Leveraging on our industrious experience, we offer high performance Lubrication Pumps to our clients. These pumps can be customized according to the specifications of the clients and their particular requirement. We offer two types of lubrication pumps that are:

• Motorised Lubrication Pumps
• Manual Lubrication Pumps
  

MOTORISED LUBRICATION PUMP
MODELS	TECHNICAL FEATURES
CLU-03	Reservoir Cap. 3 Ltrs. Discharge 1Lpm Motor .09 KW, 4 pole, 3 phase, 415 VAC. Pressure setting 15 kg/cm2 with pressure switch & float switch.
SLU-2700	Reservoir Cap. 2.7 Ltrs.(Transparent) Discharge 1Lpm. Motor 0.09 kw, 4pole, 3phase, 415 VAC. Pressure setting 12 kg/cm2 with pressure switch and float switch.
CLU-05	Reservoir Cap. 5Ltrs. Discharge 1Lpm. Motor 0.18kw, 4pole, 3phase, 415 VAC. Pressure setting 15-20 kg/cm2 with pressure switch & floot switch
CLU-08	Reservoir Cap. 8Ltrs. Discharge 3Lpm Motor 0.18kw, 4pole, 3phase, 415V AC. Pressure setting 20kg/cm2 with pressure & float switch.
CLU-30	Reservoir Cap. 30 Ltrs. Discharge 3 Lpm Motor . 37Kw, 4pole, 3 phase, 415V AC. Pressure Setting 5 kg/cm² with pressure switch & float switch.
HYLU-30	Reservoir Cap. 30 Ltrs, Discharge 3 Lpm. Motor .37 kw, 4pole, 3 phase, 415V AC Pressure switch, float switch, return line filter with 2 port, 1st for continuous lubrication.(Low Pressure setting 5 kg/cm²) 2nd for intermittent lubrication. (High Pressure setting 20kg/cm²)
MANUAL LUBRICATION PUMP
H-1700-10	Reservoir (Aluminium / Acrylic)Capacity 1.7 ltrs Pr.Setting 12 kg/cm2 Discharge 10cc/stroke.
H-600-6	Reservoir (Aluminium / Acrylic) Capacity 1.7 ltrs Pr. Setting 12 kg/cm2 Discharge 10cc/stroke.
H-250-4	Reservoir (Aluminium / Acrylic) Capacity 0.25 ltrs Pr. Setting 12 kg/cm2 Discharge 4 cc/stroke.

Used in various industries, our Manual grease pumps are widely known for their compact size and rigid construction. The pump is specially designed with minimum moving parts so as to make it long lasting and absolutely trouble free operation. Further, it comprises physical aspects such as:

• Minimum maintenance
  
• Easy to Operate
  
• Energy saving

APPLICATION: This pump meant for feeding grease to bearing and other moving part of machines and other lightly machines having 1 to 20 lubrication point.

WORKING: On pulling the handle of pump, grease are sucked through suction port on pushing handle of pumpt grease comes out under pressure through check value. Spring pressure through follower plate exerted over the top surface of the grease further helps to push the grease in suction port.

EQUIPMENT: Pump is made up of purely transparent acrylic reservoir for storage of grease. For sensing the Grease level a tell tale rod is provide and follower plate assembly for help in positive suction of grease. It contains two outlet part of 1/4" BSP right and left side in which one is used as air bleed valve and second port used as a outlet. To check reverse flow of grease, a non return valve is provide in the system of the outlet port.

FILLING OF GREASE: Grease can be filled manually or with another pump. Filling from pump 1/4: part is provide. Manually, we have to remove follower plate, spring, top cover and fill the grease from the top of the reservoir and to fit all the components by pressure. For air removing unscrew the bleed plug put the handle maximum out and press the follower plate by knob till grease comes out from bleed plug.

DISTRIBUTION SYSTEM: A Progressive block is used to distribute the grease to the available lubrication points in sequence one after another, Progressive Blocks are added as per requirement.

TECHNICAL SPECIFICATIONS:

Model	Reservoir Capacity	Discharge	Maximum Pressure	Vertical Wall Mounting
MGP - 500 - 3	.5 kg.	3cc Per Stroke	70 kg./cm2	4 Holes, 7 Dia.
MGP - 1000 - 4	1 kg.	4cc Per Stroke	100 kg./cm2	4 Holes, 7 Dia.
MGP - 1500 - 6	1.5 kg	6cc Per Stroke	120 kg./cm2	4 Holes, 9 Dia.

We manufacture Pneumatic Pumps which are highly durable as well as reliable. These grease pumps are designed according to the technical specifications provided by the client. Our pumps are also corrosion resistant and require less maintenance.

