Indiamart
logo
Sonana Plastic 5
YR
5th Year of Membership
Ahmedabad, Gujarat

Plastic Granules

Our leading industry is one of the reputed organization holds in offering a superior quality Plastic Granules. These granules are good demand in the market due to high quality and durability. These products are available in market at competitive rates.

HD Granules

HD Granules

We are trader and supplier of HD Granules as per the customer requirements.

Polyphenylene Sulfide Granules

Polyphenylene Sulfide Granules

Owing to our vast experience, we have been successful in catering to the requirements of our esteemed clients by offering high quality Polyphenylene Sulfide Graules. The offered assortment is processed at a temperature of 300-350OC. These products are sourced from most trusted and reliable vendors of market with the aid of our procuring agents.

Technical Specifications:

Injection Molding:

Because of its low viscosity, mold tightness has to be checked. A mold temperature of 140OC is recommended to obtain good crystallization and minimize warping but in order to have higher productivity, a mold temperature of 50OC followed by a post crystallization at 200OC is possible. It is not recommended for applications requiring high dimensional stability

Applications:

  • Heating and air-conditioning components, coffee warmer rings, curling iron insulators, fry pan handles, hair dryer grills, steam iron valves, toaster & dryer switches and microwave oven turntables
  • Automotive: fuel flow sensor, fuel pump components, throttle deactivator, fuel rails, heater core tanks, water pump impellers, thermostat holder, coatings, abs motor components, booster pistons, electric brakes, valve bodies, engine gasket carriers, seal housings, servo covers and pistons, stators, alternator components, connectors, ignition components, sensors, switches, bulb housings, reflectors, sockets
  • Electrical Markets: connectors, sockets, bobbins, switches relays

Technical Specifications:

Density

1.35 g/cm3

Glass Transition Temperature

88-93 oC

Gamma Radiation Resistance

Good

UV Light Resistance

Good

Max Continuous Service Temperature

200-220 oC

Sterilization Resistance

Good

Thermal Insulation (Thermal Conductivity)

0.29-0.32 W/m.K

Strengths & Limitations:

Strengths

Limitations

Outstanding chemical resistance even at high temperature

Medium to poor impact resistance.

Continuous service temperature > 200 oC

Limited colorability

Intrinsically FR (VO)

Low melt viscosity

Excellent Dimensional Stability

High Cost

Tight Tolerances

 

Good electrical insulating properties

 


Product Code: PPS

Polyurethane Granules

Polyurethane Granules

Our wide range of Polyurethane Granules (PU) is a cost-effective choice for manufacturing seals that are used against water, dirt and air infiltrations. These polyurethane granules are formulated using quality raw material that helps in protecting sensitive and delicate equipment from noise, vibration and impact. We offer these in vergine & reprocess to suit the varied requirements of our clients.

Product Code: PU

Polycarbonates Granules

Polycarbonates Granules

Backed by rich industry experience, we are trading and supplying a vast variety of Polycarbonate Granules. Manufactured using excellent quality material, our range has inexhaustible potential for innovation. The range offered by us is used for transparency, toughness and heat resistance. Also, these products are used for replacing glass or metal in demanding applications when the temperature does not exceeds 125OC.

Features:

  • Appearance- Optical clarity
  • Impact strength- Thermal resistance (up to 125 degrees)
  • Flame retardancy
  • Weather-ability
  • Biocompatibility
  • Good electrical properties


Applications:

  • Packaging
  • Sports and leisure
  • Safety equipment
  • Consumer goods
  • Electrical and electronics
  • Toys
  • Construction glazings
  • Optics
  • Medicals
  • Automotive lightning
  • Glazing
  • PC - Milky, gray, black, red, green, blue, pink and opec colour.
  • PC - Transparent (red, orange, green, yellow, blue, smick & colors)
  • PC - F.R glass filled 10%, 20%, 30% color
  • Vergine and next to vergine


We are dealing with the following companies:

  • Samsung
  • Laxson
  • Bayer

 

Product Code: PC

PBT Granules

PBT Granules

We are engaged in offering our clients a wide range of PBT Granules (Arnite) that is widely used for various industrial applications. These are highly appreciated for high mechanical strength and thermal stability attributes by our clients. Available in natural, glass filled colors & F.R., these polymers exhibit improved toughness properties and are highly flame resistant.

