We offer a wide range of stainless steel butterfly valves that are used in various chemical processing and pharmaceutical industries. A butterfly valve is a type of flow control device that is typically used to regulate a fluid flowing through a section of pipe. Known for sturdy construction and high durability, these valves are available in different dimensions and specifications to suit the variegated needs of the clients.

EPDM

Quality: EPDM with peroxides
• Odourless
• Shore hardness A 75 to 80
• Elongation 280 %
• Non-toxic.

Resistance to fluids: this quality resists acids and alkalis, detergents, phosphoric esters, ketones, alco­hols and glycols. It ensures exceptional service on contact with hot water and high-pressure steam, and it has as well as an excellent fric­tion coefficient which eliminates fouling • Service temperature: -40 °C to +160 °C. Conforms to F.D.A. (US) standards and the ruling of 9.11.94. Conforms to BGA

SILICON

Quality: mixture with good mechanical properties and good friction coefficient
• Shore hardness A 70
• Elongation to breaking point 200 %
• Food quality • Service temperature -60 °C to +200 °C (except steam). Conforms to F.D.A. (US) standards and the ruling of 9.11.94. Conforms to BgVV, USP Class VI

Catering to the needs of various industries, we supply a qualitative range of stainless steel pneumatic piston valves. These pneumatic piston valves are widely appreciated by our clients for accurate size and thermal stability. Sturdily constructed, these valves are high performing and offer better durability. Further, these are available at industry leading prices.

 

• DN 38 to 104
• AISI 316 L is used for all parts that come in contact with the product.    
  
• Impervious stainless steel control head (base and cover).
• A N/O - N/C option by reversing the actuator.
• Option of lower pressure springs.
• Option of air/spring control and air/air control.
• Piston seal rings in EPDM standard, teflon (PTFE) or VITON.
• Possibility to adapt a control head with both micro or proximity switches, also without control head but with proximity switches.
• Diaphragm seal rings.
• Internal body, without any dead areas as piston too.
• Manufacturing corresponds with the present higenic requirements.

The high quality filter press we offer used to separate solids and liquids by using the principle of pressure feeding. In comparison to pressure filters, these filters hold more solid per square feet. The machines we offer have got competitive pricing and consist of following features:
• Sizes available - 8", 14", 18", 24" & 33" dia
• Material of construction - SS 304 / 316 / 316 L with high degree of finish
• Available with centrifugal / gear/ lobe pumps
• Scavenger arrangement is provided FILTER PRESS(Zero Hold Up)

Models	Ex Works Mumbai	FOB Mumbai
8"dia*6 Plates	Rs.72,000/	2,100 USD
8"dia*8 Plates	Rs. 86,000/	2,500 USD
14"dia*10 Plates	Rs. 2,05,000/	5,960 USD
18"dia*15 Deep Plates	Rs. 3,60,000/	10,470 USD
24"dia*24 Shallow Plates	Rs. 6,95,000/	20,200 USD
33"dia*16 Deep Plates	Rs. 9,90,000/	23,840 USD

We offer to our clients advanced technology incorporated top labelers, which are used in various industries for the purpose of packaging. These economic machines consume a power of 400V and run with 2 phase stopper motor. Some of the features of these products include:

• Power Source: AC110V/220V 50HZ/60HZ 1PHASE
• Dispensing Speed: 630 0 (16m)/Minute
• Conveyor Width: 160 mm
• Product Height: Max 70 (180 mm)
• Label Height: Max 120 mm
• Label Length: 5/8” (15mm) ~11 4/5”(300mm)
• Label Reel Inner: 1 4/5” (46mm) or 3”(76mm)
• Label Reel Putter: 9 7/8”(250mm)
• Space Between Labes: 1/10”(3mm) Min
• Air Pressure: 4 Bars (For Optional Equipment)

The wrap around labeler we offer to clients function with 2 phase stopper motor. These machines have got a dispensing speed of 16m/ min and consume the power of 460V. Some of the specifications of the products we manufacture include:

• Power Source: AC110V/220V 50HZ/60HZ 1PHASE
• Conveyor Width: 160 mm
• Product Height: Max 140 mm
• Label Height: Max 120 mm
• Label Length: 5/8” (15 mm) ~11 4/5” (300 mm)
• Label Reel Inner: 1 4/5” (46mm) or 3”(76mm)
• Label Reel Putter: 9 7/8”(250mm)
• Space Between Label:1/10”(3mm)Min
• Air Pressure: 4 Bars (For Optional Equipment)

We offer to our clients high performance oriented front and back labeler machines, which are used for meeting various packaging applications. The machines are made up of stainless steel and have got anodized aluminum construction. They consume power of 900V and have got netcon touch screen, which makes them unique from other machines. Some other features of our product range include:

• Voltage: 220/110 VAC 50/60HZ 1 PHASE
• Conveyor Speed: 30m (118”) / min Max
• Dispensing Speed: 30m (118”) / min Max
• Applicator Height: 150mm (5 7/8”)/200 (7 7/8”)mm
• Label Size:150 mm (5 7/8”) x 300 mm (12”) Max
• Conveyor Width: 100 mm (3 15/16”)
• Label Reel Inner: 76 mm (3”)
• Optional: Hot Foil Printer

Dimensions

• Length: 2400 mm (51 3/16”)
• Width: 1500 mm (29 17/32”)
• Height: 1400 mm (55 1/8”)

We offer clients sifter equipment, which have got high application in pharmaceutical industry. These equipments are used to mesh products into fine powder. The equipments are easy to dismantle and clean, have got high degree of surface finish. We can also provide these equipments in double deck arrangement to clients as per their requirement at the most competitive prices.
Features:

• Easy dismantling and cleaning
• High degree of surface finish
• Double Deck arrangement can be provided
• MOC SS 304 / 316 / 316 L
• CGMP with documentation

We offer the best quality rapid mixer granulator machines to clients, which is designed to achieve excellent mixing and consistent granules in the most cost effective manner. These granulators result in providing homogeneous binder distribution and leads to faster tabulating speed. Some of the features of our products include:
• Capacity 25 ltrs to 1000 ltrs
• Suitable for efficient & fast mixing with granulation
• Material handling systems provided for loading & unloading of material
• CIP system will be provided with pumps
• MOC SS 304 / 316 / 316L

The high quality fluid bed dryer we offer to clients reduces the drying time in comparison to machines offered by our competitors. These dryers fulfill various requirements of industries and have got specific features including:

• Tilting & lifting device for product container for easy handling
• Capacity available from 2.5kg to 500kg
• FLP models available
• MOC SS 304/ 316/ 316L

We provide our clients precision engineered range of capping machines, that are used for cap sealing purposes in various industries. These are suitable for all types of round, rectangular and most irregular bottles and containers. Our range of machines are known for low noise and efficient functioning. Available in various specifications, these are highly durable, long lasting and cost effective in nature.

 

Features:

• Positioned by star wheels. It will automatic stop when no bottle or Position is not accurately.
• PLC imported from Japan.
• It can be adjusted easily by different bottle with different star wheel and capping heads.
• Capping torque adjustment is simple and precise.
• Capping head is equipped with magnetic torque controller, which will have no wear and tear. Therefore, the life will be longer than the regular capper.
• Adjustable electronic torque values to eliminate damage to caps and reduce insert wear.
• Most bottle types including PET, PVC, plastic, and glass can be handled.
• Vibratory feeder with stainless steel bowl
• No change parts or special tools required.
• Controlled with touch screen.

These machines are advance in their Mechanism and used for filling different kinds of Liquids. Our premium quality liquid filling machines are designed and developed as per the latest requirement of the industry.

Features:

• Bottom-up filling for no bubble and foam formation during filling.
• Integrated digital control with PLC/Touch Screen controls for easy operation
• Ergonomically designed for easy access for changeovers and cleaning.
• No bottle-no fill system.
• In-line format with low cost automatic filling.
• Does not require highly trained operators.
• Cover with operator safety shield.
• Professional manufacturing techniques using ISO-9001 system.
• Adjustable stainless steel conveyor guide rails.
• Easy to install, simple to operate and require minimum maintenance for maximum performance and long life.
• Liquid contacting part is 316L Stainless Steel complies with GMP standards
• Filling quantity is controlled by servo motor.
• Internal shutoff to protect bottles from nozzle product dripping.
• Designed with intelligent detection system to detect fallen, bottle mis-positioned and other error situation.
• Using digital control system to set up multi filling in the same bottle to increase filling volume.
• Memory slots to store filling parameters for future use.

We provide a range of  highly advanced multi column distillation plants, which are extensively used in pharmaceutical industry for separating or extracting individual substances from liquid mixtures by partial vaporization and subsequent condensation. They are also suitable for producing I.V. fluids, injections etc for injectables as per IP/BP specification. Provided with automatic functions, these are also available in various model ranges to suit the specific application needs of the clients.

• It produces pyrogen free pure sterile distilled water to meet IP/BP standards.
• Designed output can be increasing by 50% by increasing steam pressure.
• Fully automatic plant except 50/80 ltr. plants.
• Model range 50 ltr/hr to 2000 lt/hr.
• MOC SS 304/316L.