X
View Mobile Number86% Response Rate

Our Products

+View All

Industrial Lifts

We introduce ourselves as an eminent manufacturer and supplier of Industrial Lifts. Keeping an eye on current market trends, our diligent workers put their hard core efforts to manufacture these industrial lifts. These are manufactured in compliance with international quality standards, using optimum quality raw material and latest technology. Further, our valuable clients can avail these industrial lifts in diverse specifications, in compliance with details specified by clients.

  • Hofmann EELR-703 The Two post lift
  • Hofmann EELR-703 The Two post lift
  • Hofmann EELR-703 The Two post lift
Interested in this product?
Get Best Quote

Hofmann EELR-703 The Two post lift

Get Latest Price

Minimum Order Quantity: 1 Unit

Usage/ApplicationServicing
Maximum Load2-4 tons
BrandHofmann
Warranty12 months
I Deal InNew Only

Key Feautrres:

  1. Symmetrical arm design.
  2. Dual diret-drive hydraulic cylinders.
  3. Dual function overhead shut-off
  4. Arm restraint.
  5. Single point manual lock.
  6. Emergency stop switch

Model No.   EELRIN703
  Type of Lift   Symmertrical
   Capacity   3500 Kgs
   Overall width   3402 mm
   Width between columns   2790 mm
   Drive-thru width   2541 mm
   Overall height   3596 mm
   Under bar clearance   3384 mm
   Pad height from floor   99 mm and 149 mm
   Arm retracted length   781 mm
   Arm extended length   1142 mm
   Maximum lifting height   1814 mm
   Lift time / Lower time   59 / 48 sec
   Power supply   380 VAC, 3 Ph, 50 Hz: 220 VAC,1Ph, 50 Hz

 Application & Features - 

  • Dual direct-drive hydraulic cylinders:   Ensures smooth operations with maximum lifting force.
  • Dual function overhead shut-off:  This protects taller vehicles from being damaged and also protects the lift from over-pressure damaged.
  • Symmetrical arm design(2-stage):  Allows bi-direction drive in operation.
  • Emergency stop watch:  Emergency stop key lock to limit use of lift for safe operations.
  • Power packs configurations to suit your requirements
  • Arm restraint: Designed to be safe and long lasting.

View Complete Details

Yes, I am interested!

Interested in this product?
Get Best Quote

Backed by a team of adroit professionals, we are manufacturing and supplying an extensive array of John Bean Two Post Lift. Used in mining, engineering, and other related industries, these are manufactured from quality proved raw material that ensures their strength and resistivity to an adverse condition.

 

Product Description:


Electro-hydraulic free floor Asymmetric Type. Capacity 3.5tons.
Adjustable lifting pad to reach low pick up point.

Safety features:

  • Mechanical lock at both column,
  • Dual function overhead shut off switch.
  • Arm lock 25mm teeth design

Key Features:

  • Electro Hydraulic with free floor Asymmetrical type. with the cap. 3.5 tons.
  • Two separate lifting piston synchronized by steel cable
  • Twin stage adjustable lifting pad suitable for low pick up points
  • Two stage telescopic arms suitable to reach lifting points.
  • safety mechanisms - Mechanical lock with the slotted bar at a various height
  • Dual function auto shut off overhead limit switch
  • Arm lock with gear teeth design

 

Specifications:


4 Ton Clear Floor
EELR560
4 Ton Floor Plate
EELR516
4 Ton Clear Floor
EELR517
Capacity4 Ton4 Ton4 Ton
Overall Width3402mm3402mm3397/3647mm
Width Between Columns2752mm2752mm2747/2997mm
Drive-Thru2437mm2437mm2415/2665mm
Overall Height3705mm2831mm3515/3815mm
Under Bar Clearance3593mmNA3403.5/3703.5mm
Lifting Pad100-147mm100-147mm106-153mm
Front Arm2-Stage(802-1202 mm)3-Stage(720-1320mm)
Rear Arm2-Stage(802-1202 mm)3-Stage(720-1320mm)
DesignSymmetrical
Secondary LockDual Point Mechanical




Additional Information:

  • Item Code: SOL3500

View Complete Details

Yes, I am interested!

Interested in this product?
Get Best Quote

To serve the requisite demands of our clients, we are engaged in manufacturing and supplying a qualitative range of Hoffman Two Post Automotive Lift. Used for conveying the heavy product or material from one end to other by means of motor driven, these industrial lifts are designed by an experienced team of professionals, with in-depth knowledge about the latest trends prevailing in the industry. In addition to this, clients can avail these lifts from us in diverse specifications.

