Bottom Roller Our range of bottom rollers are precisely made in thread rolling machine that has opposite helix flutes for zero axial thrust. The rollers are made using alloy steel and precision engineering determine the quality of bottom rollers. The exact circularity of bottom rollers and top rollers prevents yam breakages and it can be duly interchanged. The rollers are completely hard chrome plated that helps to reduce the lapping. The rollers are available for draw frames, comber, ribbon lap and sliver lap machines.
| |
|
Drafting For Ring Frames We offer a wide range of three-roller double-apron draft systems which are used in short staple ring spinning machines. These are appropriate for spinning pure cotton, man-made fibres or blends of both types up to 60 mm fiber length. This improves the functionality and enhances the spinning results due to the finer load steps and smaller load tolerances. Some of the salient features of Ring Frames - PK2100 Series Drafting are:
- Enhanced technological flexibility
- Increased load steps
- Load indicator for all weighting elements
- Smaller load tolerances
- Individual load adjustment of the weighting elements
- Partial load at front element (6 daN)
- Top apron cradle concept with individual tensioning system
- Ergonomic handle
Our range of Ring Frames - PK2100 Series are available in different types such as:
- PK2130 (Top roller diameter 28mm)
- PK2135 (Top roller diameter 35mm)
- PK 2155 (Top roller diameter 28 mm) v-draft
- PK 2165 (Top roller diameter 35 mm) v-draft
Different equipment available in same range is:
- OH 2022 - Short Cradle
- OH 2042 - Medium Cradle
- OH 122 - Long Cradle
- LP 1002 - Top Roller Front and Back
- LP 1003 - Top Roller Middle
| Product Code: | Texparts-PK-2100-Series | | |
|
Drafting For Ring Frames Types:
- PK 2025 (Top roller Diameter 28mm)
- PK 2035 (Top roller Diameter 35mm)
- PK 2055 (Top roller Diameter 28mm) v-draft
- PK 2065 (Top roller Diameter 35mm) v-draft
Available Equipments:
- OH 2022 - Short Cradle
- OH 2042 - Medium Cradle
- OH 122 - Long Cradle
- LP 1002 - Top Roller Front and Back
- LP 1003 - Top Roller Middle
Application:Three roller double-apron draft system on short staple ring spinning machines suitable for spinning pure cotton, man made fibres or blends of both types up to 60 mm fibre length. Advantages:
- Had been proven million of times
- Load adjustment on the front weighting elements(4 steps)
- Adaptable load at rear and middle element (2 steps)
- Partial load at front element
- Low Effort needed to open and close the weighting arm
- Ergonomically-shaped handle for safe one hand operation
- Top apron cradle concept with individual tensioning system
| Product Code: | Texparts-PK-2000-Series | | |
|
Drafting For Ring Frames Series PK 3000 weighting arms that we fabricate are for spinning pure cotton; man made fibers or blends of both types up to the fiber length of 60 mm. The air supply to the draft system is in the PK 3000 is completely merged into the support rod. The weighting arm along with the support rod therefore makes up a closed system unit. The PK 3000 system can be installed without any hassle on all the latest ring spinning machines.
Some of the important features of PK 3000 series are :
- These are a complete pneumatic weighting arm system used for short staple ring spinning process.
- Constant load from spinning position to spinning position
- High technological flexibility
- Centralized and infinite setting pressures Rapid assembly and setting
- Simple and easy operation
- Centralized setting of partial load
- Comprehensive quality and safety concept
These series are available in two different types which are:
- PK3025 (Top roller diameter 28mm)
- PK3035 (Top roller diameter 35mm)
The equipment available with the PK 3000 series are:
- OH 2022 - Short Cradle
- DH 2042 -Medium Cradle
- OH 1225 -Long Cradle
- LP 1002 - Top Roller Front and Back
- LP 1003 - Top Roller Middle
| Product Code: | Texparts-PK-3000-Series | | |
|
Drafting For Speed Frames The PK 5000 for speed frames is a weighting arm with pneumatic loading of the top roller for 3 or 4 roller double apron draft system in cotton roving frames. This series is suitable for spinning cotton; both man made fibers and blends types, upto a fiber length of approx. 60 mm. Some of the salient features of speed frames – 5000 series are:
- Constant load from spinning position to spinning position
- Excellent technological flexibility
- Completely pneumatic weighting system for cotton roving frames
- Fast assembly and setting
- Simple and easy to operate
- Infinite and centralized setting of weighting pressures
- Centralized setting of partial load
- Exclusive quality and reliability concept
- Bigger top roller diameter for less lapping
Different types of models that we fabricate are:
- PK 5025 4 Roller version (Top roller diameter 28mm)
- PK 5035 4 Roller Version (Top roller diameter 35mm)
- PK 5025 3 Roller Version (Top roller diameter 28mm)
- PK 5035 3 Roller Version (Top roller diameter 35mm)
Equipments available :
- OH 5022 - Short Cradle
- OH 5042 - Mdium Cradle
- OH 5245 - Long Cradle
- LP 1015 - Top Roller for All lines
| Product Code: | Texparts-PK-5000-Series | | |
|
Drafting For Speed Frames We fabricate Speed frames 1500 series in two specifications, 3-Roller and 4-Roller. These are used in double apron draft system for roving frames suitable for cotton, man made fibers or blends of both types up to approx. fiber length of 60 mm. These are made of qualitative raw material procured from reliable vendor base. Available in different specifications these can further be customized as per clients’ requirements.
