PCD-CBN Standard and Non Standard Tool

PCD- CBN blanks as per your requirement  triangle, round, rectangular, square any form of as per your  drawing. You can make your tool by  your own way.

· Shape

· Length

· Width

. Thickness

· Angle

· Drawing

 

PCD - CBN Turning, Boring, Grooving, parting standard tools as per customers required shank, size, length, Nose  Radius you can use these type of turning tool in allgeared lathe also.

• Shank Size
• Shank Length
• Side  ( left or right )
• Size of tip

You can get center cutting Endmill Cutters Or side cutting Endmill cutters, Corner Radius type Endmill Cutters, Corner Chamfer Type Endmill Cutters,Ball Nose Cutters as per your requirement.

• Diameter of cutters
• Flute length
• Centre cutting Or side Cutting
• Over all length
• Flat portion required on shank ( length )

Special tool with super abrasive cutting edges involve significant initial investment. The current trend is to develop multi-edge bars that make it possible to perform several operation Simultaneously, Shoring cycle times and drastically reducing the number of tool holders needed .

• Shank dia & length.
• Steps dia
• flutes
• cutting lenth.
• Tip size.
  

Standard & non standard PCD-CBN Brazed tips in any shape with required nose radius. Small types of Boring, Parting tools, Milling tips.

•  Tool Size
•  Tip size
•  Nose Radius
•  Cutting length
•  Shank size
  

PCD CBN Brazed Standard Endmill, BallNose, Long Series Endmill, Ballnose.

• Drills
• Reamers
• Slitting Cutters
• Side & Face Cutters
• T-Slot Cutter
• Centre Drill
• Engraving Cutters
• Taper Cutters
  

Parting and Grooving tools up to 0.8 mm. Specially for graphite, Glass Filled rubber, Teflon.

·          Tool Size

·          Tip Size

·          Cutting length

 

As per Your design we can make engraving tools. Specially for aiiluminium, Brass, Graphite, Wood, Stone, Plastic.

·          Shank Size

·          Tool Size

·          Point Flat Size

·          Cutting length

·          Total Length

·          Degree

As per specific demands of our clients, We provide resharpning and relaping services for a wide range of products ( Resharpning- Relaping & Regrinding Of PCD-CBN-Solid Carbide Cutters & Form Tools ). We have modern tools and advance facilities for offering qualitative service for our range. We execute the required service on timely basis at a nominal rate and make sure that our client are totally satisfied with our service.

• Solid Carbide Endmill, Ballnose Cutters & Roughing (Chip breaker) Endmill Cutters
• Solid Carbide Drills & Reamers
• Solid Carbide Slitting Saw-Side & Face Cutters
• Solid Carbide Form Cutters,Punches,T-Slot Cutters, Do-tail Cutters
• Solid Carbide Engraving Tools & Taper Cutters
• Non Standard Tools & Cutters as per Your Requirments
• PCD-CBN BLANKS
• PCD-CBN Brazed Turning Tools
• PCD-CNB Brazed End Mills & Ball Nose
• PCD-CBN Brazed Customized Cutters
• PCD-CBN Brazed Tips & Cutting Tools
• PCD-CBN Standered Cutting Tools
• PCD-CBN PartingTools
• PCD-CBN Engraving Tools
• Resharpning, relaping & regrinding of Pcd, Cbn, solid carbide cutters & form tools.