

Single Vane Pump :T6C,T6D,T6E

Double Vane Pump: T6CC,T6DC,T6EC,T6ED

Triple Single Vane Pump:T6DCC

Vane motors: M3B,M4C SERIES.