Sonisat Machine Tool Accessories Private Limited

For rotational turning of work pieces on their entire length without using any job carrier with high precision. Developed according to the modular design principle, therefore a universal exchange of driving discs and centres hydraulic respectively mechanical pressure compensation provides a uniform clamping force also on uneven faces of work pieces. The spring loaded centre provides a longitudinal work piece stop on the front size.

With mounting shanks can be delivered for all common tapers and spindle noses of different boring machines, milling machines and machining centres, e.g. ISO Tapers, BT Tapers, CAT Tapers, etc.Face Mill Arbors are made of case hardened steel (55-58 HRC). Suitable PULL STUD can also be provided.

The purpose of the Floating Reamer Holder is to compensate misalignment between tool and work- where reaming, tapping or similar operations are being performed in different stations after holes are drilled. It is available in different tapers.

Cylinder Hone set range includes cylinder body fitted with one standard carrier set of range 9001 fitted with honing stones of coarse grit. Extra carrier sets 9002 and 9003 would increases size upto 900 mm.

Cylinder Hone consists of one body, with standard carrier set no. 751 fitted with honing stones of coarse grit. It is coupled with universal joint. Its range is 50mm-75mm.

Cylinder Hone consists of one body, with standard carrier set no. 631 fitted with honing stones of coarse grit. It is coupled with universal joint. Its range is 38mm-63mm.

Cylinder Hone set Range includes cylinder body fitted with one standard carrier set of range 2501 fitted with honing stones of coarse grit. Extra carrier sets 2502 and 2503 would increases size upto 250 mm.

Micro-Cut Boring Arbors are available in different lenghts and tapers like BT, CAT, ISO, MT, etc. Brazed as well as indexable complete Microbore units are also available.

the new range of micrometer spacing collars was introduced in january 1970 in order to meet the industrial change to metric measurements. The calibrations on these new instruments may be read off as increments of 0. 001" or 0. 025mm these new micrometer spacers are provided with a screw thread of 1 mm pitch and the outer members carry an engraved scale of 40 divisions, each division=0. 025mm or 0. 001" and every fourth division is numbered and may be read off as increments of 0. 1mm or 0. 004". When two or more milling cutters are assembled on an arbor, it is essential to maintain accurately, the spacing dimensions between cutters, throughout production. The usual method is to use one or more solid collars, shims and even pieces of paper to give the exact spacing required. Theoretically, the machined dimensions should of course coincide precisely with the cutter spacing, but due to discrepancies that may exist on the teeth of the cutters,or accumulated error due to slight variations in the widths of the collars employed, a trial cut may reveal a departure from machining limits in one or more positions. "euco" micrometer spacer and collar provide a means of quickly and accurately assembling milling cutters in any desired combination and subsequent discrepancies can be indistrubing the set up the "euco" method is very simple. When the spacing dimension is outside the range of the micrometer spacer, just add the nearest size plain collar.

With lateral locking for straight shank cutters are available in different tapers - BT, ISO, CAT, etc. They are made of case hardened steel (55-58 HRC). Suitable PULL STUD can be also supplied.

arbor made of case hardened steel (55-58 hrc) is suitable to hold cutters and shell mills. Available in taper iso,bt, cat etc. Suitable pull stud is supplied, if required.

Increases pullout resistance over conventional chucks.

Square of the Tap engages the square in the sleeve giving positive drive. It can be used for accurate tapping on various machines. Similar Sleeves are also available for straight shank drill and centre drills.

are made out of case hardened steel supplied with key and bolts in iso tapers and morse tapers. Arbor available in different dia. Such as m16, m22, m27, m32, m40, m50 or 3/4", 1", 1 1/4", 1 1/2" and 2".

the tool holders for turning centres are manufactured as per din 69880 (vdi 3425) and are made of case hardened steel like en 353 / 20mn cr5. The tool holders are hardened and ground as per specification. These holders are available in different sizes ranging from 20mm to 80mm for axial and radial types of operations.

Are used for holding taper shank cutters (Tang type & Draw bolt type) on ISO taper milling machine spindles. They are made of case hardened steel (55-58 HRC) & are available in different tapers like ISO, MT, Metric, etc.

Collets are available in different shapes like round (available above 3mm), hex, square, octagon and decagon. They are made to customers’ specification for machines like Herbert, Ward, Skoda, Traub, Index, CVA, BSA, Brown & Sharp, Batchler, HMT, Petler etc.

Can be used in high precision operation where stability and gripping of the tool is essential. Keyless Drill Chucks are available in various sizes up to 16mm.

various grinding spindles like internal grinder, surface grinder, profile grinder, thread grinder and any spindle as per client specificationsis available with us. Spindles available from 10,000 rpm to 40,000 rpm.

Can be used in high precision operation where stability & gripping of the tool is essential. Keyless Drill Chucks are available in various sizes up to 16mm. Arbors are available in different tapers, like BT, CAT, MT, ISO, etc.

Range of Collets is 3mm to 50mm comprising of different models. The front angle provides a additional grip. The Chuck provides additional grip, easy operation and better concentricity.