 | | Products We are the renowned export house engaged in exporting of a wide assortment of steel fabrication & abrasive products and various types of material handling equipment. Our entire product range is developed from proven grade raw materials and under the surveillance of industry professionals. Hence, these meet all standard industry specifications and assist us in successfully meeting various needs of our international clients. High durability, effective performance, long service life and cost efficiency are the features of our products. Presently, we are engaged in exporting of: |
Aluminium Oxide We are the leading manufacturers of aluminum oxide, which is an amphoteric oxide of aluminum. It is made by bayers process from bauxite. Aluminum oxide is very hard and therefore, used as abrasive in various areas. Some other area of application of our products include :
• Because of high melting point, they are used as refractory material
• Used in ceramic, polishing applications
• In lighting and photography
• In medical industry for hip replacement.
| |
|
Cut Wire Shots Cut wire shot is manufactured to comply with all the requirements described in SAE J441. Cut wire shot is available as cut edges rounded by conditioning, or fully conditioned to spheroids. Carbon steel cut wire shot is manufactured in the following hardness averages : 36 to 48 HRC, 50 to 55 HRC. Sizes from 0.4mm to 2mm dia.
| |
|
Ferro Alloys - High Carbon Ferro Manganese.
- High Carbon Ferro Silicon.
- High Carbon Ferro Silico Manganese.
| |
|
Garnet Abrasives The garnet abrasives we offer to clients are used in sandblasting applications. These have got superior hardness and high bulk density that makes them perfect for many surface preparation applications. Some other features of abrasives include :
• They are harder, heavier and more durable than other blast abrasives, which makes them cost effective
• The blast cleaning with our abrasives lowers the dust emissions because of their toughness and rapid settling feature.
| |
|
Metal Spray Gun Flame type Metal Spray Gun sprays pure or alloyed metal such as Zinc, Al, Steel, Brass, in wire form by using Oxygen-Acetylene/L.P.G. gases flame and atomized by a blast of compressed Air. Spraying of metal to prevent corrosion against water, atmospheric & chemicals.
| |
|
Stainless Steel Shots Stainless Steel Shots are used in cleaning pressure die cast components specially in Zinc, Aluminium die casting. It gives shinning as compare to MS Shots.
| |
|
Steel Grits Our assortment of cast steel angular grits is developed by crushing special heated shot pellets. After crushing the pellets are tempered to a desired hardness. Their functional services characteristic deplaned upon hardness selection. Our range of grits work best in tum blast applications.
Some of their technical details are:
| | | Steel Shot | Steel Grit | Steel Grit | Steel Grit | | | | S | GP | GL | GH | | | C | 0.85 - 1.20 | 0.85 - 1.20 | 0.85 - 1.20 | 0.85 - 1.20 | | Chemical | Mn | 0.60 – 1.20 | 0.60 – 1.20 | 0.60 – 1.20 | 0.60 – 1.20 | | Composition | Si | 0.50 - 1.20 | 0.50 - 1.20 | 0.50 - 1.20 | 0.50 - 1.20 | | % | S | <0.05 | <0.05 | <0.05 | <0.05 | | P | <0.05 | <0.05 | <0.05 | <0.05 | | Hardness | | 40-50 HRC | 46-50 HRC | 56-60 HRC | 63-65 HRC | | Micro Structure | Homogeneous tempered Martensite & Baintite | | | | | | External Firm | | Round or similar round | | Spheroid, Semi-spheroid | | | | | Rate of deformity <10% | | Flat granules < 10% | | | Density | | >7.2g/cm3 | | >7.4g/cm3 | |
| |
|
Steel Shots Steel Shot is a spherical product of hyper-eutectic steel which has been fully heat-treated. It has a uniform structure of finely tempered martensite to provide optimum resilience and resistance to fatigue.
This is the most important abrasive for the majority of wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
| |
|
Zinc Wire We are the leading manufacturers of superior quality zinc wire, which are made by using high grade metals such as lead, tin, iron, copper etc. The wires are tested for their heat and rust resistance, thickness, length, strength and certain other features before sending it to the client. We also wrap each oil in polythene sheet/ gunny sheets in order to avoid scratching during their transit process.
| |
|
|
