Saviour Orthotech Private Limited

We are presenting a range of D.C.P. And D.H.S Plates in superior XL quality DHS, HIP screws and Plates in round and DC Holes manufactured for use in orthopedic surgery. The dimensions and the specification are made as per the international quality standard.

The features of these plates are;

• Long life


• Durable


• Cost effective


• Water and corrosion resistant

Specifications:

• 37MM- 55MM X 125MM- 163MM

(STAINLESS STEEL
XL )

We are offering a range of Cancellous Screws,  cannulated screw, malleolar screw which are available in different sizes and thread specification and are widely used for Orthopedic Usage. These Screws are made with AISI 316-L type stainless steel and are in compliance to defined industry standards.

The specifications of the Cancellous Screws are:

• 3.5MM X 10MM – 60MM


• 4.0 MM X 10MM –
  60MM (PARTIALLY & FULL THREADED)


• 6.5 MM X 25MM-
  120MM ( 16MM/32MM/FULL THREADED)

The features of Cancellous Screws are:

• Pullout strength


• Cost effective


• Easy for use

These Plates are designed for distal tibia in such a manner that they are proven to be perfect solutions for minimizes primary and secondary loss of reduction. There are two categories of these plates. These plates are enabled with a tab which provides a stable  support for the medial malleolus and also without tab.


The plates with the tab are used for:

• Extra- and partially intra-particular fractures of the distal tibia


• Fractures of the distal tibia with involvement of the medial malleolus

The  plates without the tab are used for:

• Fixation of complex intra- and extra-articular fractures of the distal tibia


• Osteotomies of the distal tibia

The features and benefits of the Tibia Plates are:

• Minimal contouring required due to the anatomically shaped plates


• Thin profile avoids damage to the surrounding soft tissues


• Apered tip and smooth plate design enable less invasive insertion


• The distal locking screws diverge across subchondral bone and allow for a good fixation also in osteoporotic bone


• The plate without

Specifications:

• tibiya plate 3holes – 18 holes


• femur plates 4 holes- 18 holes

 
 

Saviour Orthopedics (P) Ltd , is engaged in the manufacture of  orthopedic cortical screws and malleolar screws. We are one of the most reliable organizations in our sphere catering to various hospitals.  We have much specification available with us with different sizes and dimensions.

The specific of Cortical Screws are:

• 3.5MM X 10MM – 70MM


• 4.5MM X 10MM- 70MM


• 5.0MM X 10MM – 70MM

( LENTH WITH 2MM DIFFRENCE)

Our company is engaged in executing a range of DHS/DCS Plates
to various hospitals across the country. These Screws have achieved great
accolades in the market due to the finishing and the latest designs. These are
highly used in various orthopedic Surgeries with affectivity.

Specifications:

• 1200- 1450 X 4HOLES – 20 HOLES DHS
  PLATES


• 950 X 4HOLES –
  20 HOLES DCS PLATES


• DHS /DCS
  CORTICAL SCREW 50MM – 110 MM

An implant assembly of flexible nails
for fractures of long bones comprises of a straight universal length
flexible nails having properties of ductility as 15% to 25% of
elongation of nail and ultimate tensile strength of 600 to 800 Mega
Pascal on testing, having an identical pathfinder blunt conical tip
at both ends, an optional proximal fixation device with optional
plural holes for interlocking screws to be used in combination with
said flexible nails having peripheral equally spaced plural grooves
deep less than diameter of one said flexible nail, a end cap with
plural holes to be used in combination with said proximal fixation
device to anchor cut hooked ends of said flexible nails and a tool
plier_knurler cum cutter temporarily applied when said flexible nails
are alone in use.

Specifications:

• 3.5MM X 12cm – 42 cm


• 4.0 MM X 18cm- 46 cm


• 4.5 MM X 20cm- 48cm

          

Our range of universal femur nails is used in different orthopedic implants. These universal femur nails can also be customized and manufactured as per the clients' requirements. These Nails are made with high quality raw material and are widely accepted in medical purposes.

The features of the Femur Nails are:

• Durable


• Corrosion resistant


• Available in different sizes and shapes

We are offering a wide range of Humerus Interlocking Nails such as  different types of screws, bone taps, drills are suitable for  various requirements in the orthopedic surgeries and medical laboratories. We make sure that the quality of these Nails is up to the mark and free from any defect and fault. Further, we are also manufacturing  Hexagonal Screwdrivers for surgical procedures.

The types are Screws are:

• Drill Bit Quick Coupling End


• Drill Bit Quick (Plain Shank)

The features of Humerus Interlocking Nails

• Made with AISI 316-L type stainless steel


• Assures safety


• Hygiene


• Durability

Specifications:

• DIA 6.7 MM


• LENTH 19CM – 31
  CM

(WITH DIFF. OF 1CM)

We are manufacturing an array of Interlocking femur & tibia nails are available in several sizes . These nails are made with hiaigh quality of steel and fabricated under the strict quality observation. We make sure that the dimensions and the sizes match the international standards.

The features of Interlocking nails are:

• Available in various sizes and dimensions


• Compact but strong


• Corrosion resistance

Specifications:

• FEMUR NAIL (8mm – 13mm) X (28cm- 40
  cm)


• TIBIA NAIL (
  9mm-12mm) X (24cm- 44cm)

(WITH 2 CM
DIFFRENCE)

We are manufacturing and supplying a wide range of Interlocking Screws which are  inserted prior to the proximal interlocks and allows the let to be  rotated in the most advantageous position for interlock insertion and allows more efficient compression.                        

The features of Interlocking Screws are:

• free hand technique


• perfect circle w/o rotating distal fragment


• Easily jointed

Specifications:

• 3.0MM X 16-60MM


• 3.9MM X 16-60MM


• 4.9MM X 24-120MM

( WITH DIFF. OF 2MM
)

Prostheses are an artificial extension that is used to replace a missing or defective body part. We are offering a range of Prosthesis which is available for Leg, Hip and Ear. These Prostheses are made of high quality stainless steel to ensure that they would last a lifetime without any defects.

The features of this Prosthesis are:

• Superior strength


• Zero percent corrosion


• Cost effective

Specifications:

• tibiya plate 3holes – 18 holes


• femur plates
  4 holes- 18 holes

We are one of the most reliable organizations in our sphere catering to various hospitals and orthopedic surgeon. These pin are available in various sizes and widths. However we are able to manufacture these pin as per the client’s specifications also.

• Made with high quality of steel


• Compact and easily fixed


• water and corrosion resistant