Metallurgical Test Equipments

·        Directdepth indication on the dial gauge.

·        Resolutionof 0.1mm.

·        Capacity:2mm. thick sheet of ferrous & 2.8 mm. thick sheet of non-ferrous material.

METALLURGY PLUS

This software can be used in SteelPlants, Metal Forging Industry, Oil & Gas Industry, Material Science,Mineralogy - Metal and Metal Strength Analysis Cement (Klincker) qualitycontrol and where ever metallurgical microscopes are used. This Package is veryuseful for educational institutions and all material science technocrats andmetallurgists.

Measurement Tools

* Calibration * Length * Angle *Perimeter * Width * Radius * Area * Color * Counting

Metallography Tools

Grain Size - ASTM E 112
Phase - ASTM E 566 1245
Decarbization - ASTM E 1077
Coating Thickness - ASTM B 487
Nodularity - ASTM A 247
Porosity - ASTM 276
Inclusion - ASTM E 454 – E 1245
Inclusion DIN - Standards (50602)

·        Special Furnace with DTC, Thyristor controlled panelavoids temp. overshooting.

·        At a time three Jominy tests can be carried out.

·        Quick transfer of specimen to quenching fixture withinspecific time with the special tong.

·        Quenching Fixture designed strictly as per BS / SAE withspecifications like 45 degree angle of top plate, quenching distance, jetstopper release just before quenching etc.

·        Motorised Water Circulation with storage & test tank.

This shop microscope is compact in design and comeswith a wide field 10x eyepiece. It is ideal for viewing print, textiles orother industrial applications. Three models are available in 20x, 50x and 100xformats supplied with either 2x, 5x, or 10x objectives (160mm tube length).Optional measuring reticules are available and come into sharp focus. Focusingis achieved with the coarse adjustment knob on the side of the barrel.Illumination is via a penlight with holder on a swivel mount, requires two AAAbatteries not included. The microscope is cast aluminum frame with beige enamelfinish. It is 9" high (230mm) and weighs 1.43 Lbs. (0.65kg). Included is amanufactures five year warranty and free one year extended warranty on themicroscope only. The penlight comes with a one year warranty. Included is arugged carry and storage case that makes it easy to take anywhere on the job.

IN SITU METALLOGRAPHIC KIT (PORTABLE POLISHER)

 

·        Variable speed, High torque.

 

·        Flexible shaft.

 

·        90 degree handle.

 

·        38 mm disc for PSA paper & cloths.

 

·        Supply 230 V. AC.

 

IN SITU METALLOGRAPHIC KIT (PORTABLE AUTO ELECTRO POLISHER)

 

·        Automatic digital electro polisher, Auto/manual modes,With timers, Electrolyte flow regulation.

 

·        Current- 2.5 Amp, Voltage - 80 V., Supply - 230 V.A.C.

 

·        Polishing probes -Unique Pen Type system withrecirculation of electrolyte, pump 25watts reservoir (0.5 Ltr.), Pre-grindingrequired is much less.

 

IN SITU METALLOGRAPHIC KIT (REPLICA KIT)

 

·        Reflective replica - Composit of replica film, greenfilter, reflector and gumming tape for excellent contrast. Or Transparentreplica - Film thickness - 125 microns, 30 microns.

 

·        Replica liquid.

 

·        Glass slides.

Spectrometer Cutting Machine (Diamond Sectioning Machine)

 

·        Effective solution for cutting fragile/extreme hard/ softmaterials with minimal surface deformation.

 

·        Precision job positioning by micrometer.

 

·        Diamond blade - 0.15, 0.30, 0.40 mm. (High/low concentrationdiamond).

 

·        Various holders for different material & shapes’sectioning.

 

·        Attachment for PCB (PTH) sectioning. High Torque Motor -180 watts.

 

·        Speed Variation - Step less up to 500 rpm.

 

 

Spectrometer Cutting Machine (Spectro Cut)

 

·        Table top version producing burn free cut.

 

·        Machine for small laboratories or low work volumes.

 

·        Motor mounted on the wheel shaft that rotates for choptype sectioning.

 

·        Cutting Cap. 35 mm dia. Hardened piece / 50 mm dia solidstock (soft).

 

·        Motor - 3 h.p.

 

·        Abrasive wheel - 250 mm dia.

