We are manufacturing and supplying of Magnetic Field Flux Meter for our esteemed clients. These magnetic flux meter are available in two models such as:

Digital Flux Meter Model-STFM 110:

Model STFM-110 electronic Flux Meter is used for measuring magnetic flux cut. Its search coil is used for general magnetic measurements such as magnetizing force of permanent magnets. Moreover, the Flux of magnetic circuits is used in various types of electrical equipment like stay flux detection end voltage integration.

Specifications:

• Measuring Range: 10³, 104 and 106 Kilomaxwell turns with 100% over range protection.
• Indication: 3 1/2digit panel meter with 12 mm LED.
• Resolution: 1 Kilo max well Turns range.
• Accuracy: ±0.5% of full Scale.
• Input Resistance: 10 Kilo Ohms
• Drift: Less then 0.5% of full scale per minute on 10’Kilomaxwell turns range
• Output Voltage: 1 Kilomaxwell turns range.
• Input Power: 240 V, 50 Hz, 25 VA.
• Output Resistance: 1 Kilo Ohms
• Dimensions: 210 x 95 x 225mm, Weight 1 Kg
• Optional: Recorder output of 1V across 1 Kilo Ohms.

Applications:

These are used for measuring:

• D.C. Magnetic fields
• Ferro Magnetic Detectors
• Field Surveyors
• Production Test Systems
• Voltage Integration
• Hysteresis Loop Tracers
• Magnetic Shielding Tester.

Digital Flux Meter Model-STFM 201:

An advanced version of Model STFM 110, these are high speed precision instrument which integrates with any voltages signal when applied to its input terminals. These are used as Flux Meter, Gauss Meter and voltage integrator and are applied in application such as perimeters hysteresis loop tracers, magnetic field surveyors, production test equipment and have many other applications. The features are:

• Model STFM201 is completely solid state offers dependable low maintenance service The read out is a three and a half digit LED panel meter
• The four digit scale factor allows the user to get output in Maxwell turns, Maxwell or Gauss
• Overall accuracy is ± 0.5% of full scale
• Its magnetic sensitivity is 500 Maxwell to 1.999 x108 Maxwell turns
• Output terminals provide a signal adequate for driving an X-Y recorder
• This feature is useful when DC or AC hysteresis loop tracing is required
• The instrument can be instantly reset to zero by means of a reset button conveniently located on the front panel

Specification:

• Range: 500 Maxwell to 1.999 x 108 Maxwell full scales.
• Accuracy: ±0.5%.
• Out Put: 1 Volt D.C. across 1 Kilo Ohms.`
• Display: 31/2 Digit L.E.D panel meter.
• Drift: ± 1% per minute, maximum,
• Input Resistance: 100 x Scale factor Ohms. Kilo Ohms
• Input Power: 240 V, 50 Hz, 50 VA.

Application

These are used to measure:

• D.C. Magnetic fields
• Ferro detections
• Field surveyors
• Production at System and Hysteresis loop tracer.

We are offering De-magnetizers which are efficient in demagnetizing and magnetizing; any kinds of metals. These can be provided to the clients in two models such as Plate Type, Model 59, 200 and 280.

Features:

• Super efficiency in demagnetizing and magnetizing; suitable for any kinds of metals.
• Merely using tools to pass through or move into a tunnel will cause a good effect.
• Suitable for planned automatic process; be adapted for delivery belts to proceed in order to increase productivity.
• Suitable for large production of component spare parts, attachments, tools, etc.
• Suitable for hand manual tools, etc. for filling magnetism.
• Attached a fan inside for dissipating heat.

Plate type:

These are suitable for general component spare parts, attachments, tools, etc. For fixed way demagnetization.

Features:

• After operating by 20 mins, it must be turned off for 20 mins.
• Automatic Temperature Protection : When temperature reaches to the setting point, the power will be off automatically, and then it will

Model -59:

These are well known for their continuous operation with design of double coil inside to avoid heat.

Model 200:

These are suitable for general component spare parts, attachments, tools, etc, for fixed way demagnetization.

