Custom compounds based on sbc chemistry hardness range: 20- 95 shore a temperature range: -40 to 70 degree centigrade. Sperene tpr products come in a variety of grades having good equilibrium between physical and mechanical properties covering a wide shore a hardness.

Properties And Advantages:

• Easy Processing By Conventional Molding Machines
• Recyclable : Environment Friendly & Economic
• Short Cycle Times & Low Energy Consumption
• Excellent Adhesion To Various Substrates Like Polypropylene, Abs, Polycarbonate, Nylon
• Stichable Grades Are Available
• Excellent Weather Ability & Ozone Resistance (Sperene Tpe)

Sperene Tpe: Thermoplastic Elastomers

Highly engineered compounds based on sbc, sebs and sis chemistries. Hardness range: 5 95 shore a temperature range: -60 to 120 degree centigrade excellent weatherability & uv resistance.

Properties And Advantages:

• Tpe Products Based On Sebs With Excellent Weather Ability & Ozone Resistance.
• A Wide Hardness Range : 5 To 90 Shore A( Sperene Tpe)
• Physically Cross Linked : So No Need Of Cross Linking/Vulcanization Like Conventional Rubber

Based on polypropylene where the properties of base resin are modified for specific end use performances like low temperature flexibility, strength enhancement, mechanical properties and thermal properties enhancement.

Elastomer Modified Polypropylene Compounds

High Impact Strength Compounds based on PP and Elastomers like EPDM, SBC, HNBR.
Applications : Automotive, Packaging.

Reinforced Polypropylene Compounds

Mechanically reinforced pp compound for substitutes for costly engineering plastics.
Formulations based on talc (10-40%), caco3 (10- 20%) and glass fibre (10-30%) is available with various ancillary properties like flame retardant, anti static.

Advantages Of Sperene Tpo:

• Flame retardant, high impact, environment stress cracking resistant, high modulus
• Highly optimized in terms of processibility, performances and cost.
• Easy processing and design freedom.

Sperene Tpu: Thermoplastic Urethane Compound

High performance thermoplastic elastomer compounds hardness range: 50 shore a to 60 shore d.

Here we modify the chemistry of base resins (PA, PC, ABS, PS, PBT) by innovative additive packages and fillers in order to engineer the high performance compound. Product families:

PA 6 & PA 66 Compounds
Excellent impact energy absorption, self lubricating, low friction, Excellent chemical resistance, Wide use temperature, good thermal properties, specific formulations for flame retardant grades.

Polycarbonate Compounds
High performance compounds based on pc as base specific additives and glass reinforcing agents. Excellent impact properties combined with strength, good thermal properties, creep resistance, specific formulations in compliance with ul ratings, good electrical insulating properties.

PC/ABS Blends
High toughness even at cold temperature, dimensional stability, good indoor color stability and resistance, easy processing & design freedom, can be electroplated specific formulation for flame retarding in compliance with ul ratings.
These are widely used in automotive wheel cover, fan, shroud, mirror housings, computer housing, industrial parts, electrical connectors, mcb and cfl holder, fluid containers.

PBT Compounds
A wide range of PBT glass filler reinforced compounds without flame retarding feature offering high heat stability, excellent chemical resistance and low water absorption.

HIPS Compounds
High impact strength, low temperature flexibility, easy processing, injection molding, extrusion blow molding, design freedom, controlled breath ability.

FT SERIES is standard, economical and oldest series. In this series, we have adopted negative rear angle dual-toggle clamping system, fully computer controlled and dual proportional load. The main features of this series are its Simplicity, Precision, Durability and Low Cost.

FTN SERIES is the changed version of FT SERIES. It has faster speed, higher precision, more consistency and higher capability with lower running cost as compared with FT SERIES. The structural part of this series is also more stronger.

FTA SERIES specification is same as that of FT SERIES machines but they come with a Variable Displacement Pump. In comparison to normal series, it can save 30%-50% power. Equipped with close-loop proportional variable displacement pump, it performs close-loop out pressure and flow. Special Advantages of FTA Series are:
(a) Power Saving
(b) More Accuracy & Precision
(c) Consistency
(d) Reliability

FTB SERIES, specification is same as FT SERIES machines but they come with Frequency Conversion Control Technology. The machine controls the system pressure and flow in accordance with the needed working pressure and flow at various molding stages to match the motor output according to its loading. Lower consumption of energy, lower cost and environmental damage is realized as a result. The special feature of this machine is it’s very low noise.

FJ SERIES machines are larger capability special plastic Injection Molding Machines. It is specially suitable for applications requiring large injection volume and low clamping force. Its maximum shot volume is 80,000 cm ³. It is used for molding Polyolefin (PE, PP) class big-scale plastic of products required for project applications.

Some of adhesives that are manufactured by us are:

• Polychloroprene adhesive for leather
• Polyurethane adhesive for leather
• Super-light adhesive
• Natural latex
• Vinyl-based adhesive
• Transparent hot-metal adhesive
• Elastomeric solvent-based adhesive