Some of the key features of Speed Frames 1500 Series are:
- Reduced number of ends down (improved process reliability)
- Higher efficiency
- Greater package density
- Reduced fly generation
Some of the types of Speed Frames 1500 series that we manufacture are:
- PK 1500 4 Roller Version(Top roller diameter 28mm)
- PK 1500 3 Roller Version (Top roller diameter 28mm)
- PK 1500 3 Roller Version (Top roller diameter 35mm)
Some of the equipments available in our range are:
- OH 514 - Short Cradle
- OH 534 -Medium Cradle
- OH 524 - Lone Cradle
- LP 1015 - Top Roller for Front and Back
- LP 1017 - Top Roller Middle
| Product Code: | Texparts-PK-1500-Series | | |
|
Filter Press We have solid –Liquid separation equipments in various permutation combinations in Size of plates and No Of Plates depending on the requirement from the operating plant. Our Ranges starts form 18” x 18” 5 plates The Maximum Size we can offer is 60” x 60” 125 Plates The available in between sizes are 24” x 24”, 32” x 32”, 36” x 36” 40” x 40” 48” x 48” All the above Sizes shall be supplied with different Number of Plates according the requirement. | |
|
Fluted Roller We manufacture a range of Fluted Roller for Speed Frame / Ring Frame which are knwon for the following features:
- Precisely made in thread rolling machine with opposite helix flutes for zero axial thrust.
- Rollers made of alloy steel and précisionly manufactured determine the quality of bottom rollers.
- Precise concentricity of bottom rollers and top rollers.
- Rollers completely hard chrome plated which helps to reduce the lapping.
| |
|
Gearing Unit We are one of the prominent manufacturers of premium quality gearing unit that are extensively used in many industries. Our entire range undergoes a strict surveillance while manufacturing to ensure its efficiency. Available in competitive price range and specifications these gearing units can be customized as per the specification detailed by the clients.
Draft Gear Assembly designed with 16 to 60 Draft. Gear Wheels made of steel hardened and Bore ground with helical teeth for noiseless and frictionless running. Ball Bearing Mounted Shaft Extension Pieces. Easy to change the Draft wheel and Break Draft Wheel. No Alteration to the gearing end frame facilitated by original Front Roller Brackets for all make of Ring frames.
| |
|
Roller Stand We manufacture an assortment of roller stands that have gained wide appreciation for their qualitative features. These products are extensively used in textile industries and are made of premium quality raw material. We understand the requirement of our esteemed clients and fabricate our products accordingly as per size, dimension and other specifications.
| |
|
Solid Liquid Separator We have solid–Liquid separation equipments in various permutation combinations in Size of plates and No Of Plates depending on the requirement from the operating plant. Our Ranges starts form 18” x 18” 5 plates The Maximum Size we can offer is 60” x 60” 125 Plates The available in between sizes are 24” x 24”, 32” x 32”, 36” x 36” 40” x 40” 48” x 48” All the above Sizes shall be supplied with different Number of Plates according the requirement. | |
|
Textile Machinery Armbar We fabricate an array of textile machinery armbar that are widely used in a host of industries. All these products are widely acknowledged for their exclusive features such as durability, high performance and easy maintenance. Made of superior quality steel these products are available in various technical specifications and can also be altered as the requirement of the client.
Made out of steel ground to close tolerance with zinc coated plate finish to avoid rust.
| |
|
Textile Machinery Nosebar Our range of textile machinery nosebar has been appreciated for its exclusive features like dimensional accuracy and durability. All these products are fabricated using premium quality raw material, which are procured from reliable vendor base after stringent quality tests. The nosebars are available in different technical specifications which can further be custom made as per the clients’ requirement
Latest recessed step type Nose Bar to facilitate better short fibre control. Nose Bar fitted on middle roller slide. Completely hard chrome finish.
| |
|
