Steam & Power Engineers

We are providing boiler retubing services where we supply tube profiles including super heater, economizer bank and furnace tubes for boilers of all types. Through this, we tend to serve the client to best of our efforts. This has immensely helped us in helping and very well catering to the various demands of the client.

We are offering boiler upgradation services which helps us and the client in studying the operation, functionality and performance. We visit the site and study the boiler during operation followed with discussion with site engineers regarding boiler performance. Following are the steps we follow in terms of upgrading the boiler:

• Preparation of report on modification to be carried out for revamping / capacity upgradation along with cost estimates.


• Preparation of the boiler performance calculations.


• Preparation of arrangement drawings for modification.


• Preparation of fabrication drawings for equipment / piping / ducting / structures.


• Preparation of engineering specifications for bought out items.


• Supply of materials for example boiler pressure parts, piping, ducting, structures, refractory, insulation, grate, fuel system, instrumentation etc.


• Supply of combustion system modification equipments for example grate, Pneumatic distributors, rotating air dampers, screw feeders, continuous bagasse feeding system etc.


• Pith firing system introduction in boilers.


• Preparation of code calculations and IBR calculations.


• Vendor drawing review.


• Project engineering and coordination services.


• Site supervision and installation services.


• Startup services and performance testing.

With help of our trained personnel, we offer services for fabrication, erection and testing of piping in different industries. We provide our team with regular training sessions which are conducted to let them aware of latest industrial requirements of the clients. Thus, it helps us rendering flawless services in terms of erection and commissioning services for any boiler or boiler-related equipment. Also, we furnish qualified field engineers to assist in start-up and commissioning of steam generating, fuel burning, and environmental equipment.

We are a trusted name in manufacturing hot air generators which are solid fuel fired, with four pass design consuming less space and assuring maximum efficiency. In it the fuel needed for the combustion are- Bagasse, Coal, Wood, Agro waste, Husk and many more. Following are some advantages of our product which makes us a preferred producer:

• Cost effective


• Less maintenance is needed due to the minimum usage of refractory in furnace


• Its vertical design gives easy access for maintenance


• Less pollution is created by using the Dust Collectors

Following are the technical features of our product:

• Capacity - 50000 to 1000000 Kcal/hr


• Temperature:- upto 300c

.

We stand high in terms of providing the most reliable consultancy services pertaining to industrial boilers, waste heat boilers, process boilers and captive power plants. From our end we are offering utmost engineering and consultancy services in the above fields. The areas relate to thermal design to detailing of the complete system.

Our concern is providing the most sort after turnkey engineering and integrated procurement and construction solutions in the oil and gas, petrochemical and power sector. Successfully, we have become collaborative, strategic partner to our clients by offering innovative and integrated solutions to them. Today, we are one the best service providers in the market.

Our company is manufacturing smoke tube boiler, package boilers of three pass, smoke tube type in completely wet back construction without any refractory at the rear. This is an automatic and semi automatic control equipment with compact design requiring less space. These have an easy access for cleaning of smoke tubes. We design these boilers in terms of meeting all the demands of the clients. Following are some features our products has:

• High efficiency


• Easy in maintenance


• Simple installation


• Low running cost.


• Low cost of civil foundation and installation

Further, following are some technical features of our product:

• Capacity -1 to 20 TPH


• Pressure - 10.5 kg/cm2 to 17.5 kg/cm2.


• Steam Temp. - Saturated.


• Fuel - oil,gas,oil cum gas.

Our smoke tube cum water tube industrial boiler possess different features such as suspension burning of bagasse with complete efficiency and accuracy. Along with the burning of bagasse, biogas burning is also possible giving a multifuel simultaneous burning. Following are some advantageous features and further, their technical specifications:

• Quick and easy ash removal causing no pressure drop during ash cleaning.


• Oil burning facility


• Low excess air giving higher efficiency.


• Quick response to load change assuring greater reliability


• Continuous ash discharge


• Easy maintenance.

Technical factors of our product:

• Stepless variation of grate speed: from 0 - 12 M / Hr.


• Capacity:- 1 to 20 TPH


• Pressure - 10.5 kg/cm2 to 17.5 kg/cm2.


• Steam temperature: -saturated.


• Fuel:-multifuel.

We are a well known manufacturer of thermic fluid boiler which are small and medium capacity hot oil heaters. Our boiler is engineered for maximum efficiency even without feed air pre-heater. With this kind of boiler, it is very much possible to install any type of commercial burner, permitting the client to have an easy and low cost after sale service, anywhere needed. Following are some features pof our product:

• Compact dimension


• Quick set-up


• Maximum running reliability

As far as its working is concerned, the possibility to dispose a fluid in liquid phase at high temperature (up to 300 degree C) and with atmospheric pressure turns to be interesting for various industrial applications. The hot oil, when heated can be utilized both as a heat transfer fluid and as an exchange fluid for indirect steam, water or hot air production. Over the years, we have provided consistent improvement and development. Following are some technical features of our product

• Capacity - 70000 to 3500000 Kcal/hr


• Temp - 400 c

We are 24*7 available in terms of trouble shooting and technical audit as per the demands of our clients. As far as the boiler wiring is concerned, it comprises of some basic components which are universal to both gas and oil fired as well as steam or hot water. They all have a power source and boiler controls. Boiler controls serve two purposes, safety and sequence of operation. The wiring for boilers is usually a combination of line voltage and low voltage. The boilers will try to cover here are residential type systems although the principles are the same for larger boilers. Systems include gas-fired hot water, gas-fired steam, oil-fired hot water and oil-fired steam. We are also engaged in services of technical audit. In terms of how much energy is used, energy converted and functionality of the boiler.

Our water heaters are designed, developed and exported as per the the international standard IBR boilers. This heater is an enclosed vessel in which biomass fuel is burned to generate heat and circulate pressurized water.
As long as its working is concerned, firstly, water is converted into steam for power or heating applications. The tubes that are present inside the boiler shell are used in heating the fluids with heat supplied from an external combustion source. Provided with a safety valve ensures safety from over-pressurization and prevents explosion of the boiler. Water is made to circulate through a tubes and is heated externally with fire. In it the the fuel is burned within the furnace thereby producing a hot gas that heats the water present inside the steam generating tube and is highly preferred for high pressure applications.
Following are some technical aspects of the products:

• Capacity - 50000 - 2500000 Kcal/hr


• Temp.- 140c to 220c

We are a trusted name in manufacturing all the pressure parts of water tube industrial boiler such as fabrication of main bank tubes/ convection bank tubes / side wall tubes / riser tubes / tube pannels / side wall / front wall headers except steam drums. Our concern manufactures all most every pressure part of any make/model. We can also customize these products in specifications required by the clients. Following are some technical aspects of our product:

• Capacity - 5 to 100 TPH


• Pressure - 10.5 kg/cm2 to 87 kg/cm2


• Steam Temp- upto 505 deg.c.


• Fuel - Agro waste/ biomass.