We manufacture and supply various types of silicone extruded parts including glass beedings, strips, channels, extruded tubings, insulation sleeves, chords, fluid transfer system, silicon rubber tubes, catheters and peristaltic pump tubes in several size and colors. Backed by our advanced technology and machinery we are able to offer high standard and meet military specifications. We are capable of manufacturing intricate parts and complicated profiles as per the client specification. We also offer services related to the product. Our silicone extruded parts are safe as per Indian & international standard and durable. 
 
Applications:

• Flexible electrical insulation sleeving and cable harnessing
• Tubing for household and commercial appliances
• Beverage and vending machines
• High and low temperature hose for industrial machinery and equipment (low pressure)
• Medical and laboratory tubing
  

We provide wide range of silicone molded parts which comprise of bushes, grommets, O-rings, washers, keypads, joint push rod sleeve, gaskets, silicone cap heaters, conductive electrodes, rubber tube or sleeve and heat resistant mask. We also process fluorosilicone elastomers for low temperature applications. We are capable of any type of components without any special setup charges. We have more than 100 silicone formulations for manufacturing exhaustive range of moulded/extruded & hose silicone parts.
 
Advantages:

• High resistance to temperature
• Electrically insulated
• Non-toxic

Applications:

• Silicone Moulding for Medical
• Food Grade
• Automotive
• Electronics
• Consumer Durables

Temperature Range:
General
(-75 ^oF / -65 ^oF to 400 ^oF)
(-59 ^oC / -54 ^oC to 204 ^oC)
 
Durometer: 15-80 Shore A
 
Special
(Low Temp: Down to -175 ^oF / -115 ^oC)
(High Temp: Up to 500 ^oF / 260 ^oC)
 
Specific Gravity: 1.10 - 1.75 (Typical)

We offer premium quality silicone rubber rollers which is ideal for uses in peripheral decking of cylindrical shapes and roll on decorating of large flat or curved surface. The silicone rubber rollers are manufactured in such a way it enhances improving release, reduce friction, wear and abrasion. Apart from this we also offer fluoroelastomer rollers which comprises of outstanding compression set, oxidation and ozone resistance. Our rubber roller category includes offset printing rolls, flexo printing rolls, rotogravure printing rolls and ultra violet printing rolls. Our rubber rollers which exhibits low compression set with good rebound and ozone resistance are available in various shapes and size with hardness between 40 ^o to 80 ^o Shore A.

Our silicone rubber hot stamping rollers are manufactured using high grade material which increases the shelf life of stamping rollers.
 
Specifications:

• Temperature resistivity: Up to 250 ^oC
• Available in various sizes
• Hardness: 40 ^o to 75 ^o Shore A

Unique features:

• Resistant to chemical, cuts & abrasion
• Resistant to heat, ozone and moisture
• Non-stick surface releases tacky materials that can cause wrap-ups at high speed
• Hard, non-porous surface resists pinholes and early failures, which has similar capacitance to rubber and epoxy

Applications:

• Used in high volume treating operations using non-driven rollers
• For bare roll applications and high volume corona treating operations
• For harsh, high power corona treating operations and skip treating applications

We supply silicone rubber hoses using various reinforced material such as polycot, nylon, rayon, aramid yarns, polyester, fibre glass and others with size ranging from 10mm to 100 mm. We also offer silicon rubber hoses with glass fiber for high temperature which is tested on the standard of endurance, proof pressure, burst, vacuum collapse and adhesion.

Test Parameter on Hose:

• Adhesion Test on Tube to Cover: 1400 N/m or 8 lb/in.
• Vacuum Collapse to withstand 17 K pa without collapse
• Burst Pressure Minimum 0.86 Mpa

 
Specifications

Requirement	Cover	Tube	Test Conditions
Original Properties	55 to 75	55 to 75	At Room Temperature
Tensile Min (Mpa)	6.9	6.9	At Room Temperature
Elongation Min (%)	200	150	At Room Temperature

Heat ageing change:

Hardness (Deg.)	-	15	70 hours at 100 oC
Tensile (%) Max	-20	-20	70 hours at 100 oC
Elongation (%) Max	-50	-50	70 hours at 100 oC

Oil immersion change:

Volume (%) Max	100	150	ASTM no. 3 Oil 70 hours at 100 oC
Tensile (%) Max	-50	-	ASTM no. 3 Oil 70 hours at 100 oC

Coolant immersion change:

Volume (%) Max	5 to 20	Reflux 70 hours
Hardness (Deg). Max	-10 to 10	Reflux 70 hours
Tensile (%) Max	-10	Reflux 70 hours
Elongation (%) Max	25	Reflux 70 hours

We supply optimum quality of viton rubber parts (moulded and extruded) including rubber tubes, oil seals, washers, chords, O-rings, metal to rubber bonded items, gaskets and diaphragms. We offer our viton rubber parts in various size and shapes.
 
Advantages of viton extruded parts:
Our range of viton extruded and moulded parts are applied as rubber seals, gaskets and other custom rubber products used in extreme conditions. Some of the advantages are as follows:

• Excellent resistance to oil, silicone oil and gasoline
• Resistance to oxygen, ozone and sunlight
• High temperature resistance

Temperature Range:

 General
(-26 ^oC to 300 ^oC)
 
Durometer: 60- 85 Shore A