Our company is engaged in the manufacturing of semi automatic band saw machine, which is used for cutting steel rods. Serving to the industries like, automobile industry & automobile vendors, this machine is all set up, but some functions have to be done manually too. The standard specifications can be summarized as follows:

Cutting Capacity	250 & Sq. 230 X 230 mm
Blade Size	3760 X 27 X 0.09 mm
Drive Motor	3 H.P.
Hydraulic Motor	1 H.P.
Coolant Pump	0.15 H.P.
Machine Operations	Hyraulic
Cutting Speed	22,44,66,88 m/min (4 step SPZ- pully)
Band Tension	Manual
Overall Size LxWxH	1975 X 600 X1730 mm
Machine Weight	450 Kg.

This machine are very useful in after cutting processes of rods. The centering plunge facing machine is used to make the cut rod smooth & equal as these rods when cut into pieces are not smooth & equal. The standard specifications can be summarized as follows:

Specifications

Admitted work length. a) With single vice min. b) With double vice main. c) With double vice max.	40 mm. 110 mm. 500 mm.
Min. job dia. clamped in vice	15 mm.
Max job. dia. clamped in vice	125 mm.
Job Clamping System	Self centring vice by Hydraulic Motor (Force 2000 kgs.)
Rapid travel speed	4200 mm/min
Spindle speeds	750 , 1000 RPM
Max Stroke of slide	50 mm.
Slide feeding	Infinitely variable with hydraulic.
Max. plunge face diameter	63 mm.
Centre drill sizes	BSS3 to BSS6 / as per ISI.
Total machine power a) Spindle power b) Hydraulic motor power	10.15 H.P. 3 H.P./each 4 H.P.
Coolant motor	0.15 H.P./40 lpm.
Over all size LxWxH	2000 X 1300 X 1600 mm
Machine Weight	1250 Kgs.

We are engaged in the manufacturing of automatic band saw machine, which is widely used in automobile industry & automobile vendors. This machine is used for cutting stainless steel bar rods and thus helps in further process of manufacturing. Our manufactured machine is organized in a well manned and the setting is such that, there is no requirement of human efforts. The standard specifications can be summarized as follows:

Cutting Capacity	Ø 250 & Sq. 230 X 230 mm
Blade Size	3760 X 27X0 .09mm
Feed Length	0-400 mm
Drive Motor	3 H.P.
Coolant	0.15 H.P.
Machine Operations	Hydraulic
Cutting Speed	22,44,66,88 m/min (4 step SPZ- pulley)
Band Tension	Manual
Overall Size LxWxH	1975 X 1950 X1730 mm
Machine Weight	1050 Kg.
Bundle Cutting Size ( Optional Equipment )	110 -150W X 60-100H mm

We have a range of milling machines, which are manufactured according to client’s specifications like size, shapes, etc. To keep a check on the quality, we mark our products on the different technical parameters including input power, linear speed, operating range. Our milling machines are used in automobile industry for auto parts manufacturing. Our milling machines can also be fabricated according to the user’s requirement.

Our company is engaged in the manufacturing of double column band saw machine of the model number DCA- 340, which is fully automatic. Widely used in automobile industry & automobile vendors, this machine is used for cutting steel bar rods and more rigid material and are more powerful than above automatic band saw machines. The standard specifications can be summarized as follows:

MODEL	DCA- 340
Cutting capacity in mm	Dai: 340 & SQ. 340 X 340.
Blade size in mm	3920 X 32 X 1.1
Saw motor capacity HP	5 HP
Hydraulic motor capacity HP	1.5 H P
Hydraulic tank LTR	60 LTR
Coolant motor HP	0.16 HP
Coolant tank LTR	50 LTR.
Approx. Machine Weight	1500 KG

We manufacture boring machines which are basically used for making holes. It is widely used in auto parts industry for spearing knuckles in car steering. Designed & engineered as per the desired specifications of the clients, we offer machines that are quick & consistent in their performance.

Vertical bandaw machine Model:VT-350SA is suitable for runner -riser cutting, plate cutting, & other odd shape jobs. Work table provided is Hydraulic feeded. Asper the type of job, clamp the fixture for job clamping on work table & feed across the saw blade. Feed is controlled by Pressure & temp. compensated feed control valve.Seperatye Hydraulic power pack is provided to perform the operations automaticaly.

