We bring you 2 AXES CNC Control that is a compact, low cost, computerized numerical control for metal cutting machine tools and other equipment requiring positioning and contouring axes. Menu driven, this CNC offers an easy-to-use, cost effective motion control for a wide variety of manufacturers.

Model	1	2	3	4	5
M2 T (Turning)	CNC upto 2 axes+spindle	+ Built in PLC / MOP	+ machine status displays and function blocks	+ Built in DNC, 1 to 4 Mb expansion memory and USB	+ Built in SPC functions

Features

• Control of up to two axes plus spindle. Feedback Inputs: 4 (2 axes+Spindle+MPG)
• 8" green CRT display(optional 9"). Analog Outputs: 3(2 axes+Spindle). 2D linear and circular interpolation
• CMOS RAM memory for storing MSD, Tool Data, "M" functions and part programs (32K)
• High resolution for high accuracy. Control resolution is 0.001 mm/0.0001 inch.
• Self-charging battery for memory retention up to one month
• MSD parameters may be entered using keyboard or from a PC using serial port.
• MSD parameters are displayed in an easy-to-read menu for simple selection and entry.
• Standard and Parametric Subroutines, user defined Canned Cycles. BCD Output for M2 functions and T2 functions.
• Spindle Creep command for gear and tool changes. Program entry in ISO code & Assisted program entry.
• Math functions, conditional jumps. RS232 (V24) port for PC communication and DNC.
• 32 tool offset files (length and wear compensation, Programmable Feed Rate and Spindle Speed.
• Location code and tool radius. Number of Main Programs:250
• Internal feedback multipliers facilitate various Feedback resolutions of: 0.001 mm, 0.002 mm, 0.0025 mm, 0.005 mm 0.01 mm per pulse or 0.00005 in, 0.0001 in, 0.0002 in, 0.00025 in, 0.0005in, 0.001 in per pulse.

Our 3 AXES CNC Control is a compact, low cost, computerized numerical control for metal cutting machine tools and other equipment requiring positioning and contouring axes. Menu driven, this CNC offers an easy-to-use, cost effective motion control for a wide variety of manufacturers.

Model	1	2	3	4	5
M2 M (Milling)	CNC upto 4 axes + spindle	+ Built in PLC / OIP	+ machine status displays and function blocks	+ Built in DNC, 1 to 4 Mb expansion memory and USB	+ Built in SPC functions

Features

• Control of up to four axes plus spindle.
• Feedback Inputs: 5 (4 axes+MPG).
• 8" green CRT display (optional 9").
• Analog Outputs: 5(4 axes+Spindle).
• 3D linear, 2D circular interpolation, Helical Interpolation.
• CMOS RAM memory for storing MSD, Tool Data, "M" functions and part programs (32K).
• High resolution for high accuracy.
• Control resolution is 0.001 mm/0.0001 inch.
• Self-charging battery for memory retention up to one month.
• MSD parameters may be entered using keyboard or from a PC using serial port.
• MSD parameters are displayed in an easy-to-read menu for simple selection and entry.
• Standard and Parametric Subroutines.
• Standard and user defined Canned Cycles.
• BCD Output for M2 functions and T2 functions.
• BCD Output for S2 or S4.
• Geometric aids simplify programming..
• Optical Encoder or Scale feedback's On, Jog Mode, Thread cutting On, Axes Enable.
• Graphic programming assistance Emergency and Reset Outputs.
• DNC/Simultaneous programming.
• Optical Encoder or Scale feedback Operation.
• Metric or inch feedback is selectable by MSD.
• Manual data entry via keyboard.
• Internal feedback multipliers facilitate various Feedback resolutions.

We bring you sophisticated Programmable Logic Controller that is:

• Compact, modular type, cost effective PLC.
• Designed to withstand harsh industrial environments in Indian Industries.
• Brings the power of computer technology to shop floor.

Special Features

• Processor based PLC.
• Enhanced Boolean instruction for Ladder.
• Comprehensive self diagnostics for CPU & I/O's.
• Serial communication for intelligent interfaces.
• User configurable I/O bus.
• Wide choice of rugged I/O's.
• Modular concept.
• Front end termination for easy installation.
• Intelligent user friendly programmer-ARI ONE.

Strong Hardware Features

• Detection of CPU Error, low battery indication, program mode, RUN mode indication.
• Watch dog timer.
• Easy to read I/O status.

PROGRAMMING FEATURES

• Inexpensive, compact, user friendly compact programmer-ARI ONE.
• LogicSoft ladder development package used for editing/modifying ladder and monitoring of i/o status.
• Ladder software is driven by interactive menu through dynamic soft function keys.
• Configuration of I/O modules done through software.

Summary of the Product

• (I) SOFTLOG PLC-MODEL ODYSSEY 2.
• CPU Module.
• Base Unit-32I, 16O.
• Expansion I/O-32I, 16O or 24I, 24O.
• Single axis controller card.
• Communication-RS232/RS485.
• Operator Panel-Useful for programming external timers/counters, error messages etc.

