Multiline Radial Lubricator

This Multiline Radial Lubricator provides a compact unit for delivered soft grease or heavy oil under pressure to a given number of different bearing points. It is ideal for lubricating machinery which require regular shots of predetermined quantity of lubricant forced into each individual bearing under pressure.

APPLICATION: Multiline radial lubricator is best suited for machine / plant where lubrication is required with high pressure continuously / intermittently for individual point. The lubricator are used for machine / plant like rolling mill, sugar plant, cement plant, rubber mixing machine, forging hammer, stone crusher, sponge iron plant etc.

FILLING OF LUBRICANTS: Grease filling in the reservoir can be done manually as well as with the help of other pump. For pump 1/4" BSP port is provided on reservoir.

INSTRUCTION:

• Always use proper and clean lubricants, Avoid foreign particles in the pump. The foreign particles or dust items are the main responsible factor to damage physical components of the pump and chocking in the plunger body.
• Always fill the lubricants before it is empty to avoid air in the pump. The presence of air may be resulted in improper quantity of discharge.
• Should always carefully with regular maintenance of plungers and reservoir for its long life.
• Do not plug out out of any pumping unit.

TECHNICAL SPECIFICATIONS:

Model	RL-1.5-4	RL-5-6	RL-15-12	RL-30-20	RL-70-30
Reservoir Capacity in Kg.	1.5	5	15	30	70
No. of Outlets (Pumps Elements)	4	6	12	20	30
Motor 3Phase, 415V AC, 4 Pole	0.25 HP	0.25 HP	0.50 HP	1.00 HP	1.50 HP
Delivery pressure Dose of Pump / Cycle (Adjustable) ReductionRatio of Drive	200kg/cm2 maximum 0.05cc to 0.25cc/Stroke/Pump (max. 5gm/min.) 70:1)

Parts of radial lubricator:

Plunger Pumps (Pumping Unit)

Plunger pump is a compact pump that gives metered amount a lubricant in every strokes. We can adjust the discharge by adjusting screw. Output can be vary from 0.05cc to 0.25cc/stroke & delivery pressure 200 Kg/cm3 max. The stroke of the plunger remains always same. The mounting threads of the plunger is M22X105. Plunger pump is also available in 0.5cc/stroke. 0.70cc/strke (Non Adjustable).

Progressive Distributor Blocks

S.P. Introduce progressive distribution blocks of PB-4555/ PB-6080 series are meant for distribution of grease/oil delivered by a pump. From this we get lubricant in sequently one after another. Any one outlet is blocked then the  progressive block will stop functioning. With suitable monitoring devices, this blockage is sensed and suitable warning is given to avoid running the machine without proper lubrication. These blocks can be used for intermittent/continuous lubrication. This block has three types of element--

• Starting Block
• Middle Block
• End Block

Each middle block has two outlet & minimum 0.03 middle block are required in progressive block we can add other middle block as per requirement.