APPLICATION: The pneumatic grease pump is suitable for dispensing of grease and automatic feeding of grease to bearing and other moving parts of machines. Such as milling machine rolling machine, presses and hammers, rubber processing machine, die casting machine, furnaces etc. The pump is suitable for grease upto NLG-2. For distribution we used progressive blocks through this pump.

WORKING: Pneumatic grease pump are operated through pneumatic line, connected to the ports of pneumatic cylinder. The cylinder is built in with the pump housing. Druign on period of the pneumatic line a piston inside the cylinder is pushed ejecting out grease from the outlet port of the pump housing. During the reverse flow of pneumatic line grease is sucked through the suction port. In the pump spring force through follower plate exerted on the top surface of the grease make the suction of the grease positive and easier. Pneumatic pump is available in adjustable discharge and multi port with adjustable discharge in each port. Discharge and reservoir of pump is available as per customer requirement.

AIR REMOVING: For air removing, un screw the bleed plug apply compressed air and press the grease pusher by knob till grease come out from bleed port and plug the bleed port. The pump is ready for peration.

CONSTRUCTION: There is a reservoir mounted on the pump body for storage of grease. A tell tale rod connected for sensing grease level.

• Check valves is fitted on the outlet port of the pump to stop reverse flow of grease into the pump through outlet port.
• To bleed air entrapped in the system, there is a plug on the pump body which is to be opened fill continuous flow of grease starts coming.
• The adjusting screw is provided in order to vary in output of the grease by tightening the screw the output of grease decreases and vice versa.
• It is must to put filter regulator unit in the pneumatic line fed to the pump. This will ensure that pneumatic line going to the pump is dust and moisture free.

FILLING: Grease filling in the reservoir can be done manually as well as with the help of other pump. For these who wants to fill grease by another pump, a 1/4" BSP ports is provide on front side of the pump. This port is normally plugged.

We manufacture Pump and motor pump assembly with following specifications.

MOTOR PUMP ASSEMBLY
MODEL	DISCRIPTION
MPA 1	Discharge 1 Lpm.
MPA 3	Discharge 3 Lpm.
MPA 6	Discharge 6 Lpm.
MPA 10	Discharge 10 Lpm.

ROTARY PUMPS
PP- 1	Discharge 1 Lpm.
PP- 3	Discharge 3 Lpm.
PP- 6	Discharge 6 Lpm.
PP- 10	Discharge 10 Lpm.
RPP- 1 (Reversible)	Discharge 1 Lpm.
RPP- 3 (Reversible)	Discharge 3 Lpm.
RPP- 6 (Reversible)	Discharge 6 Lpm.
RPP- 10 (Reversible)	Discharge 10 Lpm.

We offer superior quality Mist Lubrication System that are highly functional. For high rotational parts it is desired to lubricate and cool the lubricating parts, hence oil along with air is used to lubricate and cool the parts. It is used to spraying of oil or grease to the parts and others such methods.

APPLICATION: S.P. Introduce Mist Lubrication System which is best suited for conveyor, Machine tools spindle, Chain Sponge iron plant and Cement plant bearing, etc.

CONSTRUCTION: In M.L.S. used the pump for carrying the oil up to atomizer. In atomizer two port is provided one for oil another for air. This pump is pneumatically operated as well as motorized.

Pneumatic, pump issuitable for intermittent lubrication. We can get continuous lubrication also. In this pump on acrylic / metallic reservoir with a capacity 1.5 Ltr. (accordingly customers requirements also.) and oil filling port is provided on the top. Through air pressure. Oil comes in junction block (atomizer).

Motorised pump is suitable for continuous / Intermittent and multi point lubrication. Through motorized pumps lubrication come in atomizer with the help of progressive block / metering cartridge / control valve from the atomizer we get the mist lubrication.

WORKING: M.L.S. is basically pneumatic operated. Air controlled by on off solenoid valve.

The air is used for broken the oil in small fragranents (1-5 micron) for this work is one port air and another oil fed in atomizer. From the outlet of atomizer made mist lubrication. Feeding the oil upto atomizer we used motorized / pneumatic pump.

We manufacture and supply dual line lubrication systems that of standard quality.

 APPLICATION
Dual line system is used where large distance in lubrication point, This is high pressure pump and use in steel plants, cement plants. Turbine generator, furnaces, sugar plants, spong iron plant etc.

CONSTRUCTION
Dual line lubrication system comprising of a single pumping station having pumping elements and fitted on the outer periphery of the housing. Reservoir also mounted on housing and fitted on base plate with moot, gear box. Change over valve, pressure gauge etc.

WORKING
In dual line lubrication pump the p umping elements push the grease of high pressure (up to 250 kg/cm2) with the help of cam. Cam is driven by speed reduction gear, Grease feed in change over valve from pump elements, Change over valve is to deliver grease through one of the out let parts alternatively after receiving signal from end pressure relay, Distribution of grease at different lubrication point done by Dose feeder and this pump operate by the control panel.

