Our make ph controller has the facility to control a 230VAC or your required load signal whether it is a dosing pump or any other electrical load.

Simply we have to do is set the low set point and high set point in the controller. Then it will activate the load at low set point and deactivate the load at high set point.

Also we supply ph controller along with dosing pump for pH correction. It can be used in various process industries like boiler feed water, swimming pool etc. to control pH of water.

TECHNICAL SPECIFICATION FOR PH CONTROLLER

Range	0-14 pH
Maximum Input	199 mv. DC
Maximum Display	1999 Counts (3 ½ digit)
Type of display	3 ½ digit 7 segment LED Display
Input impedance	Less than 100 mega Ohm
Accuracy	±0.5% full scale
Slope	95-100%
Response time	0.33 sec
Power Supply	230V AC, 50Hz
Power Dissipation	9V Amp

SENSOR

Electrode	Industrial combined pH glass sensor
Reference System	Ag/Agcl
Reference Electrolyte	Pressurized Gel
Pressure at 25º c	100 psi
Diaphragm	Ceramic
Temperature	0-85º C
Housing	PVC material
Mounting	By-Pass line or Immersion
Water connection	¼” connector for inlet & outlet

INSTRUMENT CASE

MOC	ABS
Size	90x90x150mm for Controller
Protection	IP-65
Mounting	Panel Board
Power supply	Terminal Block
Sensor connection	BNC socket

We are one of the leading manufacturers and exporters of Digital pH Meter. This on-line ph meter compact design provides better accuracy. As Industrial standard sensor is attached with this meter, it gives trouble free performance. Sensor housing is designed to mount at by-pass line, thereby providing convenient mounting of sensor and housing. Moreover single multi-turn pot allows regular calibration of instruments in the easiest way. The installation of LED display allows better visibility.

The different types of Digital pH Meter availed by us are:
 

• Digital pH transmitter
• Digital pH Meter
• Digital pH Controller
• Digital pH controller with dosing pump
  

Following are some of the essential features of our Digital pH Meter:
 

Range	0-14 pH
Maximum Input	199 mv. DC
Maximum Display	1999 Counts (3 ½ digit)
Type of display	3 ½ digit 7 segment LED Display
Input impedance	Less than 100 mega Ohm
Accuracy	±0.1% full scale
Slope	98-100%
Response time	0.33 sec
Power Supply	230V AC, 50Hz
Power Dissipation	9V Amp

 
SENSOR  

Electrode	Industrial combined pH glass sensor
Reference System	Ag/ Agcl
Reference Electrolyte	Pressurized Gel
Pressure at 25º c	100 psi
Diaphragm	Ceramic
Temperature	0-85º C
Sensor Housing	PVC material

Direct mvolt as well as pH readings can be read. Simplified design with latest technology. Calibration can be done with the ten turn pot easily and it is provided in the front panel itself.

Evenly distributed temperature chart gives you accurate temp selection over 0 to 100ºC. There is no need to select the temperature to 25ºC at the time of calibration. Push type switches allows you for convenient handling and long life of instruments.

TECHNICAL SPECIFICATION FOR PH METER(Table top)

Range	0-14 pH
Maximum Input	199 mv. DC
Maximum Display	1999 Counts (3 ½ digit)
Type of display	3 ½ digit 7 segment LED Display
Input impedance	Less than 100 mega Ohm
Accuracy	±0.5% full scale
Slope	98-100%
Response time	0.33 sec
Power Supply	230V AC, 50Hz
Power Dissipation	5V Amp
Temperature compensation	0-100º C (Manual)
For calibration	10 turn pot
For slope adjustment	10 turn pot

SENSOR:

Electrode	Combined pH glass sensor
Reference System	Ag/Agcl
Reference Electrolyte	Pressurized Gel
Pressure at 25º c	100 psi
Diaphragm	Ceramic
Temperature	0-100º C

INSTRUMENT CASE:

MOC	ABS
Size	195x175x70 mm (L x W x H)
Weight in Kg	App. 2
Mounting	Table top
Power supply	Molded cable
Sensor connection	BNC socket
Accessories supplied	Electrode holder and stand assembly

Our make ORP controller has the facility to control a 230VAC or your required load signal whether it is a dosing pump or any other electrical load.

Simply we have to do is set the low set point and high set point in the controller. Then it will activate the load at low set point and deactivate the load at high set point. Also we supply ORP controller along with dosing pump. It can be used to control free chlorine level in water treatment, mineral water and swimming pool applications.