Product Code: ARNITE

Acrylonitrile Butadiene Styrenes Granules

Acrylonitrile Butadiene Styrenes Granules

With firm commitment to quality, we are trading and supplying a comprehensive range of Acrylonitrile Butadiene Styrene Granules. Our range is processed using latest machines and advanced technology following standards & norms of the industry. While processing the offered range, pre-drying is not always needed for injection molding with a vented cylinder.

Specifications:

Extrusion:

  • L/D ration of 25-30 is recommended
  • Melt Temperature: 210-240OC


Injection Molding:

  • Melt Temperature: 210-270OC
  • Mold temperature should lie between 40 - 70OC


Applications:

  • Automotive/Transportation: Instrument panels, pillar trim, dashboard components, door liners and handles, seat backs
  • Health Care/Medical: Nebulizers, compressors, medicine boxes
  • Appliances: Appliance control panels, housings, seat belt components, spoilers, wheel trims


Strengths & Limitations:

Strengths

Limitations

High Rigidity

Poor weathering resistance

Good Impact Resistance, even at low temperatures

Ordinary grades burn easily and continue to burn once the flame is removed

Easily Processed

Poor solvent resistance

Good weldability

Can suffer from stress cracking in the presence of some greases

Good abrasion and stain resistance

 

High Dimensional Stability

 

Good paintability and good palatability

 

Specifications:

Density

1.02-1.21 g/cm3

Glass Transition Temperature

90-102 oC

Gamma Radiation Resistance

Good

UV Light Resistance

Poor

Max Continuous Service Temperature

86-89 oC

Min Continuous Service Temperature

60-80 oC

Sterilization Resistance

Poor

Thermal Insulation (Thermal Conductivity)

0.11-0.14 W/m.K

Product Code: ABS

Low Density Polyethylene Granules

Low Density Polyethylene Granules

The most common process used for LDPE Granules is extrusion (tubes, blow and cast films, cables etc.). LDPE can also be processed by injection molding or rotomolding.

Extrusion:

  • Melt Temperature:  180-240 oC
  • Higher melt temperatures are needed for extrusion-coating (280-310 oC)
  • A three zone screw with a L/D ratio of around 25 is recommended

Injection Molding:

  • Melt Temperature:  160-260 oC
  • Post mold shrinkage lies between 1.5 and 3.5%


Applications:

 

  • Packaging: Pharmaceutical and squeeze bottles, Caps and Closures, Tamper Evident Liners, Trash Bags, Films for Food Packaging, Laminations.
  • Consumer Goods: Housewares, Flexible Toys
  • Agriculture:  Agricultural Films
  • Pipes & Fittings: Water Pipes and Hoses
  • Wiring & Cables: Sub-conductor insulators, Cable Jacketing

Technical Specifications:

Density

0.917-0.94 g/cm3

Glass Transition Temperature

-110 oC

UV Light Resistance

Fair

Max Continuous Service Temperature

80-100 oC

Min Continuous Service Temperature

-70 oC

Thermal  Insulation (Thermal Conductivity)

0.32-0.35W/m.K

Strengths & Limitations:

Strengths

Limitations

Very Low Cost

Susceptible to Environmental Stress Cracking

Excellent Chemical Resistance

Low Strength, Stiffness and maximum Service Temp

Very Good Processability

High Gas Permeability, particularly Carbon Dioxide

High Impact Strength at Low Temperature

Poor UV Resistance

Excellent Electrical Insulating Properties

Highly Flammable

Very Low Water Absorption

High frequency Welding and Joining Impossible

FDA Compliant

 

Can be transparent in thin film form

 


Product Code: LDPE
RELATED COMPANIES

Indiamart

Terms of Use - Privacy Policy - Link to Us

Copyright © 1996-2014 IndiaMART InterMESH Ltd. All rights reserved.