EDM Drill Machine is suitable to making micro holes from dia 0.3 to 10.0mm in all metals. The maximum depth of hole is 300mm. There are two standard models available. Special size machines can be manufactured.

The EDM Drill Machine is suitable for drilling Start Holes For Wire Cut EDM, Gas Escape Holes, Drilling In Super Alloys and Tungsten Carbide Dies, Can Work On Spherical, , Ejector Pins, Cooling Pins Of Pen Moulds, Air Vent Holes For Forging Die. The drilling can be done on Curved And Tapered Work Pieces also.  

Machine Tool		Speed I	Speed II
Work Table	mm	400 x 300 (Stainless Steel)	550 x 350 (Stainless Steel)
X Travel	mm	200	350
Y Travel	mm	150	250
Z Travel	mm	300	300
Guide Travel Z2	mm	150	150
Electrode Pipe Dia	mm	0.3 ~ 10.0	0.3 ~ 10.0
Max. Job Height	mm	310	310
Max. Drilling Depth	mm	300	300
Dielectric Fluid		(Tap/Distilled)
Pulse Generator	Amps	25	35

Metal Arc Disintegrators designed for removing broken taps, drills, studs, work-hardened metal, or any hard conductive material, in hard-to reach locations. With its remote control module, it can operate effectively at up to 15 meters from its power supply.

Description		Model SK III	Model DMS III	Model DMS X	Model DMS XX
Power Rating	KVA	3 KVA	3 KVA	10	20
Electrode Movement	mm	150	200	200	250
Work Table	mm	700 x 600	1050 x 750	1050 x 750	1050 x 750
Max. Dist. Bet Base Plate & Electrode Holder	mm	320	750	750	750
Motorised Vertical Travel of Cross Arm	mm		600	600	600
Horizontal Travel of Electrode on Cross Arm	mm		350	350	350
Max. Job Height from Floor	mm	1050	1750	1750	1750
Swiveling Movements
Servo Slide	Deg		35	35	35
Cross Arm	Deg	360	360	360	360
Vertical Column	Deg	360	360	360	360
Coolant		Tap Water	Tap Water	Tap Water	Tap Water

We are a leading manufacturer & exporter of Spark Erosion Machines in India since 1982.

Our Electric discharge machines find wide applications in different industries like manufacturers of Plastic moulds, Bakelite moulds, Tungsten carbide die, Forging dies, Rubber moulds, Extrusion dies, Blanking dies, Coining / Embossing dies, Piercing dies, Production machines for specific application for Machining of big / hard casting, Computer panel moulds & Molded luggage moulds and wide range of applications

 

Machine Tool	Unit	S 50 ZNC	S 65/50 ZNC
Work Tank	mm	900 X 550 X 375	1150 x 660 x 450
Work Table	mm	600 X 400	700 x 420
X Travel	mm	350	450
Y Travel	mm	225	350
Z Travel	mm	250	200+200
Die Electric Tank	Liters	300	500
Pulse Generator	Amps	50	50

 

We are a leading manufacturer & exporter of Spark Erosion Machines in India since 1982.

Our Electric discharge machines find wide applications in different industries like manufacturers of Plastic moulds, Bakelite moulds, Tungsten carbide die, Forging dies, Rubber moulds, Extrusion dies, Blanking dies, Coining / Embossing dies, Piercing dies, Production machines for specific application for Machining of big / hard casting, Computer panel moulds & Molded luggage moulds and wide range of applications.

Special features of the spark erosion machines are :

• Three Part Design
• Fixed Work Table with X, Y, Z Movement for Electrode
• Box Guides & Ball Screw For X/ Y Axis
• Motorized With Variable Speed Drive For X/Y Positioning
• Drop Down Door For Work Tank
• Hardened & Ground Rhomboid Quill
• Heavy Job Weight Capacity
• MOSFET Controller

Machine Tool	Unit	F  25	F 50	F 65
Work Tank	mm	850 x 550 x 400	1200 X 600 X 450	1500 X 800 X 500
Work Table	mm	600 x 400	800 X 500	1000 x 600
X Travel	mm	300	400	500
Y Travel	mm	200	300	400
Z Travel	mm	200	250	250
Max Electrode Wt	Kgs	35	50	50
Max Job Wt	Kgs	650	2000	3500
Max Job HT	mm	350	400	400
Die Electric Tank	Liters	350	650	950
Pulse Generator	Amps	25	50	65

Our Calibration Services :-

• Linear Measurement Checking Services (with slant bed axis calibration)
• Ballbar Accuracy Checking Services

Instruments We have :

• Renishaw ML 10 gold standard
• Renishaw EC10 environmental control Unit
• All acessories for Linear Measurement Ballbar Accuracy Checking
• Latest Renishaw software for solving accuracy related problems
• Latest Renishaw QC10 Balbar System with renishaw software

Uses of Calibration :

• Regular calibration with Renishaw laser and barbar systems result in :
  • Reduced maintenance
  • Reduced downtime
  • Reduced stoppage time
• Advantage Sparkonix
   
  Having a good technical expertise of more than 1500 machines all over India with more or less all major companies. Our range of calibrations of CNC machines includes CNC, VMC's, CNC lathes, and CNC SPMs, CNC Grinders and wide range of CNC machines form small machines to machines having length of 32 meters also. Expertise with almost all CNC system.
  

