Spectra Consultech

Offering an special equipments for production of metallic bonded powder coatings and special electrostatic equipment to obtain smooth metallic finish on aluminium, glass, plastics, mdfwood.

We supply ACM grinding plant with online sieving facility to pulverize Powder coating material.It gives excellent quality and fineness of powder with saving in manpower,power,and enhance output efficiency compared to low cost,low technology technology machines

Offering a quality fine grinding(pulverizing) machine with following functions: -It could crush and select the hard, fragile, pliable but tough, light and loosen materials. Therefore, it is widely used in powder coating, medicine, dyeing, food production, chemical refinery and ceramics refinery and so on.* Main characteristics: - Reliable high production rate - Adjustable particle size distribution - High capacity

Product Code:	MF
Payment Terms:	L/C (Letter of Credit), T/T (Bank Transfer)
Port of Dispatch:	Yantai/Quindao
Production Capacity:	50-1000 Kg/hr
Delivery Time:	60 days

Offering a wide range of auto container mixers with following functions: - This machine is mainly used on electro static power production linets which feature large scale production and high automation. It can raise production efficiency and relieve intensity of work. - Characteristics: Mobile hopper, excessive hopper continuous loop production. - Auto-complete: Hopper location, setup, lock, overturn, mixing, and replacement

We supply jfy series caterpillar slatted cooling belt cum flaker for powder coating production. The length of the belt permit thorough cooling of the molten plastic band about 1-1. 5mm thick which is then easily broken down by flaking unit into small chips suitable for feeding to acm fine grinding ,along the passage it is cooled by cooling air by fan coil or condenser,easy clean,and less maintenance,belt speed adjustable by frequency inverter,all contact parts are made of stainless steel

We supply JFY series ss slatted caterpillar type cooling belt and PFY series with synthetic resin(PU,PVC etc)belt material with toothed flaking unit.The belt canopy is equipped with fan coil unit which deliver cooling air to the hot plastic band squeezed from the chilled rolls and conveyed towards the flaker to be broken down into small chips.The speed of the belt is controlled by frequency inverter,is also equipped with emergency stop and reverse button.
All contact parts are made of stainless steel

Offering a wide range of chill roll cooling bands. Main characteristics: - The cooling band adopts suspended inner-cooling system to have the water recycle in the inner-wall of the tube. - The material will not stick on the band. Only common water is needed to cool the machine despite the high temperature in summer. - The band and crushing wheel have overload protection, high capacity, and less area, easy to clean and operation.

Offering high speed mixter with following
functions: Proposed equipment having multi-functions including quick crushing, mixing, and slow mixing of the powder and massive materials.* Main characteristics: - Adjustable mixing time
- Sufficient mixing
- High capacity
- High efficient crushing
- Easy to clean
- Perfect sealing
- Easy to operate and maintain.

We supply production scale High speed mixer to produce powder coatings.It has efficient design to mix the raw material in short time giving desired premix quality for extrusion

Offering  lab twin screw extruder with following features: Main characteristics: - Satisfy the requirement of production line technical data. - Check the results of powder formulation accurately. - Three-section double-direction PID auto-control, Accuracy is good. - Has extruder-cooling band function.

 Offer laboratory scale air classifying fine grinding mill.

Product Code:	MF-1
Payment Terms:	L/C (Letter of Credit), T/T (Bank Transfer)
Port of Dispatch:	Yantai/Quindao
Production Capacity:	5-15 kg/hr
Delivery Time:	30 days
Packaging Details:	std. packing

We supply complete Powder coating Production lines capacity range from 50 Kg/hr ,100 kg/hr,200 Kg/hr,300 Kg/hr,300-400 Kg/hr,500 Kg/hr,800 Kg/hr,1000 Kg/hr
which include High speed mixer,Container mixer,Twin screw extruder,Cooling band flaker,ACM fine grinding system

Offering mini lab twin screw extruder for Powder coatings with following features: Main characteristics: - Satisfy the requirement of production line technical data. - Check the results of powder formulation accurately. - Three-section double-direction PID auto-control, Accuracy is good. - Has extruder-cooling band function.

Product Code:	SFJ-AT
Payment Terms:	L/C (Letter of Credit), T/T (Bank Transfer)
Port of Dispatch:	Yantai/Quindao
Production Capacity:	1-5 kgs/hr
Delivery Time:	30 days

Offering powder coating machine: Powder coating production consists: - Weighing of raw materials: According to the formula and quantity for the specific production. - Mixing: Mixing of raw materials is carried out in a special mixer, which will take in account the different densities of raw materials. - Extrusion: Mixed Raw materials under goes a hot melt compounding process where it becomes a hot, homogeneous paste. - Cooling and Kibbbling: The hot paste is Passed through a cold rolls where it becomes a brittle film and through the kibbler this film is a crushed into 3-5 cm chip.

Powder coating production line with overhead material feeding

We supply complete powder production line which includes high speed mixer,twin screw extruder,cooling band flaker,acm grinding system. Our machine are proven in design,workmanship and provide customer value for money. It improves efficiency,productivity and cuts manpower,etc. As compared to existing low technology machines

Powder coating production machinery-sandvik  steel cooling belt.

sandvik or berndorf brand one piece stainless steel conveyor belt,equipped with water spraying system from bottom end to guarantee excellent cooling result.

Powder coating production machinery-twinscrew extruder and chill roll cooling.

 l j twinscrew extruder and jfy-series cooling belt -powdercoating production line machinery installation comprising twinscrew extruder and chill roll cooling belt flaker.

Powdercoating production line machinery installation comprising ACM Micron grinding system with heat exchanger ,online rotary sieving machine installation,gives advantage of less manpower,smooth production with no contamination

SLJ-30/32 Twin screw extruder -Main features:Excellent mixing effect,high efficiency,Accurate and real colour matching to match final production,Reliable simulation of operation parameters,Excellent self cleaning effect,convinient maintenance and cleaning,safe and reliable operation

We supply production and lab scale powder coating twinscrew extruder,which is an efficient machine in terms of power and output capacity and usage of raw materials

Offering a wide range of twin screw extruder for Powder coating production with the following characteristics 1. The unique assembling of screws made the materials have the processing of high speed mixing, intensive compressing and expanding, intensive pressure rubbing, high-speed cutting and mixing, and the compressive ratio of high damp reciprocation. 2. Because the element of damp reciprocate, so the function of the mixing improved to another step from the base of gap-free, therefore, the mixing function becomes more perfect, and the gloss degree could be improved to 5-7 degree. 3. It has the program of awareness and alarm of overload and overtime, in order to avoid damage caused by overload of reduce speed box. 4. The speed of screw running and the speed of feeding both have the sign of tracks and feedback, in order to prove the equipment could work under a normal load. 5. The assembling style of the screws has the unique material moving element, we use the good material and heating treat method during the process of fusion. 6. The reduction speed gear box has control pressure, control temperature feedback equipment, it also has the function of awareness alarm.

Product Code:	SFJ
Payment Terms:	L/C (Letter of Credit), T/T (Bank Transfer)
Port of Dispatch:	yantai/quindao
Production Capacity:	50-1000 kgshr
Delivery Time:	60 days

Powdercoating production machinery-complete acm grinding system installation.

acm micron grinding system -temp. Controlled grinding,constant output,tight particle size distribution,easyclean,particle size control through fully adjustable rotor speed,classifier speed,airflow rate and feed rate