 

·        Coolant tank cap.- 30 ltrs.

The SLE Rare Gas Purifier is a stand-alone unit forthe Purification of Argon or any of the other rare gases: helium, neon, xenonand krypton. It offers a compact system for delivery of purified gas directlyto the point of use.

It removes oxygen and moisture from the Inert Gas bypassing it through the heated chamber containing Magnesium metal which ismaintained at a temperature of 430 degree centigrade, the air is than passedthrough a drying chamber containing silica Gel/ molecular sieves, for completeremoval of moisture from the Gas.

In the new improved design the heating chamber hasbeen separated from the main body to maximize heat dissipation and the span ofreactive getter tube has been increased, to enhance the quality of Process.

We reserve the right to change the Design and orSpecification without notice.

Features

·        Failsafe Design- Offering long term optimum performance and reliability.

·        Automaticthermocouple temperature control system.

·        Bandheater facility incorporated allowing in-situ regeneration of the molecularsieve drier tube.

·        Nohigh cost thermal fuse, simplifying operation and reducing long-term cost.

·        Stainlesssteel tubes.

·        Comparedto competitive alternatives long term economy due to low cost of replacementpurifier tube.

·        Lengthx Width x Height : 18” x 10” x 25”

The Rare Gas Purifier-2000 is a stand-alone unit for the purification of argon or any of the other rare gases: helium, neon, xenon & krypton. It offers a compact system for delivery purified gas directly to the point of use. The purifier contains two reactive getter tubes and a molecular sieve drier tube housed in a cabinet for immediate use. Just plug into the local AC power supply, turn on the power and you are up and running.

Specifications

·         Excellent Optics with 10x, 20x, 50x Objective.

·         Magnetic holder 10x Eyepiece.

·         This instrument is applicable in laboratory & also in situ application.

·         It is equipped with micro-camera which is directly connected with metallography microscope, and camera can take photograph on site.

Abrasive Cut Off Machine (SLE - ABR02)

 

 

 

Abrasive cut off machines that allow a cool, burn free sample production and ensure an absolute minimal deformation. These machines possess a robust construction and rigid clamping thus minimizing wheel breakage.

 

 

 

Technical Specifications:

 

·         5 HP/3 HP Motor Capacity for 12" and 8" Wheels

 

·         Manual X-Y feeds

 

·         Screw Operated Vice

 

·         Enclosed Cutting Compartment

 

·         Built in Coolant Tank and Pump with Re-circulation

 

·         Cutting capacity: 90mm round piece or 100 mm x 50 mm slab

 

·         Job Table Y feed, X feed total

 

 

Sample Mounting Press (SLE - MP001)

 

 

 

Permanent Mounting of metallographic specimen for correct polishing results Helps polishing small specimens & edge retention  Reliable hydraulic jack with pressure gauge  Mould heater fast cooling (air/water), time, buzzer facilities.

 

 

Technical Specifications:

·         Specimen Mounting Press: Manual/Hydraulic Operation 1", 1¼", 1½" & 2"

 

·         Mould Capacity 1000 Watts

 

·         Mould Heater Mould with Internal Cooling System

 

·         Digital Temperature/Timer Control and Display

Belt Grinder (SLE - BG01)

  For initial Rough Grinding Motor – 1HP, 220V, single phase Endless belt dim. – 100 x 915 mm dynamically well balanced rollers.

 

V/U Notch Broaching Machine (SLE – 10 SERIES)

 

 

 

·         Achieve better surface straightness

·         Fitness accuracy

·         Closer angular tolerance

·         Sharp corner in a single stroke

·         Highly Precision.

·         Tool guide for proper alignment.

·         Consistency in all specimens.

·         Simple clamping for all specimens.

·         Bottom system for easy operation.

·         Notch as per Indian/International standards.

Metalscan M2500 series
·         Low cost, high performance desktop spectrometer
·         Easy to install, robust construction, and easy to use
·         SPARCS Windows based software
·         From the world leader in CCD based metals analysis
Metalscan M2550 and M2550X
·         Spark excitation in argon
·         For non-ferrous applications or those not requiring carbon,phosphorous or sulphur
·         Single or multi-matrix
Metalscan M2560 and M2560X
·         Spark excitation in argon
·         For ferrous applications or those where carbon,phosphorous or sulphur is required
·         Single or multi matrix