Security & Surveillance Equipment

A photo luminescent material which emits a clear and visible glow when there is power failure .This material did not require battery – power or any other source for emission of the glow. In view of this, it is one hundred percent safe and does not involve any heat, flame, electric shocks or pollution. Upon exposure to light, natural or artificial, this photo luminescent material absorbs and store light energy and then absence of light, this captivated light is released to give off a luminous glow by non – toxic chemical. They have long life and no maintenance is required. It requires no external or internal wiring.  When the lights go out, Safety Signs start glowing immediately, and it becomes the best way to lead people out to safer places. It works without any power sources, and its extended afterglow period is long enough to lead people out safely.

Global standards reveal that the most dangerous hazards (risk of occurrence of an event) are associated with people working at heights. These hazards vary according to the critical location and nature of work being carried out. 

A safety harness works by spreading the force applied by a fall arrest system over as much of a worker's body as possible. The harness is connected to an anchorage point via a decelerator such as a shock-absorbing lanyard or a retractable lifeline. The harness specifically helps minimize internal injuries. It also allows workers to attempt self-rescue in the event of a fall, since it provides freedom of movement.

Inspection and Care:

Safety harnesses must be visually inspected before each use. The use of damaged, defective or excessively worn components. Check for frayed or pulled fibers on the webbing and stitching. Also watch for discoloration; this may indicate chemical damage. Look for cracks, rough edges and distortion of any metal components. Clean the harness with a damp sponge and a mild soap and water solution. Wipe it down with a clean towel to remove excess moisture. Allow the harness to air dry away from sunlight and high temperatures. Store this equipment where it will not come into contact with corrosive or contaminating substances.

Warning :

It is not safe for a worker to remain suspended in a safety harness after a fall. Rescue by trained personnel should begin immediately to avoid suspension trauma.Harnesses provides the highest performance, is critically proven across diverse industry applications.

Relevant industries:

• Construction
• Steel
• Mining
• Transmission
• Defense
• Public works
• Telecommunication

We also offer customers CCTV cameras that can be placed where there is maximum chance of theft or in corners of important places for meeting the demands of effective surveillance. These can be offered in ceiling or wall mounted dome camera option and are made available in black & white as well as any other colour options. Moving in 360 rotations with variable speeds of 0-250 per second, these cameras allow seamless tracking of moving subjects.

Features:

LENSES: (FIXED /MANUAL & AUTO IRIS/ZOOM MOTORISED)

• Lenses are specifically designed to meet vigorous continuous duty specifications like even in low light vision lenses & lenses for medical applications (e.g., endoscopies, heart surgery etc.)

Monitors:

• Extremely affordable & very easy to work with
• These monitors are available in black & white and any other color to suit everyone's needs
• We can offer from small rack-mountable monitors that are designed to deliver great picture in tight spaces to large-format monitors that knows how to deal with today's demanding multiplexes & quad display

Automatic Sequential Switches

• These switchers are handy when there are many cameras & only one monitor
• These are programmed in a manner that they automatically switch over from one camera to other in 5 seconds (or as desired)
• These save not only cost of monitors but also space

Quads:

• For standard surveillance CCTV system, four cameras can be connected to single quad unit
• The advantage of having squad is that it helps in viewing and recording (4-8) cameras simultaneously on single monitor
• These are highly cost effective in this respect

Multiplexers:

• These are functionally same as quad but with advantage that in quad only 4-8 cameras can be viewed & recorded simultaneously whereas in this 16 cameras can be handled

Time Laps VCRS:

• These videocassette recorders are unique in sense that these can record happenings speed over 24 hrs (To up to 40 days) on single normal 180 minute cassette

Digital Video Recorder :

• From 4 cameras, 8 & 16 cameras, with dynamic IP Address that can be viewed at remote locations

Other Advantages:

• 24 hrs Surveillance
• Low power consumption
• Based on advanced electronic technology
• Cost effective
• Very easy to operate as well as maintain
• Eliminates pilferage
• Enhances production

Metal Detector ( Hand Held Metal Detectors & Door Frame Metal Detectors)

We offer customers a wide range of optimum functionality based metal detectors to choose from. These include door frame metal detectors and hand held metal detectors. Designed using advanced sensor technology, these help in achieving maximum target discrimination.

Door Frame Metal Detector –

• Maximum target discrimination
• Lower power consumption
• Instant recovery on detection
• Easy to operate as it does not require specially skilled personnel to operate
• High reliability and long life performance
• High sensitivity & accuracy
• Detects all metals including magnetic stainless steel
• Totally indigenous, spare parts & maintenance readily available
• Robust & user friendly controls as well as features
• Audio/Visual alarm on detection

How It Operates:

• Door Frame Metal Detector create high frequency electromagnetic field that acts as a passage through which all persons should pass
• Presence of any metallic particles cause reaction in this field that is sensed by detector and signal is amplified & processed as required
• Security is absolute with this metal detector as these door frame metal detectors are designed to detect both Ferrous as well as Non Ferrous Metals that are passed through aperture vicinity in any conceivable manner
• Being highly sensitive, these are used in jewellery manufacturing units as well as other manufacturing units to protect various unavoidable pilfering activities
• This Metal Detector is also ideal for customs, factories as well as all high security sires
• This Metal Detector has Phase sensitive detection circuits that allow users to enhance sensitivity for certain group of metals as well as reduces it for others to large extent

Hand Held Metal Detector –

These high performance Hand Held Metal Detectors offered by us are designed to meet exact requirements of security industry. Typical uses will include conducting body search for offensive weapons in crowd control, airport & border security, checking parcels & letters for metal objects and for the detection of hidden metal that need to be detected.

We offer customers good quality helmets that come with fitted spot light (6 volt) with charger and battery setup. The safety torch used in these helmets is fire proof with 3 cell as well as 2 cell option made in USA.