DOSE FEEDER
Dose feeder having two inputs to be connected with DUAL line which coming from the pumping station. Out lets connection of dose feeder are connect to lube points by branch pipe line. Functioning of each dose feeder can be checked by the movement of indicating pin. Dose feeder available from one out let to six out lets.

END PRESSURE RELAY
It sense the end pressure and gives signal to change over valve through control panel. For checking the pressure to pressure gauge are provided.

ELECTRIC CONTROL PANEL
Electric control panel is required for operate the lubrication system. Panel has the features main on lubrication , Manual and auto mode indication, Line one and tow on indication, Line fault indication,l Moto trip indication, emergency stop button and other standard control. This control panel is available as per customer requirements.

GREASE TRANSFER PUMP
Grease transfer pump is penumatic version. This pump is directly mounted in the barrel. It transfer grease to the reservatir of pumping station.

We are engaged in manufacturing and supplying oil circulation system that is of supreme quality.

APPLICATION: S.P. introduce O.C.S. (oil circulating system) which is best suited for paper industry, steel plant, sugar plant etc.

CONSTRUCTION: In O.C.S. We use the gear pump / screw pump discharge upto 600 LPM driven by electric motor. Pump is connected with reservoir. Reservoir capacity is depend on pump discharge. In line filter, cooler and other control with the gauge fitted by standard tubing and fitting on skid.

WORKING: In O.C.S. Oil is sucked from reservoir with the help of pump and ejected on lubrication point. Through filter and cooler, oil is returned in the reservoir by retuning line. Before pushing the oil again it should be clean with normal temperature.

No.	Parts Description
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21	Oil Tank Gate Valve Y-Type Stainer Pump Coupling Motor Pr Gauge Pr. Relief Valve Check Valve Pr. Switch Filter Temperature Gauge Oil Cooler header Ball Valve High Oi Level Switch Low Oil Level Switch Needal Valve Gate Valve Oil Level Gauge Manifold etc.

This Multiline Radial Lubricator provides a compact unit for delivered soft grease or heavy oil under pressure to a given number of different bearing points. It is ideal for lubricating machinery which require regular shots of predetermined quantity of lubricant forced into each individual bearing under pressure.

APPLICATION: Multiline radial lubricator is best suited for machine / plant where lubrication is required with high pressure continuously / intermittently for individual point. The lubricator are used for machine / plant like rolling mill, sugar plant, cement plant, rubber mixing machine, forging hammer, stone crusher, sponge iron plant etc.

FILLING OF LUBRICANTS: Grease filling in the reservoir can be done manually as well as with the help of other pump. For pump 1/4" BSP port is provided on reservoir.

INSTRUCTION:

• Always use proper and clean lubricants, Avoid foreign particles in the pump. The foreign particles or dust items are the main responsible factor to damage physical components of the pump and chocking in the plunger body.
• Always fill the lubricants before it is empty to avoid air in the pump. The presence of air may be resulted in improper quantity of discharge.
• Should always carefully with regular maintenance of plungers and reservoir for its long life.
• Do not plug out out of any pumping unit.

TECHNICAL SPECIFICATIONS:

Model	RL-1.5-4	RL-5-6	RL-15-12	RL-30-20	RL-70-30
Reservoir Capacity in Kg.	1.5	5	15	30	70
No. of Outlets (Pumps Elements)	4	6	12	20	30
Motor 3Phase, 415V AC, 4 Pole	0.25 HP	0.25 HP	0.50 HP	1.00 HP	1.50 HP
Delivery pressure Dose of Pump / Cycle (Adjustable) ReductionRatio of Drive	200kg/cm2 maximum 0.05cc to 0.25cc/Stroke/Pump (max. 5gm/min.) 70:1)

Parts of radial lubricator:

Plunger Pumps (Pumping Unit)

Plunger pump is a compact pump that gives metered amount a lubricant in every strokes. We can adjust the discharge by adjusting screw. Output can be vary from 0.05cc to 0.25cc/stroke & delivery pressure 200 Kg/cm3 max. The stroke of the plunger remains always same. The mounting threads of the plunger is M22X105. Plunger pump is also available in 0.5cc/stroke. 0.70cc/strke (Non Adjustable).

Progressive Distributor Blocks

S.P. Introduce progressive distribution blocks of PB-4555/ PB-6080 series are meant for distribution of grease/oil delivered by a pump. From this we get lubricant in sequently one after another. Any one outlet is blocked then the  progressive block will stop functioning. With suitable monitoring devices, this blockage is sensed and suitable warning is given to avoid running the machine without proper lubrication. These blocks can be used for intermittent/continuous lubrication. This block has three types of element--

• Starting Block
• Middle Block
• End Block

Each middle block has two outlet & minimum 0.03 middle block are required in progressive block we can add other middle block as per requirement.