We are a leading manufacturer & exporter of Spark Erosion Machines / Electric Discharge Machines / EDMs in India since 1982. Our Electric discharge machines find wide applications in different industries like manufacturers of Plastic moulds, Bakelite moulds, Tungsten carbide die, Forging dies, Rubber moulds, Extrusion dies, Blanking dies, Coining / Embossing dies, Piercing dies, Production machines for specific application for Machining of big / hard casting, Computer panel moulds & Molded luggage moulds and wide range of applications.

Special features of the machines are;

•    Two Part Design
•    Hardened & Ground Rhomboid Quill
•    Ball Screw for X & Y Axis
•    Heavy Job Weight Capacity
•    MOSFET Controller

Standard Models available. Special size machines can be manufactured.

Machine Tool	Unit	S 35
Work Tank	mm	800 X 500 X 325
Work Table	mm	550 x 350
X Travel	mm	300
Y Travel	mm	200
Z Travel	mm	200
Pulse Generator	Amps	35

We are a leading manufacturer & exporter of Spark Erosion Machines / Electric Discharge Machines / EDMs in India since 1982.

Our Electric discharge machines find wide applications in different industries like manufacturers of Plastic moulds, Bakelite moulds, Tungsten carbide die, Forging dies, Rubber moulds, Extrusion dies, Blanking dies, Coining / Embossing dies, Piercing dies, Production machines for specific application for Machining of big / hard casting, Computer panel moulds & Molded luggage moulds and wide range of applications.

Special features of the machines are :

 

• Two Part Design
• Hardened & Ground Rhomboid Quill
• Ball Screw for X & Y Axis
• Heavy Job Weight Capacity
• MOSFET Controller

Standard Models available. Special size machines can be manufactured.

Machine Tool	Unit	S 25
Work Tank	mm	600 X 400 X 275
Work Table	mm	400 x 300
X Travel	mm	200
Y Travel	mm	150
Z Travel	mm	200
Pulse Generator	Amps	25

 

 

 

 

 

 

Renishaw Ballbar Instrument with Latest QC-10 Software.

Why Should We Do Ballbar Accuracy Checking
 

• Verify Machine Performance.
• Cross-check The Machine Tolerance.
• Conditioning Monitoring.
• Predictive Maintenance.
• Less Setting Time For The Instrument.
• Reduced Downtime.
• Test Completes With In Minutes With Full Test Report.
• Corrective Action Can Be Planned Immediately.

Advantage Sparkonix
 
Having a good technical expertise of more than 1500 machines all over India with more or less all major companies. Our range of calibrations of CNC machines includes CNC, VMC's, CNC lathes, and CNC SPMs, CNC Grinders and wide range of CNC machines form small machines to machines having length of 32 meters also. Expertise with almost all CNC system.

The company is into the manufacturing of world class Mosfet controllers which have got an extensive usage in the industry. We offer to our clients these products in single and isolated base modules which is offered to clients at competitive prices.

Range :- 25, 35, 50, 65, 100 Amps

Features :-

• Mosfet controller
• Motor - feed, sensitivity & speed setting variable as per job requirement
• Anti-arc buzzer
• Constant, suction & impulse flushing
• Adjustable dielectric flow
• Float switch for dielectric level auto stop
• Reverse polarity change over available
• Safety interlocks present

Range :- 50, 100 Amps

Features ZNC :-

• Industrial Pc Base 15” Colour Monitor
• Dialog Operation Menu
• In Built 3 Axis Dro
• 100 Machining Programme In Memory File
• 10 Steps Machining Condition For Auto Processing
• Auto Data Back Up After Power Interruption
• Special Anti-arc Circuit
• Auto Center Calculation

We  are a leading manufacturer & exporter of Spark Erosion Machines / Electric Discharge Machines / EDMs in India since 1982.

Our Electric discharge machines find wide applications in different industries like manufacturers of Plastic moulds, Bakelite moulds, Tungsten carbide die, Forging dies, Rubber moulds, Extrusion dies, Blanking dies, Coining / Embossing dies, Piercing dies, Production machines for specific application for Machining of big / hard casting, Computer panel moulds & Molded luggage moulds and wide range of applications.

 

Special features of the machines are;

• Two Part Design
• Hardened & Ground Rhomboid Quill
• Ball Screw for X & Y Axis
• Heavy Job Weight Capacity
• MOSFET Controller

 

Standard Models available. Special size machines can be manufactured.

 

Specifications of S Series Manual Machines
Machine Tool	Unit	S 50	S 65
Work Tank	mm	900 X 550 X 375	1150 x 660 x 450
Work Table	mm	600 X 400	700 x 420
X Travel	mm	350	450
Y Travel	mm	225	350
Z Travel	mm	250	200+200
Pulse Generator	Amps	50	65

 

We are a leading manufacturer & exporter of Spark Erosion Machines in India since 1982.

Our Electric discharge machines find wide applications in different industries like manufacturers of Plastic moulds, Bakelite moulds, Tungsten carbide die, Forging dies, Rubber moulds, Extrusion dies, Blanking dies, Coining / Embossing dies, Piercing dies, Production machines for specific application for Machining of big / hard casting, Computer panel moulds & Molded luggage moulds and wide range of applications

 

Machine Tool	Unit	F 50 ZNC	F 65/50 ZNC
Work Tank	mm	1200 X 600 X 450	1500 X 800 X 500
Work Table	mm	800 X 500	1000 X 600
X Travel	mm	400	500
Y Travel	mm	300	400
Z Travel	mm	250	250
Die Electric Tank	Liters	650	950
Pulse Generator	Amps	50	50