Features:

• Suitable for longtime use and can applied continuously for 24 hours
• With the design of double coils inside

Model 280:

These are Suitable for large production of component spare parts, attachments, tools, etc. for fixed way demagnetization.

Features:

• Suitable for longtime use and can be used continuously for 24 hours.
• Be adapted for delivery belts to precede automatic demagnetization.
• Use for wide range: very effective.
• Attached a fan inside for dissipating heat

A leading manufacturer and supplier of highest Quality Magnetizer. Our quality centric Magnetizers are made from top-class raw materials to ensure better quality of products and satisfaction of customers. We are manufacturing process and assisted by industrially trained professionals who have proficiency and knowledge in this field. We also manufacture best quality products to cater to specific requirements and needs of customers according international standards and norms. Impulse Magnetizers with magnetization fixtures made to customer's specifications to Magnetize, demagnetize and calibrate magnet systems, for example in electro motors, Loudspeakers, sensors etc.

Outstanding Features:

• 2000 Volt max. Voltage
• 10000 Ws Energy
• 25,000 A max. Current
• Siemens PLC
• Digital operator panel
• Digital voltage setting
• 1 V accuracy
• Analog voltage monitor
• Fixture temperature monitor
• Built-in current monitor
• Compact design
• Single shift 1 year warranty

Description:

• It offers proven quality in compact design.
• Operation of magnetization equipment in a 24 hour / seven day a week industrial
• Environment requires only the best design and components.
• Our goal is to be invisible! No problems or concerns with this machine.. We use a 2000 Volt magnetization technique.
• The combination of 2000 V with medium capacitors allows for moderate magnetization
• Impulses. This gives more magnetization field in the magnets with lower losses in the steel.
• Its maximum energy of 10000 Ws meets a wide range of magnetization tasks
• Medium sized Rotors with rare earth magnets
• Production of high magnetic fields in axial coils
• Motor magnetization with 2 or more internal poles
• Production of low-frequent magnetic fields for demagnetization Deep-drawn steel parts with injection molded ferrite

Note: Technical data and specification subject to change. Special Magnetizer can be made on request, customers have to just send their technical data and application required for our engineers.

Star Trace, a quality driven company has been manufacturing and supplying top-class Handheld Gauss Meter, which gives outstanding performance. Our range of Digital Handheld Gauss Meter is manufactured from the highest quality raw materials to ensure better quality of products and customers’ satisfaction. Digital Gauss Meter Model S – 20 B is a low cost Digital Hand Held Instrument for measuring D. C. magnetic fields using Hall Probes. It has two ranges 20 K Gauss. It has developed and manufactured in calibration facility ensures quick check of calibration.

All the controls are mounted on the front panel and are clearly designed. An attractive plastic cabinet with carrying cum tilt bracket makes the instrument light in weight and portable. LED display gives direct reading with 1gauss resolution on the 2k range and 10 gauss resolution on the 20 K range. The unit is supplied with a calibrated transverse Hall Probe of 50 mm x 1.5mm with the actual sensing area of 1sq.mm from the tip.

Circuitry: The control unit comprises of a constant generator, an amplifier and seven segment LED display. An invariable current is made to pass through the Hall probe that when place in a magnetic field produces a voltage proportional to the magnetic filed. This voltage is amplifier circuit and output is read on a digital panel meter calibrated in kilo gauss.

Specifications:

Range Full Scale	0 to 2 and 0 to 20 Kilo Gauss.
Accuracy	± 1 % full scale + one digit of the 2 K Gauss range. ± 2 % full scale + one digit of the 20 K Gauss range.
Resolution	0.1 % of full scale.
Visual Display	3 ½ Digit LED DPM.
Power	9 Volt DC Battery Operate
Size & Weight	80 mm x 40 mm x 100mm and 1 kg approx.

Applications: General purpose of instrument is to accurate flux density measurement on magnetic and electromagnetic components such as relays, DC motors, magnets, loudspeakers, etc. It is very applicable for online production testing.

Note: Technical data and specification subject to change. Special Gauss Meter can be made on request of customers. They have to just send us their technical data and application, required for our engineers.