We bring you a compact bi-directional port PLC, first of its kind. The most attractive feature of this PLC is every port can be programmed as digital input or digital output. The Basic PLC unit has in all twenty-four such programmable ports. The number of ports can be increased maximum up to 64 with the help of additional expansion modules. The latest Micro controller Technology offers reliability to the performance of the PLC. Due to this bi-directional feature one can really get real flexibility at lower cost.

MICROPOD PLUS can be easily programmed with a hand held programmer. The 49 keys feather-touch keyboard and back lit LCD display make the PLC, a user-friendly tool. "LogicSoft" a PC based ladder diagram development and monitoring software package is also available. In addition to digital inputs-outputs, this PLC also has 8 analog inputs and 2 analog outputs. This makes sensing, indication and control of various process variables such as temperature, pressure … etc, an easy possibility. The in-built Real Time Clock makes all these controls possible on real time scale. There is one High Speed Input available in this PLC, which can be used for some critical control for which minimum sensing time is required.

We offer a world-class range of PWM DC Servo Drives having capacity up to 250 V DC and 100 A. The PWM close loop control technology offers higher reliability and accuracy in positioning applications. These drives are sturdy, simple and very easy to use. The over current protection, under-over voltage protection, drive Inhibit function and a potential free Monitor Voltage Relay ( MVR) available with this drive, really assures hazard free smooth operation.

The state-of-art MOSFET based power amplifier cards of this drive improves the performance of the drive and the plug in type pre-driver section on the power card make the power cards easily serviceable.

We bring you international standard Softlog Brush Less DC Servo Drives.

Features

• Closed-loop integrated system with Speed and Torque control mode.
• Scale factor that can be set by the user on both analog and frequency inputs and on the repetition of the encoder signal.
• PNP/NPN/Differential frequency interface, with digital filter that can be configured by the user for noise immunity.
• Integrated management of over travel signals.
• Built-in fully automatic notch filter to remove the system’s resonance frequency.
• Control: with analog signal (proportional to Speed or Torque).Optically coupled digital control I/O.3 inputs and 2 outputs with user-defined functions.
• External regenerative resistor provided with sensing for maximum temperature alarm (optional) 200VAC to 230VAC Power Supply [+10%; –15%], single-phase or three-phase (can be set by operator).
• Power sections kept separated for logic/signal and power electronics
• Built-in protection circuits against any overload, input over voltage and any motor connection error (wrong encoder wiring, phase-phase and phase-ground short-circuit).
• Dynamic braking circuit activated when the power section is not powered or in case of alarm.

Our twin compactor is a twin channel electronic compactor with an rs232c output. Its sturdy, splash – proof and ergonomic design make it the ideal compactor for the harsh shop floor environment.

Salient Features

• Two independent measuring channels a & b with selection of combinations +a, -a, +b, -b, +a+b, +a-b, -a+b & -a-b.
• 2 metric and 2 inch measuring ranges; metric ranges: +/- 200 & +/-2000um.
• Resolution: 0.1 & 1um inch.
• Ranges: +/- 0.020 & +/- 0.200 inch.
• Resolution: 0.00001 & 0.0001 inch.
• 3 ½ digit large bright red led display.
• Red, green & yellow tolerance lamps for undersize–ok–oversize indication.
• RS 232c data output.
• Externally accessible zero and calibration controls.
• Suitable for half–bridge type inductive probes.
• Sturdy, ergonomic, metallic body.
• Splash proof and sealed against dust.
• In–built 110v/220vac mains selection.

The MGS-01 is a modular inspection system. The System consists of a Main CPU unit, and Operator Interface Panel. It's modular construction allowsfor system up-gradation and easy maintenance. If all the options areselected total system will look like:

Main CPU unit Part No.: MCU1

• Contains Processing Software · Accepts inputs from up to 32 probes
• Compares the results with the hi an low limits and indicates alarms
• Serial Communication Port for PC interface (RS232 interface)
• Parallel Printer Port · Data Storage
• Real Time Clock

Probe Interface Module (PIM) Model: MGS-01

• Has the necessary electronics to condition the output of a LVDT analog probe
• Has a local keypad for probe offset adjustments
• PIM conditions and coverts the probe output for use by Main CPU and indicates the actual reading of an individual probe
• Has three LED indicators Red – Reject, Green – OK, Yellow – Rework
• Has Buzzer for failure / reject condition

Operator Interface Panel (OIP) Part No.: OIP

• This module has a keypad and LCD display (text display).The required readings (e.g. pre-programmed algebraic relations between PIM1, PIM2 and PIM4) are indicated by this display.
• Algebraic relations among different inputs (from probes) are programmed, Processed and indicated on the digital display
• This module has a LCD graphic display.
• Apart fro algebraic functions of an OIP, it has graphic screens for pie charts, Cpk, standard deviation, high, low alarms etc.

Digital Input / Output Module (DIO) Part No.: DIOM

• This Digital Input Output Module enables the MultiGuage Inspection System (MGS-01) to interface with the outside world. It provides 8 general purpose bidirectional input/ output lines.