We manufacture and supply various lubrication acessories that includes pressure gauge, pressure switch, oil filter cum air breather, suction trainer, suction trainer, etc.

PRESSURE GAUGE
P.G – 25/35	For measure the working pressure Range o-25, 0-35 Kg/Cm2
PRESSURE SWITCH
PS-830	Pressure switch use in motorised unit for Sensing pressure
PS-020	Pressure Switch use in motorised unit for Sensing pressure.

OIL FILTER CUM AIR BREATEHR
AB-03	For CLU – 03 / ALR – 03 Motorised Unit.
AB-05/08	For CLU – 05 / CLU – 08 Motorised Unit
SUCTION TRAINER
SS-08	For 3 Ltrs. Motorised lubrication unit.
SS-30	For 5 Ltrs./8Ltrs. Motorised unit.
SS-50	For PP-6 Pump/MPA 6 / MPA 10, Motorised lubrication unit.

We offer Electronic Timers and Controllers to our clients that are used in those lubrication systems where pressure switch and float switch are provided for sensing the pressure load as well as the low oil level. These systems have on time of 5 sec as well as an adjustable fixed and off time between 2 to 240 min.

Models	Technical Features
ET-5-30	ON time-5 sec. (fixed) OFF time 5-30 min. (Adjustable)
ET-60-240	ON time-5 sec. (fixed) OFF time 60-240 min. (Adjustable)
ET-2-30/2-60	ON time 2-30 sec.(Adjustable) OFF time-2-60mm (Adjustable)
Electronic Controller
ECW2-240 (Wall mounting)	ON time-5 sec. (fixed) OFF time 2, 4, 8, 15, 30, 60, 120 240 min. (Adjustable) with lubrication Fault & low oil level sensing
ECP-240 (Panel mounting)	ON time-5 sec. (fixed) OFF time 2, 4, 8, 15, 30, 60, 120, 240mm (Adjustable) with lubrication Fault & low oil level sensing
ECP 2-240 C (Panel mounting)	Controller built in contractor

We furnish Manifolds in various dimensions and specifications. Our range features high functionality and superior quality and are in compliance with international standards. Our products are also offered at customized specifications.

Models	Technical Features
M-1	One way (for single D1/D2 Metering Contridge)
M-2	Two way (for two D1/D2 Metering Cartridges)
M-3	Three way (for three D1/D2 Metering Cartridges)
M-4	Four way (for four D1/D2) Metering Cartridges)
M-5	Five way (for five D1/D2) Metering Cartridges)
M-6	Six way (for six D1/D2 Metering Cartridges)
M-8	Eight way (for Eight D1/D2 Metering Cartridges)
M-1A	One way (for single D3 Metering Cartridge)
M-2A	Two way (for two D3 Metering Cartridges)
M-3A	Three way (for three D3 Metering Cartridges)
M-4A	Four way (for four D3 Metering Cartridges)

METERING CARTRIDGE

MODEL	DOSAGE
D-1	0.01/0.03/0.05, 0.10/0.16 cc per cycle
D-2	0.25/0.40 cc Per cycle
D-3	1.0/1.6 c cPer Cycle

Our range of Tube Fittings are made up of high quality material including: brass, steel etc. depending upon various requirements of the end user. These tube fittings provide sturdy and tight integral line system.

Model	Description
Fitting for 4mm OD Tube
F-E-4T	Elbow M8 x 1 Or 1/8" BSP
F-B-4	Banjo M8 x 1 Or 1/8"
F-E-B-4	Elbow block
F-SC-4T	Straight connector M8 x1 Or 1/8" BSP
F-C-4	Connector block
F-CR-4	Cross block
Fitting For 6mm OD Tube
F-E-6T	Elbow Male thread 1/8" thread 1/8" BSP to right angle
F-B-6	Banjo Male thread 1/8" BSP to right angle
F-E-B-6	Elbow block for joining two tubes of right angle
F-SC-6T	Straight connector 1/8" BSP or M8 x 1 to connect 6mm tube of end point
F-T-6	Tee block for dividing main line into two lines
F-C-6	Connector block for joining two tubes
F-CR-6	Cross block dividingmain line into three lines
Fitting For 10mm OD Tube
F-SC-10	Straight connector
F-E-10	Elbow
F-B-10	Banjo
F-T-10	Tee block
F-C-10	Elbow block
F-CR-10	Cross block

TUBES
NT-4	Nylon tube 4 mm OD
NT-6	Nylon tube 6mm OD
NT-10	Nylon tube 10mm OD
ST-4	Steel tube (Copper Coated) 4 mm OD
ST-6	Steel tube (Copper Coated) 6 mm OD
ST-10	Steel tube (Copper Coated) 10 mm OD