TECHNICAL SPECIFICATION FOR ORP CONTROLLER

Range	±2000mv
Maximum Input	199 mv.
Maximum Display	1999 Counts (3 ½ digit)
Type of display	3 ½ digit 7 segment LED Display
Input impedance	Less than 100 mega Ohm
Accuracy	±1% full scale
Response time	0.33 sec
Power Supply	230V AC, 50Hz
Power Dissipation	9V Amp

SENSOR:

Electrode	Industrial combined ORP glass sensor
Reference System	Ag/Agcl
Electrode material	Platinum
Housing	PVC material
Mounting	By-Pass line
Water connection	¼” connector for inlet & outlet

INSTRUMENT CASE:

MOC	ABS
Size	90x90x150mm
Protection	IP-65
Mounting	Panel Board
Power supply	Terminal Block
Sensor connection	BNC socket

Being a reputed name in the realm of manufacturing Digital ORP meter, our products are specifically designed for the swimming pool industries where both the pH and orp need to be measured. This on-line orp meter is designed to give better accuracy and long life of the instrument. In order to give trouble free and reliable performance,
Industrial standard orp sensor is used with this meter.  There is no need to calibrate this instrument at regular intervals.

The highlighting features that attribute our Digital ORP meter include:
 

Range	±2000mv
Maximum Input	199 mv.
Maximum Display	1999 Counts (3 ½ digit)
Type of display	3 ½ digit 7 segment LED Display
Input impedance	Less than 100 mega Ohm
Accuracy	±0.1% full scale
Response time	0.33 sec
Power Supply	230V AC, 50Hz
Power Dissipation	9V Amp

 
Sensor:
 

Electrode	Industrial combined ORP glass sensor
Reference System	Ag/Agcl
Electrode material	Platinum
Housing	PVC material

Our conductivity standards prepared for calibration is fully traceable to SI units via Standard Reference Materials manufactured by NIST. Conductivity measurements are strongly temperature dependant .So we have designed the temp compensation circuits so accurately. Wide range of usage is across the industry. Manual temperature selection is given from 0 to 50ºC. It can also be used to measure total dissolved solids.

Range	0-20 µs/cm, 0-200 µs/cm, 0-2ms/cm, 200ms/cm,. 0-20ms/cm, 0-
Accuracy	±1% (full scale)
Display	3 ½ digit LED display
Sensor	Glass sensor

We are among the few prominent names in the manufacturing and exporting of Digital conductivity meter. The unique design of our product gives better accuracy and long life and helps monitor the conductivity of the water round the clock.
Besides we provide controller and transmitter model also. For convenient mounting of the cell, standard BSP thread is given at inlet and outlet of the cell, which aids in receiving greater accuracy.
 
The different types of conductivity meter available with us are:
       1. Digital conductivity meter
       2. Digital conductivity controller
       3. Digital conductivity transmitter

Our Digital conductivity meter encompasses the following salient features:
 

Range	0-2 µs/cm, 0-20 µs/cm, 0-200 µs/cm, 0-2000 µs/cm, 0-20K µs/cm
Maximum Input	199 mv. DC
Maximum Display	1999 Counts (3 ½ digit)
Type of display	3 ½ digit 7 segment LED Display
Input impedance	Less than 100 mega Ohm
Accuracy	±1% full scale
Measuring frequency	1000Hz
Response time	0.33 sec
Power Supply	230V AC, 50Hz
Power Dissipation	9V Amp

CELL:

MOC	PPR
Cell constant	1 for DM 0.1 for MB
Electrode	SS316L
Pipeline connection	½” BSP Thread (inlet & outlet).
Height	60mm
Probe connection	¼” SS Thread.
Cell cable	2 mtr long 2 core shielded cable

INSTRUMENT CASE:

MOC	ABS
Size	90x90x110mm 90x90x150mm for controller
Protection	IP-65
Mounting	Panel board
Power supply & cell connectionTerminal Block	Terminal block

We offer premium Chemical Dosing pumps meant for effective water treatment.
They are designed to meet the continuous operation at maximum capacity at maximum pressure and minimizing temperature in the coils of the pump.
For convenient mounting, the pump is designed to locate at top of the chemical storage tank. To maintain better accuracy of the flow rate, the flow adjusting knob can be rotated to a wider angle on evenly distributed flow chart. The wetted parts are made, to withstand highly corrosive chemicals. The diaphragm is made from Teflon material to extend its life. The casing of the pump is made by polypropylene (PP) to operate even in the highly corrosive atmosphere.

The following varieties of Chemical Dosing pumps are exported by us:
 

• BL Chemical Dosing Pumps
• Chemical Dosing Pumps with ORP controller
• Chemical Dosing Pumps with pH controller

Also offers other dosing pumps which include

• Electronic Dosing Pump
• Diaphragm Dosing Pump