Cutters

Our patented Micro-shear® cutting action combined with precision ground cutting edges, extra tough 100” thick high carbon steel blades, and ultra slim profile for across in high density areas. Sized for smaller hands and maximum moneuverability. Flush cuts soft wire upto 16AWG (1.29mm).

Our LX with a factory installed lead retainer. Design provides a low profile and non-slip mounting on the shear. Helps prevent flying leads and Components shorting from stray leads.

A special extra tapered cutter head with a ultra-slim tip profile combined with the same Micro-Shear cutting action, precision frinding and tough high carbon steel blades of the standard LX. Ultra-Sharp, precision tip for access in highly restricted areas. Flush cuts soft wire upto 20AWG (0.8mm)

An extremely durable and versatile wire cutter featuring our patented Micro-Shear® cutting action. Tough enough for hamesses and cables with the precision to cut material less than 1 mil. Thick or work in high density areas. Ergonomically shoped, non-slip Xuro-Rubber™ grips and a glare-eliminating black finish for operator comfort. Non-protruding, lifetime warranted flat spring provides excellent “feel” without excessive spring tension. Flush cuts soft wire upto 12AWG (2.05mm).

The 170-IIF features a low pro-file, non-slip, factory-installed lead retainer to help prevent flying lead and component shorting from stray leads.

The 280-II allows easier cutting in difficult areas. A 55° angled head provides excellent sight lines when used in either the vertical or horizontal position. A slim profile increases accessibility to hard to reach surfaces. Light weight, glare eliminating black finish, and non-slip Xuro-Rubber™ grips ensure comfort. Flush cuts soft wire up to 20AWG (0.8mm).

The 670 Cut and Crimp tool features a slim profile (0.085”) that allows accessibility in high density areas and provides excellent sight lines for precise positioning. Swaged leads are firmly attached to PCB , while freshley exposed lead material enhances solderability. High Carbon Steel guarantees durability. Cuts & Crimps soft wire upto 20AWG (0.8mm)

Best results are achieved when the diameter of the hole on the PCB is not larger than 2.5 times the diameter of the wire being cut/crimped.

The 670HD offers the same great features as our 670 Cut and Crimp tool in heavy duty configuration. A larger head (0.115') simplifies positioning and heavy-duty construction provides extended tool life and longer wire capacity. Light weight, glory-eliminating black finish and ergonomically – shaped, non-slip Xuro-rubber grips ensure operator comfort. Cuts and crimps soft wire up to 16 AWG (1.27mm)

Best results are achieved when the diameter of the hole on the PCB is not larger than 2.5 times the diameter of the wire being cut/crimped.

The 450 is an ultra-precise needlessness plier capable of grasping and holding wire less than 1 mil thick with the strength for wire forming. Lead “popping” free, tip mis-alignment and blade crossover will be a memory once you switch to our Tweezer NoseTM Pliers. Radiused edges protect lead wires. Light weight and our patented, non-protruding, Light TouchTM return spring help ensure operator comfort.

A true “electronics production long nose plier” is what we had in mind when designed the 485. engineers and production managers told us traditional drop forged designs were too bulky and lacked the sensitive “feel” required for precision electronic assembly. Our 485 perfoms where the competition failed. 485 features thin profile for access in high density areas, rodiused outside edges, erogonomically shaped, nonslip Xuro-RubberTM grips, a glare-eliminating black finish and light weight for operator comfort.

A true “electronics production long nose plier” is what we had in mind when designed the 485. engineers and production managers told us traditional drop forged designs were too bulky and lacked the sensitive “feel” required for precision electronic assembly. Our 485 perfoms where the competition failed. 485 features thin profile for access in high density areas, rodiused outside edges, erogonomically shaped, nonslip Xuro-RubberTM grips, a glare-eliminating black finish and light weight for operator comfort.

The patented, original strain-relief forming hand tool. Radius and depth of bend are controlled by a simple slide adjuster, which locks firmly in place to privent unintended setting charges, this high carbon steel light weight, glare-eliminating black finish and ergonomically shaped, non-slip xuron rubber grips, Forms lead wires upto 0.030: (0.8mm).

This convenient 8 ounce (227g) applicator bottle features a tapered spout for each application. Inner safety seal keeps mask fresh and prevents spillage in transit.

Note-Rover mask is also available in a one gallon (8.2lbs / 2.75kg)

The most economical way to purchase in 55 gallon drum (Sold by weight)