Manual Grease Pumps

Used in various industries, our Manual grease pumps are widely known for their compact size and rigid construction. The pump is specially designed with minimum moving parts so as to make it long lasting and absolutely trouble free operation. Further, it comprises physical aspects such as:

• Minimum maintenance
  
• Easy to Operate
  
• Energy saving

APPLICATION: This pump meant for feeding grease to bearing and other moving part of machines and other lightly machines having 1 to 20 lubrication point.

WORKING: On pulling the handle of pump, grease are sucked through suction port on pushing handle of pumpt grease comes out under pressure through check value. Spring pressure through follower plate exerted over the top surface of the grease further helps to push the grease in suction port.

EQUIPMENT: Pump is made up of purely transparent acrylic reservoir for storage of grease. For sensing the Grease level a tell tale rod is provide and follower plate assembly for help in positive suction of grease. It contains two outlet part of 1/4" BSP right and left side in which one is used as air bleed valve and second port used as a outlet. To check reverse flow of grease, a non return valve is provide in the system of the outlet port.

FILLING OF GREASE: Grease can be filled manually or with another pump. Filling from pump 1/4: part is provide. Manually, we have to remove follower plate, spring, top cover and fill the grease from the top of the reservoir and to fit all the components by pressure. For air removing unscrew the bleed plug put the handle maximum out and press the follower plate by knob till grease comes out from bleed plug.

DISTRIBUTION SYSTEM: A Progressive block is used to distribute the grease to the available lubrication points in sequence one after another, Progressive Blocks are added as per requirement.

TECHNICAL SPECIFICATIONS:

Model	Reservoir Capacity	Discharge	Maximum Pressure	Vertical Wall Mounting
MGP - 500 - 3	.5 kg.	3cc Per Stroke	70 kg./cm2	4 Holes, 7 Dia.
MGP - 1000 - 4	1 kg.	4cc Per Stroke	100 kg./cm2	4 Holes, 7 Dia.
MGP - 1500 - 6	1.5 kg	6cc Per Stroke	120 kg./cm2	4 Holes, 9 Dia.