Sohal Engineering Works

Make Vulcanizers are horizontal, circular vessels for curing of rubber articles. These are made in diameters ranging from 800mm to 2400mm and the length 1 meter to 12 meters depending upon the requirement of the users.
PRESSURE RATING : Uttam Vulcanisers are normally designed and built for a working steam pressure of 5 Kg/cm² and are tested hydraulically before despatch for a pressure of 7.5 Kg/cm²
DIRECT/INDIRECT HEATING : For direct steam curing single wall vulcanisers are standard supply, however for indirect curing coil-in-chamber type Vulcanisers can be supplied with cyclonic-fan motor for even temp. in vessel
TYPES OF DOOR : Either swing-bolt type doors with mono-rail type retracting mechanism, sealed against leakage by asbestos ropes or quick-lock type design as shown in picture
TEMPERATURE INDICATION : Temperature indicator shall be provided. FORCED AIR CIRCULATION : For hot air curing, forced air circulation fans can be attached on rear side of the vessel to ensure even temperature at all points in the Vulcaniser. These fans are with special water cooled seals.
STANDARD ACCESSORIES : Standard Vulcanisers are supplied with blank flanges for steam, inside batch trolly, bridge-stand, safety valves, Guages etc.

Cost effective calendering lines available with us are used for known for manufacturing the quality goods, which are known for their consistency. They can withstand harsh industrial conditions.

The rubber crackers manufactured by us have warm reduction gear box are known for their durability and strength. They are packed and supplied in conducive packing.

Hot Feed Rubber Extruder Machines is most suitable to produce various rubber sections or shapes, out of warm Rubber or Rubber Compounds, the machine is used in manufacturing of Rubber Tubes, Strip Sheets, Tyre Tread, Rubber Hoses, Angles, Channels, etc. Range of Heads Tread Head : For Tyre Treads Strainer Head : FOR filtering the compounds Straight Head : FOR Rubber Tubes, Strip Sheets, Rods , Angles, etc. Cross Head : FOR second coating of pre-extruded section like Hoses, Profile, etc.

Hydraulic Presses for Thermosetting components are used in manufacturing of (Brake Linings, Clutch facings, trimming of die casting products and for other purposes. These hydraulic presses are known for their high efficiency.

The rubber manufacturing mills are used for pigment chips, rubber compounding and electronic grade rubbers. They are available with safety devices and other features keeping in mind the needs and requirements of different industry.

The rubber gears manufactured by us are available with reduction gearbox for Greaves & Elecon having anti friction roller bearings.

We were the first one to develop rubber calendars in India. These reasonably priced calendars are widely for tyre and non-tyre industries. They can be supplied in bulk quantities at any place in India and abroad. Rubber calendar machines are used to skim coat, friction and sheet rubber products. These machines can vary in size according to the product being manufactured and the output. Rubber calendar machines ensure uniform coating of rubber products and also uniform thickness of rubber sheets, they also help to ensure higher productivity and better processing of rubber.

Benefits of Rubber Calendar Machine:

• Higher productivity
• Better processing of rubber
• Minimal manual interference
• Higher quality products
• Uniformity of products

The time saving and easy to use rubber kneaders available with us are widely used in rubber industry for superior quality results that help clients in improving their product performance. These kneading machines are reasonably priced and can be supplied at any destination.