 

Features:-

 

  • Anti-corrosive

  • Withstand harsh conditions

  • High efficiency

 

Key Features:


  • Electro Hydraulic with free floor Asymmetrical type. with cap. 3.5 tons.

  • Two separate lifting piston synchronized by steel cable

  • Twin stage adjustable lifting pad suitable for low pick up points

  • Two stage telescopic arms suitable to reach lifting points.

  • safety mechanisms - Mechanical lock with slotted bar at various height

  • Dual function auto shut off overhead limit switch

  • Arm lock with gear teeth designing

 

Specifications:-

Type of lift

Asymmetrical

Type of Equalization

Cable

Capacity

3500kgs

Capacity per Arm

875kgs

Overall width

3628mm

Width between columns

2790mm

Drive through width

2080mm

Overall Height

3631mm

Under Bar clearance

3419mm

Height to lowered lift pad

110mm

Height to Raised low lift pad

215mm

Front arm Retracted length

717mm

Front arm Extended length

1048mm

Rear arm Retracted length

791mm

Rear arm extended length

1141mm

Maximum Lifting height

1920mm

Lift time / Lower time

49 / 45 secs

Primary Safety

Mechanical Loct at every 76mm starting at 610mm

Auxiliary Safety

Load holding valve on power pack

Hydraulic safety

2 cylinders direct, flow restrictors



Additional Information:

  • Item Code: BTE3500

View Complete Details

Yes, I am interested!

Interested in this product?
Get Best Quote

We are engaged in offering a wide range of Hoffman Wheel Alignment Scissors Automotive Lift to our valuable clients. We use optimum grade material and progressive technology in the manufacturing process. Our offered range is examined against various parameters under the vigilance of our quality controllers to deliver a flawless range at the client's end. Apart from this, these are made available in standard as well as customized specifications as per requirement of our clients.

 

Features:

 

  • Reliability

  • Enhanced service life

  • Resistance against corrosion

 

Key Features:

 

  • Heavy duty 4 tons (9000 lbs) lifting capacity

  • Smooth upward and downward movements

  • Starts lower: 222mm (8.75") drive-on height for low profile vehicles

  • Lifts higher: 1830mm (72") full height for stand-up comfort during alignment adjustment

  • Wide 610mm (24") runways and long 1650mm (65") rear slip plates for maximum capability on vehicles

  • Open center front and rear for optimum under-car servicing accessibility

  • No chains or cables to wear out - hydraulic synchronization

  • Power unit is free standing

  • Long approach ramps allow gentle drive-on for low profile vehicles

  • Two different safety mechanisms for operator protection

  • Hydraulic velocity fuses on both cylinders to prevent accidental lift drop

  • Visual/audible mechanical safety locks engage automatically as lift goes up

     

 

Specifications:

  • Lifting Capacity : 4 Tons (9,000 IBS)
  • 4 Wheel Alignment service wheelbase: 3657mm(144")
  • Overall Length: 5943 mm(234")
  • Overall Lenght : 5343mm(234")
  • Overall Width: 2133 mm(84")
  • Runway Width: 610 mm(24")
  • Maximum Raised Height: 1830 mm(72")
  • Maximum Lowered Height:222 mm(8.75")
  • Alignment Height Position: 7
  • Lift Time: 60Sec
  • Power Requirements: 380-415V,3PH,50/60 HZ


Other Power option Available

Additional Information:

  • Item Code: BLA9144

View Complete Details

Yes, I am interested!

Interested in this product?
Get Best Quote
Usage/ApplicationServicing
BrandJohn bean

Electro hydraulic free floor symmetric Type.

Capacity 3.5tons.
- Adjustable lifting pad to reach low pick up point.
- Safety features:
Mechanical lock at both column,
dual function overhead shut off switch. Arm lock 25mm teeth design

Lifting Capacity (Ton)3.5 tonsLifting Height (mm)1814Inside Column width (mm) 2790Lifting Time (Secs)59Decent Time (Secs)48Front Arm Reach (mm)781 - 1142Rear Arm Reach (mm)781 - 1142SafetyTop shut down limit switch, arm locking, slotted mechanical lock and emergency stop switchDrive Through Clearance (mm)2541Ceiling Height  (mm)3596Motor Power (kW)2.2Power Supply Requirement380VAC, 3 Ph, 50 Hz.Any Other special FeatureSpecially engineered sliding blocks are extremely strong and resistant to wear - reducing maintenance cost


Application & features  - 

  • Dual direct-drive hydraulic cylinders:   Ensures smooth operations with maximum lifting force.
  • Dual function overhead shut-off:  This protects taller vehicles from being damaged and also protects the lift from over-pressure damaged.
  • Symmetrical arm design(2-stage):  Allows bi-direction drive in operation.
  • Emergency stop watch:  Emergency stop key lock to limit use of lift for safe operations.
  • Power packs configurations to suit your requirements
  • Arm restraint: Designed to be safe and long lasting.

