We offer Sine wave Inverter- 600 VA that appreciated by the clients for high quality standards. These are manufactured suing quality material and offered with proper protection against output overload & short circuit, output over voltage and battery low. Our Sine wave Inverter- 600 VA has the indications for mains ON, inverter ON, battery low, overload and charging ON / LCD optional. This inverter is also offered with changeover of Electromechanical Switch. Moreover, following are the other technical specifications of our Sine wave Inverter- 600 VA:

AC Input:

• Rating: 600 VA
• Voltage: 230V+20% - 30%
• Frequency: 50Hz ±10% 
• Phase: Single Phase

DC Voltage: 12 Volt

• Inverter Capacity: Battery Voltage
• 600VA: 12V
• Charging current: 10 Amps
• Charger Type: SMPS

Inverter:

• Technology: Mosfet
• Output voltage: 230V AC single phase                         
• Voltage regulation: ± 2%
• Frequency: 50hz ± 0.5HZ
• Waveform: PWM sine wave
• Harmonic distortion: less than 3% (no load to full load)
• Inverter efficiency: >85%
• Power factor: 0.8
• Overload: 150% for 30 sec.
• Audible noise: less than 45 DB at 1 meter

General:

• Dimensions (L x W x H): 350 x 350 x 180 mm
• Operating temperature: upto 500 degree C
• Humidity: Max 95%, Non-condensing

We are offering Sine wave Inverter- 800 VA that is wide appreciated by the clients for optimum performance and durability. Manufactured using quality raw material, this Sine wave inverter is assured to have high quality standards. This is also offered with electomechanical switch as a standard feature for the customers. Our Sinewave Inverter- 800 VA also has protection from output overload & short circuit, output over voltage and low battery. This inverter has following technical specifications:

AC Input:

• Rating: 800 VA
• Voltage: 230V + 20% - 30%
• Frequency: 50Hz ± 10% 
• Phase: Single Phase

 
DC Voltage: 12 Volt

• 800VA: 12V
• Charging current: 10 Amps
• Charger Type: SMPS

Inverter:

• Technology: MOSFET
• Output Voltage: 230V AC Single Phase                          
• Voltage Regulation: ± 2%
• Frequency: 50Hz ± 0.5Hz 
• Waveform: PWM Sine wave
• Harmonic Distortion: Less than 3% (no load to full load)
• Inverter Efficiency: >85%
• Power Factor: 0.8
• Overload: 150% for30 sec
• Audible Noise: Less than 45 dB at 1 Meter

Indications:

• Mains ON, Inverter ON, Battery Low, Overload, Charging ON / LCD Optional
  

General:

• Dimensions (L x W x H): 350 x 350 x 180 mm
• Humidity: Max 95%, Noncondensing

We are engaged in providing Sine wave Inverter- 1400 VA / 2 KVA that are manufactured using quality raw material. Offered with electromechanical switch, our Sine wave Inverter- 1400VA / 2 KVA also provide protection against output overload & short circuit, output over voltage and low battery. Furthermore, following are the other technical specifications of our Sine wave Inverter- 1400 VA / 2 KVA:

AC Input:

• Rating: 1400 VA/ 2 KVA
• Voltage: 230V + 20% - 30%
• Frequency: 50Hz ± 10% 
• Phase: Single Phase

DC Voltage: 24 Volt

• 1400VA / 1200W: 24V
• 2 KVA / 1600 W: 24V / 36V / 48V
• Charging current: 10 Amps
• Charger Type: SMPS

Inverter:

• Technology: MOSFET
• Output Voltage: 230V AC Single Phase                          
• Voltage Regulation: ± 2%
• Frequency: 50Hz ± 0.5Hz 
• Waveform: PWM Sine wave
• Harmonic Distortion: Less than 3% (no load to full load)
• Inverter Efficiency: >85%
• Power Factor: 0.8
• Overload: 150% for30 sec
• Audible Noise: Less than 45 dB at 1 Meter

Indications:

• Mains ON, Inverter ON, Battery Low, Overload, Charging ON / LCD Optional
  

General:

• Dimensions (L x W x H): 350 x 350 x 180 mm
• Operating temperature: 00C to 500C
• Humidity: Max 95%, Non-condensing

We are offering Sine wave Inverter-3 KVA that is manufactured using quality raw material and assured to have high quality standards. This Sine wave inverter is offered with protections against output overload & short circuit, output over voltage and low battery. Our Sine wave Inverter-3 KVA also has a changeover electomechanical switch as a standard model. Following are some of the technical specification of our range of Sine wave Inverter-3 KVA:

AC Input:

• Rating: 3 KVA
• Voltage: 230V + 20% - 30%
• Frequency: 50Hz ± 10% 
• Phase: Single Phase

DC Voltage: 48 Volt

• 2400 W: 36V / 48V
• Charging current: 10 Amps
• Charger Type: SMPS

Inverter:

• Technology: MOSFET
• Output Voltage: 230V AC Single Phase                          
• Voltage Regulation: ± 2%
• Frequency: 50Hz ± 0.5Hz 
• Waveform: PWM Sine wave
• Harmonic Distortion: Less than 3% (no load to full load)
• Inverter Efficiency: >85%
• Power Factor: 0.8
• Overload: 150% for30 sec
• Audible Noise: Less than 45 dB at 1 Meter

 
Indications:

• Mains ON, Inverter ON, Battery Low, Overload, Charging ON / LCD Optional
  

General:

• Dimensions (L x W x H): 400 x 300 x 400 mm
• Humidity: Max 95%, Non-condensing

We are offering Single Phase Sine Wave Inverter 5 KVA that are designed and developed using latest and advanced technologies. These are offered with metering using microprocessor based digital LCD meter for output voltage, output current & frequency, dc voltage, battery and load percentage. Our Single Phase Sine Wave Inverter 5 KVA is offered with protection against output overload & short circuit, output under & over voltage and DC under & over voltage. Our Single Phase Sine Wave Inverter 5 KVA ahs following technical specifications and features:

Model: Vista 5000

• Rating: 5 KVA 
• AC Input: 230V +20% -30% Single Phase Input
• Frequency: 50Hz ± 10%
• DC Voltage: 180 VDC
• Charging Time: 12 Hours for 90% of full Capacity
• Charger Type: CVCC Internal Controlled Rectifier type

Inverter:

• Technology: IGBT Double Conversion
• Output Voltage: 230V AC Single Phase
• Voltage Regulation: ±2% % for DC I/p variation & o/p load  variation
• Frequency: 50Hz ± 0.5Hz
• Waveform: PWM Sine wave
• Harmonic Distortion: Less than 3%
• Inverter Efficiency: >90% 
• Power Factor: 0.8
• Overload: 150% for 30 sec
• Crest Factor: 3:1
• Audible Noise: Less than 45 dB at 1 Meter

General:

• Dimensions (L x W x H): 740x 350x 800 mm
• Operating temperature: 00C to 500C
• Humidity: Max 95%, Non-condensing

Indications & Alarms:

• Mains on: Indication
• Inverter on: Indication
• DC Low: Indication & Alarm
• Fault: Indication & Alarm
• Output Overload: Indication & Alarm

Changeover:

• Static Switch - Manual: Bi-directional

We provide Three Phase Sine Wave Inverter 10 KVA that is appreciated by the clients for high quality standards and optimum performance. These are offered with protection functions against Output Overload & Short circuit, Output under & over voltage, DC under & over voltage Input under & over voltage and Single Phasing & Phase unbalance. Our Three Phase Sine Wave Inverter 10 KVA also has a metering device using Microprocessor based Digital LCD Meter. This metering is used for R, Y, B output voltages, output currents & frequency, DC voltage, battery and load percentage. Following are the specifications and features of our Three Phase Sine Wave Inverter 10 KVA:

Model: Maxi 10000

• Rating: 10 KVA 
• AC Input: 415V + 15%  -20%  Three Phase Input
• Frequency: 50Hz ± 6%
• DC Voltage: 180/ 360VDC
• Charging Time: 12 Hours for 90% of full Capacity
• Charger Type: CVCC Internal Controlled Rectifier type

Inverter:

• Technology: IGBT Double Conversion
• Output Voltage: 400V AC Three Phase
• Voltage Regulation: ±2% % for DC I/p variation & o/p load  variation
• Frequency: 50Hz ± 0.5Hz
• Waveform: PWM Sine wave
• Harmonic Distortion: Less than 3%
• Inverter Efficiency: >92% 
• Power Factor: 0.8
• Overload: 150% for 60sec
• Crest Factor: 3:1
• Phase Displacement: 1200 ± 10
• Audible Noise: Less than 50 dB at 1 Meter

General:

• Dimensions (L x W x H): 1040 x 350 x 910 mm
• Humidity: Max 95%, Noncondensing

Indications & Alarms:

• Mains on: Indication
• Inverter on: Indication
• DC Low: Indication & Alarm
• Fault: Indication & Alarm
• Output Overload: Indication & Alarm

Changeover:

• Static Switch - Manual: Bi-directional

We manufacture a wide range of Digital Inverters that are able to produce high power and voltage. These inverters contain a constant voltage limit charger with a Mosfet technology and are available in various sizes. Further, these are also suitable for single and three phase load. It does not generate any noise or pollution and is designed for tropical conditions. Following are some of the technical specifications of our Digital Inverters:

• Rating Available: 350 VA, 650 VA, 800 VA, 850 VA
• Nominal Input: 220 +/-10 % VAC, Single phase, 50 Hz
• Input Voltage Range: 110 Volts to 230 Volts
• Input Output Voltage: 230 Volts +/- 10 % AC
• Battery Charging: Phase Control Charger
• Audio Alarm: High pitch Buzzer for overload & low Battery indication
• Voltage Control Type: PWM
• Audio Alarm: High pitch Buzzer for overload & low Battery indication