Sohal Engineering Works

Make Vulcanizers are horizontal, circular vessels for curing of rubber articles. These are made in diameters ranging from 800mm to 2400mm and the length 1 meter to 12 meters depending upon the requirement of the users.

PRESSURE RATING :

Uttam Vulcanisers are normally designed and built for a working steam pressure of 5 Kg/cm² and are tested hydraulically before despatch for a pressure of 7.5 Kg/cm²

DIRECT/INDIRECT HEATING :

For direct steam curing single wall vulcanisers are standard supply, however for indirect curing coil-in-chamber type Vulcanisers can be supplied with cyclonic-fan motor for even temp. in vessel

TYPES OF DOOR :

 Either swing-bolt type doors with mono-rail type retracting mechanism, sealed against leakage by asbestos ropes or quick-lock type design as shown in picture

TEMPERATURE INDICATION :

Temperature indicator shall be provided. FORCED AIR

CIRCULATION :

For hot air curing, forced air circulation fans can be attached on rear side of the vessel to ensure even temperature at all points in the Vulcaniser. These fans are with special water cooled seals.

STANDARD ACCESSORIES :

Standard Vulcanisers are supplied with blank flanges for steam, inside batch trolly, bridge-stand, safety valves, Guages etc.

Hot Feed Rubber Extruder Machines is most suitable to produce various rubber sections or shapes, out of warm Rubber or Rubber Compounds, the machine is used in manufacturing of Rubber Tubes, Strip Sheets, Tyre Tread, Rubber Hoses, Angles, Channels, etc.

Range of Heads Tread Head :

• For Tyre Treads Strainer Head
• FOR filtering the compounds Straight Head
• FOR Rubber Tubes, Strip Sheets, Rods , Angles, etc.
• Cross Head
• FOR second coating of pre-extruded section like Hoses, Profile, etc

Hydraulic Presses for Thermosetting components are used in manufacturing of (Brake Linings, Clutch facings, trimming of die casting products and for other purposes. These hydraulic presses are known for their high efficiency.

The rubber gears and rubber refiners manufactured by us are available with reduction gearbox for Greaves & Elecon having anti friction roller bearings.