View Complete Details

Yes, I am interested!

Interested in this product?
Get Best Quote
Running ModeMoving
Starts lower222mm (8.75")
FeaturesCorrosion resistance
BrandSnap-on Tools

Being a client-centric organization, we are engaged in offering a wide array of John Bean Wheel Alignment Scissors Lift. Our skilled professionals manufacture these lifts, from high quality raw material, using the latest technologies. In ahead of their final dispatch, our offered lifts are thoroughly checked by our quality inspectors against varied quality parameters. Available with us, in customized options, these are highly demanded in the market.

 

Features:

 

  • Corrosion resistance

  • Low maintenance

  • High performance

 

Key Features:

 

  • Heavy duty 4 tons (9000 lbs) lifting capacity

  • Smooth upward and downward movements

  • Starts lower: 222mm (8.75") drive-on height for low profile vehicles

  • Lifts higher: 1830mm (72") full height for stand-up comfort during alignment adjustment

  • Wide 610mm (24") runways and long 1650mm (65") rear slip plates for maximum capability on vehicles

  • Open center front and rear for optimum under-car servicing accessibility

  • No chains or cables to wear out - hydraulic synchronization

  • Power unit is free standing

  • Long approach ramps allow gentle drive-on for low profile vehicles

 

Specifications:

 

  • Max.wheel base 144” (3657mm)

  • Overall width 84”(2133mm)

  • Overall length 234" (5943mm)

  • Raised Height 72" (1830mm) and Lower height 8.5" (222mm)

  • Compressed Air Supply 10-15 bar

  • Power Supply 380 ~ 415 V,3ph, 50 hz

  • Lifting time: 60 secs.

 



Additional Information:

  • Item Code: 48109b

View Complete Details

Yes, I am interested!

Interested in this product?
Get Best Quote
Model Name/NumberEELRIN534AC3 Scissors on Scissors Lift

Key Features : 

  1. Capacity of 3.5 Ton for primary and secondary platform.
  2. Primary Platform Lifting height 1862 mm & Secondary platform lifting height 456 mm.
  3. Secondary platform design eliminates the requirement for additional roller jack and also has a clear unobstructed working area between the platform.
  4. Compact and space saving design without columns.
  5. Dual Engagement twin interlocking mechanical safety lock with pneumatic release (from 430 mm)

 Technical Specification :

Capacity  3.5 Ton
Installation Recommendation Flush Mount
Minimum Height (Primary) 330 mm
Maximum Height (Primary) 1860 mm
Runway Length 4000 mm
Platform Width 620 mm
Overall Width 2160 mm
Rear Slip Plate Length 1517 mm
Maximum Wheel Base 3280 mm
Maximum Length (Surface Mount with ramp) NIL
Maximum Length (Flush mount) 4300 mm
Maximum Front turn table length 476 mm
Plate Length 1400 mm
Plate width/Lifting Width 550 mm
Lifting Height 0-456 mm

 

 


Tyre Shop benefits : 

  • No Jack Requires which makes your shop more Managed and spacious.
  • No Additional Roller Jack require which saves additional cost.
  •  Stand UP Comfort during alignment adjustment.
  •  All Wheel Off adjustments can be done.
  •  Secure all safety Measures.
  •  Fast Wheel Rotation and wheel Balancing which gives you more time to attain more customer.
  • All work can be done at a single Bay.
  •  reduce fatigue in operators, increasing levels of production





View Complete Details

Yes, I am interested!

Get in touch with us

Reach Us

Snap-on Tools Private LimitedPlot No. 6/2, Begumpur, NH-8, Delhi-Jaipur Highway, Behind Toyota Showroom, Sector 35, Gurgaon, Gurugram-122004, Haryana, India

Rakesh Kumar (Sr. IT & Development Manager)

View Mobile Number86% Call Response Rate

Send SMS
Send Email
Leave a Message, we will call you back!
Send your enquiry to this supplier
terms privacy policy
All Rights Reserved (Terms of Use)