Evaluation Systems Used in Occupational Therapy

Linear motion steadiness test apparatus (electrical):  linear motion steadiness test unit is designed to progressively measure one's aspect of psychomotor control. Patient moves a ring stylus through a progressively increasing stainless steel rod to measure subject's performance of   hand movement. A beep gives the feed-back while stylus touches the rod. Distance of movement can be measured and recorded.

• Pay Mode Terms: L/C (Letter of Credit), Other

Pencil maze test board: this durable pencil maze can be used to assess coordination or learning problems. The bottom has a hard surface to prevent grooving, and it uses a paper to produce a permanent record of subject's performance. Can be used with blind-fold goggles.

• Pay Mode Terms: L/C (Letter of Credit), Other

Hand tapper test board (electric) :the task on this apparatus is simply to tap, with a stylus, as rapidly as possible, on the two stain-less steel pads, located at each end of an 18" long teakwootapper test bod board with storing space. Unit fitted with event counter & timer to record the progress.

Hand dynamometer (portable): specifically designed spring scale to measure grip force from 2kg to 25kg is attached to a gripping unit that permits maximal isometric contraction. A knob on the metal frame permits instant adjustment to any hand size proportion. Scale provides immediate readout. All steel construction with bright chrome finish.

• Pay Mode Terms: L/C (Letter of Credit), Other
• Minimum Order Quantity: 1 Piece/Pieces

Hand-grip dynamometer (digital): hand-grip digital dynamometer with  electronic strain-gauge is engineered for routine screening work & for evaluating maximum strength of subjects grip. Unit can be fixed on wall or on stand. The sealed system with peak hold facility, register force in 1kg graduation from 0 to 99kg, ensuring a high degree of accuracy. Sports complex needs the unit for sports persons and medical colleges and hospitals need it for evaluating trauma or diseased hand

• Pay Mode Terms: L/C (Letter of Credit), Other

Finger goniometer (stainless steel): a simple & accurate device for measuring range of motion of small finger joints (i. P and m. P joints) constructed of stainless steel. Comes in a pouch for storage. Unit measures about 14cm. In length.

• Pay Mode Terms: L/C (Letter of Credit), Other

Goniometer, 180° (stainless steel): a simple and accurate device to measure joint's range of motion. Stainless steel construction. Two 180°scale in opposite direction for convenient reading of all angles. Comes in a pouch for storage unit measures about 50mm x 200mm. In length.

• Pay Mode Terms: L/C (Letter of Credit), Other

Goniometer, 360° (aluminium): four,0 to 90°, two,0 to 180° & one,0 to 360 degree scales in 5 degree increments to read range of motion. Aluminium sheet construction with a locking arm. Knurled knob adjusts arm tension or fully locks the arm. Overall length 30cm. Comes in a beautiful pouch for storage.

Gravity inclinometer (360ø):this goniometer can accurately measure the movement of most of the body's joints. This easy to use device is placed on the appropriate body part, closet to the axis of movement, with hook and loop strap. Ideal for measuring typical difficult areas such as the cervical spine (rotation, flexion, extension & lateral flexion) and lumber spine.

Hand tool test frame: this hand tool test measures proficiency in using ordinary mechanics tools. The test consists of tools & two uprights with bolts. The object is for the subject to disassemble all the bolts from one one upright & reassemble them on the corresponding rows of the other upright with the heads of the bolts inside. This type of skill is important in many different factory jobs.

Finger dexterity test (100 holes & tweezer):tests manipulative dexterity of right & left hand, individually & simultaneously. Measures dexterity in activities involving gross movements of fingers hand & arm; also measures efficiency in activities involving primarily "tip of the finger" dexterity. Specialized test requires using tweezers to place pins in holes requires precision, steadiness, and a high degree of eye-hand coordination.  
set consists of :laminated board has 100 holes to place in pegs & covered recess to store parts,tweezer s. S,plain pins s. S,screws, washers and nuts.

• Pay Mode Terms: L/C (Letter of Credit), Other

Key hole test board: hinged box board with randomly positioned key-hole shaped 25 slots. Patient must insert metal pegs in to the hole and line up slot to insure proper fit. This test requires more complex visual-motor coordination and is helpful in evaluating lateralized brain-damage.

• Pay Mode Terms: L/C (Letter of Credit), Other
• Minimum Order Quantity: 1 Piece/Pieces

Counting and colour sorting beads set: manipulative for counting, colour recognition & eye-hand co-ordination. The box contains ten s. S. Wire rods & 100 plastic beads in five different colours wire rods fit in the lid of the box. Patient put differently coloured beads in different wires.

• Pay Mode Terms: L/C (Letter of Credit), Other
• Minimum Order Quantity: 1 Piece/Pieces

Sorting - matching - posting box set : colour sorting, matching and posting box with 25 well polished plastics plates in 5 different colours. Measures an individuals basic level of function in the area of colour identification and eye-hand co-ordination

• Pay Mode Terms: L/C (Letter of Credit), Other

Body-parts puzzle kit : an excellent manipulative aid for teaching body image awareness. Wooden body puzzle has 6 large parts, as children fit the body together, they begin to see & understand the relationship between body parts and parts to whole. Body puzzle is 45cm. Long with two facial expressions, comes in a hinged box.

• Pay Mode Terms: L/C (Letter of Credit), Other
• Minimum Order Quantity: 1 Piece/Pieces

Finger prehension device: heal, evaluate and develop finger dexterity with this 40x15 cm finger pretension device. Four stainless threaded rods from 1/4" to 3/4" offer a span of steel test possibilities. Patient threads a large coupler from one end of a rod to the other & then progress to a smaller diameter.

• Pay Mode Terms: L/C (Letter of Credit), Other
• Minimum Order Quantity: 1 Piece/Pieces
• Port of Dispatch: From our Factory

Sound discrimation set:  consists of 2 boxes, each containing six cylinders. Cylinders contain various materials in pairs, and when shaken produce different sounds. The child may pair cylinders with identical sounds or arrange a set of cylinders in order of loudness.

• Pay Mode Terms: L/C (Letter of Credit), Other

Mathematical Board-Combines the manipulative experiences of a Pegboard with practice in Hand-Eye coordination, improves shoulder ROM and assists the development of grasp strength & tolerance. The mathematical puzzle creates interest and provide learning opportunity. 50mm thick and 107cm long, 10 Round and 10 Square pegs are easy to hold and place. Each peg is numbered & the client places the pegs in holes to solve the math puzzle. The peg board can be hanged on wall or placed on a table.

• Pay Mode Terms: L/C (Letter of Credit), Other