 |
Power & Distribution Transformers
|
We are engaged in manufacturing of power and distribution transformers for turnkey projects. These are widely used in various industries owing to their high quality and durability. We test these stringently for quality and provide these in customized sizes and specifications as per the requirements of the clients. Our huge range includes the following:
|
 
| Oil Cooled Transformer We are manufacturing a wide range of oil cooled transformer which are designed for quite operation for single or three phases. These oil cooled transformer are available in a wide range of output voltage as per customer requirements. The features are as follows: - Cooling radiators for efficient operation
- Designed to withstand short-circuit forces
- Flexible tapping range as per customers requirement
- Available with off circuit and On Load tap Changers
Raw Material Used: - Cold Rolled Grain Oriented Silicon Steel coated with carlite is used for core assembly.
- Double Paper Covered conductor with sufficient insulation is used for windings in the HV and LV coils.
- Insulating Boards is used to give protection to coil ends and to act as barriers in between phases
- Insulating mineral oil used as a coolant.
|
 
Rectifier Equipment We are manufacturing a wide range of Rectifier Equipment designed for 3 phase 50 Hz AC input supply and are suitable for operations at any voltage between 380 to 440 Volts. These are manufactured of sturdy and liberally rated silicon diodes arranged in a six-phase/ three phase bridge circuit. The varying numbers of diodes are connected parallel depending on the output rating of the unit. These are also mounted on Aluminum heat sink assemblies, with the condensers across each diode, which enables in the hole storage protection. While using these, the input to the rectifiers should be connected through a proper protective device, in order to offer positive protection to the personnel and the system. This also helps in the maintenance of the fault.
| |
| Lighting Transformer We offer our clients with lighting transformer which are designed for quite operation. These lighting transformer are available in a wide range of output voltage as per customer requirements. The features are as follows: - Can be designed for single or three phase.
- Cooling radiators for efficient operation.
- Designed to withstand short-circuit forces.
- Flexible tapping range as per customers requirement.
- Available with off circuit and On Load tap Changers.
|
Servo Controlled Voltage Stabilizer We offer our clients with high efficiency servo controlled voltage stabilizers ideal for weather conditions in Indian subcontinent. These stabilizers work well under voltage fluctuations and helps in obtaining one output. The features are: - Fast acting
- Variation in the supply, frequency, load and P.F. does not have effect on the output voltage setting
- The stabilizer is provided with a fully solid state voltage sensing relay using professional grade components
- The important components of the stabilizer are made under strict quality control.
- The servo stabilizer has a long term stability and efficiency as high as 95%.
- It is provided with a drive motor that has a high torque, low speed out put and short-circuits proof.
- It has an output setting of /- 5 Volts and a proper indication for "Power ON", "Input too low" & "Input too high".
| |
| Dry Type Transformer We are offering our clients with dry type transformer at highly competitive prices. These dry type transformer have Fin type radiators for better cooling efficiency and Paint shade as per IS / IEC standard. The features are: - Standard Technical Specification
- 3 Phase, 50Hz in voltages of 11kv,22kv and 33kv
- Ratings available from 15kVA up to 3.15MVA
- Standard Output Voltage ranges 415/433V
- Off circuit tap changer to provide 5% to -10% taps in steps of 2.5%
- On load tap changer to provide 5% to -15% in steps as required by the customer (9 position or 17 position)
- Vector group Dyn-11
- Continuous duty
- Copper or Aluminum wound
- Standard fittings as per IS 2026/IEC standard
- Terminals provided with cable Box on LT & HT side
|
Furnace Transformer We are offering our clients with qualitative range of furnace transformers meant to be used with arc or induction furnaces of all sizes such as electric arc furnace transformers and induction furnace transformers. These furnace transformers are widely used in steel plants, gas factories, calcium carbide and various other industries. These come with various distinguishing factors that provide them superior functioning rate as well as durability. We offer these high-power transformers with automatic on and off cooling facility. | |
|
 |
|
 |
|
© Southern Equipments. All Rights Reserved (Terms of Use)