Having the heat transfer area of 1000 m² and maximum pressure of 60 bar, heat exchanger is one of our most popular products. We offer shell and tube heat exchangers that are of fixed tube sheet floating heat and U tube type. These power efficient heat exchangers have the dimensions of 140 mm max, 20 meter max and 75 tons as their thickness, length and weight, respectively. Construction features of the product meets ASME specifications. Various construction features of the product includes the following:

• Primary material: Steel
• Stainless steel connection (Options NPT)
• Flange (optional feature)
• Connection size: 4 - 6" flange, 3/4" & 1/2" NPT vent
• Overall dimensions: 16" diameter x 24-144" length
• Number of tubes / plates / fans 2.00 to 6.00

Send Online Query

Used in various industries such as defense and various others, condensors are completely assembled in our factory. These are piped & wired to accept a single point electrical connection. Some other features of the product includes:

• Entire unit specifically designed for outdoor application with vertical discharge condenser
• Weatherproof cabinet is constructed of G90 galvanized steel and coated with gray polyurethane paint which passes 2000 hour salt spray test
• Double wall construction throughout with 2" insulation
• Access doors are provided at all areas subject to scheduled maintenance.
• Construction includes stainless steel hinges, perimeter gaskets and zinc cast lockable handles that operate from outside or inside.
• Unit specific color-coded wiring diagrams provided in point to point and ladder form and permanently laminated in the control compartment.
• Scroll or Screw compressors are mounted on decks and rubber isolation mounted for quiet efficient operation.
• Refrigerant piping stubbed to outside to reduce start-up time

We can easily customize the product, as per the specific demands of our esteemed clients. Some of the optional features of condensors are:

• Door view window
• Marine service lights
• Tan paint

Send Online Query

Efficiently designed, evaporators offered by us have the operating temperature of up to 232 ^oC and an evaporation rate of 6 GPH. Having the tank capacity of 70 gallons, these corrosion resistant evaporators have heat energy of 81883 BTU/hr. We offer the product in the equipment size of 55x30x72 inches and have the ability to customize it as per the specifications of our clients. Our designers specially design these evaporators by considering entire heat, mass & balance of factory so that the product can be effortlessly integrated in the plant, ensuring thermodynamic harmony.

Send Online Query

With weight of 75 tons per piece & size up to 4500 mm diameter these distllation columns are among our most acknowledged products. Specifications of the product includes:

• Thickness: 40 mm max including cladding
• Length: 30 mm

We use all types of stainless steel to manufacture the product, which finds usage in various segments which includes chemical, water treatment plants and distillery.

Send Online Query

Offered with the volumetric capacity of up to 200m³ and size of 4500 mm diameter, pressure vessels are used in various industries. These vessels are specially designed to contain liquids/ gases at a specific temperature different from its surrounding temperature. Industrial as well as private sectors employ these vessels. These are available in weight of 40 m tons max and thickness of 45 mm max in single piece.

Send Online Query

We offer reactors having the volumetric capacity and size of 4500 mm diameter. Known for its temperature resistance and corrosion resistance, the reactors have maximum thickness of 40 mm, maximum length of 20 meter per piece and maximum weight of 40 M tons. These low on maintenance reactors have following jacket types:

• Conventional
• Limpet
• Embossed
• Dimpled

Send Online Query

We offer UNI tanks having the volume capacity of 3000 gallons and pressure ratings of 0.0 psi. This corrosion resistant and chemical resistant product is available in diameter of 90 inch and height of 122 inch. We use plastic and polyethylene (PE) to fabricate the product. Crosslink and linear PE are also available with us. Its application areas includes:

• Chemical
• Pharmaceutical
• Food and beverages
• Fuel/ Water processing

UNI tank is placed above the ground and outdoors. It has following optional features:

• Cooler / Insulated

Send Online Query

Leveraging on our vast industrial experience, we offer unmatched quality spheres in the diameter of 4.5 to 5 meter. These products are manufactured from quality steel and other materials to ensure the properties of corrosion resistance and durability. Known for its leak proof feature, spheres can be customized as per the definite demands of our clients.

Send Online Query

We use qualitative materials such as stainless steel (chamber material) to fabricate durable and quality tested vacuum chambers. These products are used in various industries and can be customized according to the specifications of our clients. Some of the optional/customizable features of our qualitative vaccum chamber, with tempered glass viewing window and degassing box, are as follows:

• Chamber / component type custom or special
• Glove box or weld chamber
• Base or service well
• Base plate
• Feed-through collar
• Load lock
• Surface analysis or universal
• Shape - rectangular
• Size, shape can be customized
• Elevated or Positive Pressures (> 760 torr)
• Heaters to bakeout surface absorbed gases or remove condensation
• Internal Lighting
• Liner or shutter to prevent wall deposition
• Load lock or sample transfer air lock
• Mirror Polished or Electro-polished Surfaces
• Viewports, Feedthroughs or Other Ports
• Heat or Magnetic Shield

Send Online Query

Our storage tanks have the volumetric capacity of up to 200 m³ and size of 4500 mm diameter. Used for storing different types of liquids and gases, durable storage tanks have thickness of 45 mm max in single piece and a weight of 40 m tons max. These tanks are used as both reservoirs as well as for manufactured containers. Safe and secure handling makes it highly demanded in the market.

Send Online Query

Available in 0.5 micron filter, 6 ft diameter drum and 99 HP, equipments for distillation plants are offered in industry specific and client specific configurations. Demanded by all our clients, these durable and high performance equipments are used in following industries/ application areas:

• Adhesives processing
• Chemical processing
• Construction material processing
• Cosmetics processing
• Food or beverage processing
• Paint / coating processing
• Paper and pulp processing
• Sanitary / pharmaceutical
• Drinking water
• Waste / sludge

Send Online Query

Depending on the specific requirements of our esteemed clients, we offer an assortment of for pharmaceutical plant equipment, chemical and health care industry. All these equipments are manufactured by using quality checked raw materials, in our manufacturing facilities. We also provide onsite support to our clients, to ease their installation and other related tasks. We have the ability to undertake and fulfill bulk orders for these equipments within the pre-defined time frame.

Send Online Query