this low height hold down action clamp features a unique handle that can be operated from either side or from behind. Unlike the handle of the regular h - series, the clamping bar and the handle of the clamp move in the same direction while locking. This clamp is highly popular in the electronic industry & other industries processing small and delicate components.
The Reverse Action series are constructed of the same durable parts used in the H.V.Series Clamps. These clamps are suitable for applications where the fixture construction, space & handle accessibility will not allow space for the regular action H.V.Series clamps. These clamps feature a wide arm opening of 100o and are equipped with hardened pivot pins and serrated hardened bushings. Clamps feature a swivel base which is welded at the desired angle to the mechanism, then welded either directly to the fixture or alternatively to a base which is offered as an accessory for bolt mounting.
the h. V. Series toggle clamps comprise of a basic toggle mechanism onto which can be welded at a desired angle, the clamping arm and handle which are supplied with the clamp. These models feature a swivel base which is welded at the desired angle to the mechanism, then welded either directly to the fixture or alternatively to a base which is offered as an accessory for bolt mounting. The clamping arm exhibits 180 degree opening angle which enables easy unloading of work piece. Accurately machined steel components are equipped with hardened bushes & pivot pins. Three sizes basic linkages are available which allows the designer complete flexibility to position the base, clamp arm handle and weld them to suit the application.
Horizontal Toggle Clamps of this type are low profile, fast acting Straight Line Action clamps. These clamps are of exceptionally robust construction, featuring forged & machined bases. The handle & linkages of the clamps are from heavy flat sections designed to resist high vibration & forces on the work piece. Plungers are hardened & their precision ground diameter runs in a close-tolerenced hole in the base forging. Plungers are drilled & tapped for easy attachment of threaded spindles or adaptors. These clamps are particularly suitable for operations where the operators hand has to be away from the work piece while locking the clamp.
The particular feature of this series is it’s single hole mounting system. These clamps can be directly mounted through a member by a check nut or by drilling & tapping the member. Designed with low clamping pressures these clamps are ideally used as locators, reference tools & for assembly fixtures. When flush mounted the plunger of the clamp retracts completely from the work area giving full clearance for unloading of the work piece. All clamps lock in the closed as well as in the open position & hence can be used as pull-action clamps.
The handle moves a complete 1800 while locking in either positions & can be swivelled into any position in the other axis to suit the various space requirements. All the straight line action clamps of this series have a hardened & ground tapped plunger.
Horizontal Toggle Clamps of this type are extremely compact for their large capacity, these low height clamps lock in the either extended on retracted position. The clamps are designed with low plunger heights to meet limited overhead working space. Plunger is hardened & ground to give maximum operations & is drilled & tapped for easy attachment of threaded spindles or adaptors. Handle & linkages are press cut from heavy guage sheet metal. This series offers the maximum stroke length compared to any other, HTC-Series clamps.
This series is identical to the HTC PS with the exception of the base design. For situations where a vertical surface is used to mount the clamp a straight base can be used.
This is the smallest of the HTC - Series clamp with a plunger stroke of 20 mm and center height of 12 mm. The plunger of the clamp move forward and locks as the handle is moved forward. The clamp is ideal for electronic applications & similar small fixturing.
This model is ideal for clamping of doors, lids, or access covers onto drums, containers or other vessels. The clamps add lot of aesthetic appeal to your equipment then the conventional clamps. Clamp is supplied with ergonomic handle grip.
Pull Action Clamps derived from the Toggle lever principle enable quick clamping of flaps, lids, doors of moulds or access covers on to drums, containers or other vessels. The clamps are suitable for clamping moulds in the resin, expanding foam and the fibre glass industry as well as for applications in the chemical & the food industry. The threaded U-Bolts permit easy length adjustment & provide a positive connection with the supplied latch plate. While installing it is important that the horizontal variants of the clamp & latch bracket are in alignment when viewed from both the top & the side, to ensure that the clamp locks positively.
The Plunger Clamps have the same straight line action and features of the HTC - Series clamps. The unique feature of these clamps is the collet type bushing that can be adjusted to eliminate plunger end movement after long, repeated usage. The plunger moves forward and locks as the handle is moved forward. Plunger also locks in retracted position when handle is moved backward. The handle moves a complete 1800 while locking in either positions and can be swivelled into any position in the other axis to suit the various space requirements. The handle and linkages are from heavy sections designed to resist high vibration and forces on the workpiece. Both the models of this series have a hardened and ground tapped plunger.
Built in clamping range automatically compensates for variations in part thickness. Cam Clamps are similar to Vertical clamps but the clamping force is generated not by a toggle linkage but by the action of a roller on a cam. The Steel - Smith Cam Clamps have a high to low limit clamping range that automatically compensates for part thickness variation & therefore eliminates time consuming readjustments. Cam Clamps are available in three sizes offering part variation thickness allowance from 3 mm to 5 mm. These clamps are ideal for fixtures designed for clamping of castings & forgings.