We manufacture deep hole drilling machines which can slide with LM rail and LM blocks. Product Specifications

• Available with drilling wood peck cycle
• Drilling length of 500 mm.
• The Concentricity achieved is from 0.5 mm. for dia. 10 mm drill.
• Available with three spindle drilling head, three Component at a time.

SPECIFICATION OF DOUBLE COLUMN SEMI- AUTOMATIC BANDSAW MACHINE MODEL-DCM-421:

• Induction Hardened & Hardcrome platted twin
• Column of EN -9 materials with Bellows protection.
• Hydraulic power pack with Direction control Valves of Yuken  make.
• High efficiency transmission through 5 size gearbox
• With extra roller bearing on output shaft.
• Electrical control panel with PLC.
• Digital piece counter for work piece measuring.
• Stepped pulley drive with 4 steps speed.
• Automatic height adjustment of saw head.
• Hydraulic band tensioning.
• Power driven chip brush
• Complete coolant system with coolant pump.
• Manual lubrication unit.

 

MODEL	DCM- 421
Cutting capacity in mm	DAI 430 & SQ.430 X 430.
Blade size in mm	5300 X 41 X 1.3
Saw motor capacity HP	5 HP
Hydraulic motor capacity Hp	1.5 H P
Hydraulic tank LTR	60 LTR
Coolant motor HP	0.16HP
Coolant tank LTR	50 LTR.
Approx. net Wt.	1200KG

We manufactured qualitative double column band saw machine of model DCM-550. This machine is semi automatic and is used for cutting steel bar rods and more rigid materials. This machine is widely used in automobile industries & automobile vendors. This machine is more powerful than Semi Automatic Band Saw Machine. The standard specifications can be summarized as follows:

MODEL	DCM- 550
Cutting capacity in mm	DAI 550& SQ.550 X 550.
Blade size in mm	6270 X 41X 1.3
Saw motor capacity HP	7.5 HP
Hydraulic motor capacity HP	2.0 H P
Hydraulic tank LTR	80 LTR
Coolant motor HP	0.5HP
Coolant tank LTR	80 LTR.
Approx. Machine Weight	3500 KG

Features:

• Blade is- Guided by Tungsten Cacbide wear pads &
  
• Hardened Guide roller to improve the blade life.
  
• The machine is suitable for cutting Risers.
  
• Runners of Casting.
  
• Critical Shapas Plate,.
  
• Sheets.
  
• Round Hex.
  
• Square of all types of materialand even evan Angular cross sections
  
• Bad wheels are Grade C I material.
  
• Speed Rsduction is given through High Power Transmission Gear Box
  

STANDARD EQUIPMENTS:

• Machine with T-Slot work table.
  
• Power driven chip Brush Assy
  
• Coolant syslem pump & piping.
  
• Ont M42 Grade Bimetal Blade
  
• Hydraulic power pack lor SA model
  
• Operational TooIs & Spanner
  
• Work Lamp
  

 OPTIONAL:

• Chip Brush.
  
• Bimetal Band saw Blade
  
• Roller Table.
  
• Special Manual or Hydraulic Fixtures.

SPECIFICATIONS

THROAT	350 mm
HEIGHT	500 mm
WORK TABLE	500 X 700 mm
BLADE SIZE	3760 X 27X 0.9 mm
CUTTING SPEED	22, 44, 66, 88 m/min
DRIVE MOTOR	2 H.P.
COOLANT MOTOR	0.12 H.P.
HYD. MOTOR	1 H.P (SA Model)
HYD. SLIDE STROKE	400 mm (SA Model)
BLADE TENSION	Manul Hyd. Optinal For SA Model

STANDARD FEATURES OF DOUBLE COLUMN HEAVY DUTY BANSAW MACHINE MODEL DCA 260

• Induction Hardened & Hardcrome platted twin Column of EN -9 materials with Bellows protection.
• Hydraulic power pack with Direction control Valves,
• High efficiency transmission through 5??? size gearbox With extra roller bearing on output shaft.
• Electrical control panel with Omron make PLC.
• Digital piece counter for work piece measuring.
• Digital length setting counters for correct length setting.
• Indexing shuttle vice for bar feeding automatically.
• Stepped pulley drive with 4 steps speed.
• Automatic height adjustment of saw head.
• Hydraulic band tensioning.
• Power driven chip brush
• Complete coolant system with coolant pump.
• Manual lubrication unit.
• Floating shuttle vice to accommodate bend bars smoothly

 

MODEL	DCA- 260
Cutting capacity in mm	DAI 260& SQ.260X260.