Star Laboratories

Cleaveland Flash Point & Fire Point Apparatus Dr 402 B This apparatus is used for determination of Flash point & Fire point of Petroleum Products except fuel oil with open cup flash below 80 deg.C as per specification IP 36 and IS: 1448 (P:69) 1969. The apparatus consist of a cup, heating plate to specific dimension thermometer clip & test flame attachment with swivel joint for passing over test liquid surface in the priscribed manner, heating is control by means of energy regulator fitted to the apparatus. Suitable for apiration on 220 volts 50 cycles AC circuits.

• Cleaveland Flash Point & Fire Point Apparatus Electrical Heating with Energy Regulator Gas Jet Point.
• With Oil Wick Arrangement
• Same As Above- Gas Jet & Oil wick arrangement Combined Model
• Cleaveland Flash & Fire Point Apparatus Voltage Variac (Copper Coil) Comb. Model
• Same As Above- With Digital Temperature Indicator
• Thermometer IP 28C (-5 deg. C to 400 deg. C)
• Polish Wooden Case
• Spare Cup With Handle
• Spare Nichrome Element
• LPG Test Flame Container with Valve

PANETROMETER APPARATUS [As per IP 49, 50 & 167 specifications and also as per IS 1448 (P:60) & (P:93)] This Apparatus is used for penetration test on a wide variety of materials such as greases, petroleum, bitumen, tar, wax, polish, food stuff, rubber asphalts and pharmaceuticals cream. A given force is applied over a given period of time and the depression is made in the sample which is measured in tenths of a millimeters and expressed as penetration. It consists of a head support mounted on a vertical rod which can be adjusted for height. A rack and penion and pointer assembly provides fine adjustment of needle tip to sample and in corporates a slipping clutch mechanism which make reading of penetration and subsequent resetting a sample and accurate operation. The dial graduate from 0-400 in one tenth millimeter sub devision. The instrument is supplied with two sample containers.

 

• Panetrometer Apparatus with container and weights having penetration needle.
  
• Panetrometer Apparatus with container and weights having penetration CONE HOLLOW type.
  
•  Same As Above- but with verier height adjustment system.
  
• Panetrometer Apparatus with Electronic Timer and Electrical Arrangement with Brass Cone And Needle with DIGITAL TIMER DEVICE (Adjustable) .

This is widely used for determination of closed cup Flash Point of Fuel Oil, cut back asphalts, other viscous material and suspension of solids having a flash point about 490C(1200F).The apparatus serve the purpose according to IP 34, ASTM-D-93-58T, IS-1448(P:I) 1960(P:21) and IS 1209/1958 method B. The apparatus consists of Brass Test cup with handle removable cup cover with spring operated rotating shutter having piolet jet, stirrer with flexible shaft. The assembly rests in Air Bath which is covered with Dome shape metal top. The cup is fitted with insulated handle and locking arrangement near cup plange. The assembly rests on a round shaped heater with different temperature regulation system suitable for operation on 220 Volts AC mains.

Optional Accessories:

• P.M Flash Point Apparatus, Elect. Heating with Energy Regulator Control
  (Oil Test Jet and Gas Test Jet)
• P.M Flash Point Apparatus, Elect. Heating with Concealed Hot Plate  & Energy Regulator.(Oil Test Jet and Gas Test Jet)
• P.M Flash Point Apparatus, Elect. with Energy Regulator & Hot Plate F.H.P. Stirrer (Oil Test Jet and Gas Test Jet )
• P.M Flash Point Apparatus with Voltage Variac Control & concealed Hot Plate (Oil Test Jet and Gas Test Jet)
  
• P.M Flash Point Apparatus with Voltage Variac with F.H.P Elect. Motor Stirrer (Oil Test Jet and Gas Test Jet)
• P.M Flash Point Apparatus with Voltage Variac & Electronic Digital Temp. Indicator (Oil Test Jet and Gas Test Jet)
• Semi Automatic Flash Point Apparatus with Electronic Temp. Controller Automatic Dippin Cycle with remote control (oil test Jet and Gas test Jet)
  

Redwood viscometer apparatus are widely used in Petroleum Laboratories, Industries, Oil Refineries, Educational Institutions, Research Organisations for standerdisation and determines the Viscosity of Petroleum products, which flows in a newtonian liquid except cut back Bitumens and road oils at the set temperature, They confirm to requirement of IP 70. Two adaption of Redwood Viscometers are available. Redwood Viscometers No. I for liquids having Redwood Flow 20 seconds to 2000 Seconds and Redwood Viscometers No. II exceeds 2000 seconds. The complete outfit comprises hemmertone finish, copper/Stainless steel bath with drain plug, electrical heating arrangement, Suitable to operate at 220 Volts 50 Hz AC mains Or gas heating arrangement with silver plated oil cup with precision stainless steel jet, ball value, cover, thermometer clip, stirrer and suitable stand with levelling screws. The sample required to be tested, is to fill in to the required level as indicated by the gauge in a cup having a Stainless Steel jet fixed in the bottom. The temperature is maintained during the test by heating the liquid in a bath surrounding the cup, and the flow time for 50 ml of the sample is measured.

Optional Accessories
 
Redwood viscometer No.I

• Gas Heated Model (Without burner)
• Electric Heated Model (Without any control)
• Electric Heated Model with separate energy regulator control
• Electric Heated Model with solid state electronic regulator
• Electric Heated Model with voltage varric copper coil type
• Electric Heated Model with Digital temperature controller cum indicator

 
Redwood viscometer No.II

• Gas Heated Model (Without burner)
• Electric Heated Model (Without any control)
• Electric Heated Model with separate energy regulator control
• Electric Heated Model with solid state electronic regulator
• Electric Heated Model with voltage varric copper coil type
• Electric Heated Model with Digital temperature controller cum indicator