The pivots pins, cam & its roller are hardened for higher efficiency of clamps.
The Steel - Smith FB Clamps are designed to replace “C” Clamps. The moveable Jaw of the Clamp can be adjusted to the required Clamping Height within seconds. Clamping Pressure is applied by the acme thread screw as required. The Jaws of the Clamps are made of high-grade investment casted iron & are powder coated for improved protection against corrosion. These Clamps feature a ergonomic wooden handle or a tommy bar for operators comfort. The quick & wide clamping geature of this clamps makes it a handy & a highly useful tool in toolrooms, fabrication, carpenters work shop etc. Flat Bar Clamps are available in a variety of sizes, with Throat depth from 80mm to 150mm & Clamping length from 100mm to 1,000mm. Custom made Clamps are also available.
These clamps are the smaller version of the PAH - Series clamps. The clamps are available with a holding force of 100 to 200 Kgs. The threaded U-Bolts permit easy length adjustment & provide a positive connection with the supplied latch plate. While installing it is important that the horizontal variants of the clamp & latch bracket are in alignment when viewed from both the top & the side, to ensure that the clamp locks positively.
the clamping action of the pav series is perpendicular to the base of the clamp. These clamps are ideal for installations on lid closures where it is preferable to mount the clamp on the top face of the lid & the latch plate on the side face of the vessel. The 'u - bolt' is threaded for easy adjustment.
This clamp is unique in having an action similar to the hold down action clamps, but having a flanged body which can be bolted to the fixture or mould against which the work piece or mould half is to be clamped. The clamping arm, when opened moves a full 900 to clear the workpiece. Clamp is supplied with a standard bolt retainer which can be welded at any desired angle on the clamping arm. A comfortable, cushioned PVC grip is fitted.
This series has more models than any other series manufactured by Steel - Smith. These models have a flange base for drilling and bolting onto the work position. The clamping bar and handle are offered with different variations to suit individual requirements. All models are provided with stop pin for the safety of the operator. The clamping arm exhibits a minimum 900 opening angle for easy unloading of work piece.
having a 60mm wide jaw this plier has a complete surface contact in the clamped position, distributing pressure evenly on the clamped surfaces. The plier locks with a powerful grip making it ideal as a sheet metal tool and for applications such as bending, forming and crimping.
The TP-FB series pliers are similar to the TP series pliers with the exception of the handle design. These pliers are fitted with a quick release lever which enables easy & fast manual opening of the clamping jaws. The FB series have a deeper throat depth & more distance between the jaws in the clamped position.
Steel - Smith Toggle Pliers utilizing the toggle principle are made of heat resistant drop-forged steel. Toggle pliers are portable clamps & are not required to be mounted on the fixture. Toggle pliers can have their clamping position pre-set for quick & repetetive clamping. The adjustment is very easy & is done by moving the spindle either forward or backward till the required clamping thickness is achieved, the clamping pressure can be increased or decreased by moving the spindle half a turn as required. A relatively light hand pressure locks the plier with a heavy grip & stays locked until the handles are pulled apart. The range of jaw openings & depths in the toggle pliers allows them to be used in all areas of the manufacturing industry and also over obstacles such as flanges etc.
These Pins are precision ground Locating Pins. By simply pressing the button of the pin you can either insert or remove the pin. The balls in the pin ensure Positive Locking until released by pressing the button. The Ball Lock Pins are available in 6 different outer diameters & the length is to be decided by the customer as per the application. The standard pins are offered with Two locking balls, but can also be supplied with four balls for greater pull-out strength. Available in alloy or stainless steel.
These models feature a drop forged clamping arm which can be drilled and tapped for mounting either and adjustable spindle or a special clamping element. The ‘A’ series has an angle base for drilling and bolting into work position. It also has a deeper throat depth and more height under the clamping bar in closed position.
the base straight series is identical to the swivel base series with the exception of the base design. For situations where a vertical surface is used to mount the clamp a straight base can be used. The b. S. Series clamps have more height under the clamping bar in the closed position. The clamp opens a full 180o to completely clear the work area. The handle and the clamping arm supplied with the clamp can be welded at a desired angle. Similar to the swivel base series clamps the bushes and pivot pins are hardened for higher efficiency of the clamp. The clamps are available in three sizes.
M. V. Scientific Supplying clamp, pinch clamp, metal pinch clip, three finger clamp, compact design three finger clamp, precision three finger clamp, light weight three finger clamp and laboratory three finger clamp along with laboratory glassware.
Prince Decoware Industries Supplier and manufacturer of hardware fittings which includes drawer channels, fitting drawer channel, furniture drawer channel, auto clos, floor springs, glass door lock and floor spring fitting.
Processing...
