Material Handling Products |
|
|
We follow the principle of providing every support possible to our clients. We are not only into supplying business but we tend to take care of proper handling and maintenance of our Material Handling Equipments (MHE). We provide warranty period for maintenance and after that there is a provision of AMC that takes care of our products for long period and maintaining a good supplier-client relationship.
|
Hand Pallet Truck | These are available in three different capacities with model name – AC20, AC25 and AC30. These are provided with steering wheel to control the movements. The product features can be described as: | Item/Type | AC20 | AC25 | AC30 | | Capacity (Kg) | 2000 | 2500 | 3000 | | Min. fork height (mm) | 85 | 75 | 85 | 75 | 85 | 75 | | Max. fork height (mm) | 200 | 190 | 200 | 190 | 200 | 190 | | Steering Wheel (mm) | 200x50 | 180x50 | 200x50 | 180x50 | 200x50 | 180x50 | Load roller
(mm) | Single
Tandem | 82x93
82x70 | 74x93
74x70 | 82x93
82x70 | 74x93
74x70 | 82x93
82x70 | 74x93
74x70 | | Size of fork (mm) | 160x50 | 160x60 | | Widh overall forks (mm) | 450 / 520 / 540 / 685 | | Fork length (mm) | 800 / 900 / 1000 / 1067 / 1100 / 1150 / 1220 | | | Send Enquiry |
Electric Pallet Truck | These are made with excellent material which provides stability in Operations even when it is empty. The drive unit is equipped with an electromagnetic brake that is spring applied and has electrical release. Brake is activated by the control handle position. Lift limit switch operates at maximum lift height to shut off pump motor with Curtis Electronic Controller from Europe. Some of the salient features are: - WP-LPT15(AC)
- 3-phase AC drive motor
- Drive motor: KORDEL from Germany
- Controller: ZAPI
- Hydraulic motor: Imported from Europe
- Approved good acceleration enhances efficient pallet entry and exit to increase productivity.
- Non-polar Electronic-control is programmable for specific tasks or operator skill levels.
- Ergonomically designed control handle with buttons for raising, lowering and horning.
- Small and light, used in limited space.
- Lower lift cycle costs
- Longer operating time between recharge
- Regenerative braking
- High efficiency and allows the acceleration and braking on slopes
- Smooth travel and lift combine with excellent controls to reduce product damage and increase productivity.
- A heavy-duty 24-volt electrical system provides good travel and lift speeds.
- High quality hydraulic pump assures very little noise, maximum efficiency and durability.
- Conforms to EN1726 and EN1175-1
| | Send Enquiry |
Semi Electric Stacker | These are actually semi-electric in nature and hence are provided with electric or manual drives. We offer different models namely: SPM1516, SPM1525, SPM1530, SPM1535, and SPM1529FFL. Some of the typical technical specifications have been tabulated as: | 1.2 | Model of manufacture | SPM1516 | SPM1525 | SPM1530 | SPM1535 | SPM1529 FFL | | Drive: (electric-battery or mains,diesel,petrol,fuel gas manual) | | 1.3 | manual | | Identification | Type of operation | | 1.4 | (hand,pedestrian,standing,seated,order picker) | pedestrian | | 1.5 | Load capacity / rated load | a (kg) | 1500 | | 1.6 | Load centre distance | c(mm) | 600 | | 1.9 | Wheelbase | y(mm) | 1160 | | Weights | 2.1 | Weight (including battery) kg | 436 | 516 | 570 | | Types (solid rubber superelastic,nylon polyurethane) | | 3 1 | Nylon/PU | | 3 2 | Type size front | mm | 180x50 | | Wheels, Chassis | 3.3 | Type size, rear | mm | 74x70 | | | Send Enquiry |
Electric Stacker | These comes in electric drives and hence the name given. We offer two different models namely: CLE1216 and CLE1229. Its technical specifications have been tabulated as:
| Identification | 1.2 | Manufacturer's type designation | CLE1216 | CLE1229 | | 1.3 | Drive:electric(battery or mains), diesel. petrol, fuel gas, manual | electric | | 1.4 | Type of operation hand . pedestrian, standing, seated, order-picker | pedestrian | | 1.5 | Load Capacity / rated load | Q(kg) | 1200 | | 1.6 | Load centre distance | c(mm) | 600 | | 1.8 | Load distance .centre of drive axle to fork | x(mm) | 795 | | 1.9 | Wheelbase | y(mm) | 1278 | | 2.1 | Service weight | kg | 660 | 750 | | 2.2 | Axle loading laden front/rear | kg | 840/1020 | 880/1070 | | Weights | 2.3 | Axle loading,unladen front/rear | kg | 300/360 | 340/410 | | | Send Enquiry |
Manual Stacker | These are provided with manual drives and come in the name SFH series. Apart from the well designed body some of the typical features are as follows: - Heavy duty design with quality mast construction.
- Drop forged forks.
- Straddle leg design suitable for two faces or low pallet.
- Light and easy manual steering system
Model SFH Series
| Model | | SFH1025-A | SFH1030-A | | Capacity Q | Kg | 1000 | 1000 | | Load center c | mm | 600 | 600 | | Lifting height h, | mm | 75-2500 | 75-3000 | | Fork length f | mm | 915 | 915 | | Minimum turning radius wa | mm | 1650 | 1650 | | Outer width of legs | mm | 1080-1360 | 1080-1360 | | Inner width of legs | mm | 960-1240 | 960-1240 | | Outer width of forks | mm | 210-800 | 210-800 | | Inner width of forks | mm | 10/01/00 | 10/01/00 | | Lifting speed with load | mm/sec | =16 | =16 | | Lowering speed | mm/sec | Adjustable | Adjustable | | Overall length l, | mm | 1480 | 1480 | | Overall width b. | mm | 1080-1360 | 1080-1360 | | Overall height h, | mm | 1770 | 2020 | | Outer dia. Of the front wheel | mm | 80 | 80 | | Outer dia Of the rear wheel | mm | 150 | 150 | | Net weight | Kg | 360 | 385 | | | Send Enquiry |
Collapsible Type Pallet Boxes | Ideally suited for closed-loop-logistics. Substancial savings can be realized during empty return trips from customer's end. Totally customizable to suite your specific requirement. Can be stored on the pallet racks by providing Runners at the bottom. Stackable option is also possible for achieving floor area savings. Castor wheel can be provided for internal movement in shop floor. - Front drop gate for easy access
- Load bearing : 1000 kgs
- Surface finish : powder coated for rust free service life.
| | Send Enquiry |
Foldable Pallet | Ideally suited for closed-loop-logistics. Substancial savings can be realized during empty return trips from customer's end. Totally customizable to suite your specific requirement. Can be stored on the pallet racks by providing Runners at the bottom. Stackable option is also possible for achieving floor area savings. Castor wheel can be provided for internal movement in shop floor. - Front drop gate for easy access
- Load bearing : 1000 kgs
- Surface finish : powder coated for rust free service life.
| | Send Enquiry |
Scissor Lift Table | These are used in almost all applications of manufacturing and warehousing. These are very well made with special safety features.
Some of the salient features are: - Electric toe guard to protect pinch points during lowering of the table
- Velocity fuse to stop falling due to loss of hydraulic pressure
- Upper travel limit switch to stop table at maximum height reducing motor wear
- 2.2 KW, 220/380 V, 3-phase, 50 Hz totally enclosed motor standard
| | Send Enquiry |
|
Our Products
|
© Cutting Edge Engineering Services Private Limited. All Rights Reserved (Terms of Use)