The precision engineered foundation anchor bolts offered by us are available in IS : 2062, IS 1018, Grade A, En-8 En-19 material and are designed and constructed as per IS-1367 Class 8.8 / Class 10.9 or as per the requirements of the customers.

Features:

• Manufactured as per ASTM 1554-1999, IS-5624, Din 529 with 2 nuts & washers Type A, B, C & D
  
• J Type / L Type Foundation Bolts with Class 8 nuts, 1 washers and 1 lock nut
• Plate Type Foundation Bolts with 1 nut & 1 washer
• Long length (up to 6000 mm) Rock Bolts in Torr-Steel with 1 nut & 1 washer
• Rail Track Foundation Bolts with 1 nut, 1 washer, 1 spring washer
• Other Foundation Bolts as per specific requirements & drawing

Using IS : 2062 Grade A, material or inSS-304, SS-316, SS-316 or any other material as per customer's specification.

Surface Treatment: Zinc Plated with Yellow, Blue, Olive-Green passivation. Threading sizes from 6mm to 80mm with 1 Nut & 1 Washer.

We offer clients a wide range of nuts and bolts. These are offered with surface treatment like Blackodised, Phosphated, Zinc Plated with yellow, blue, olive green passivation. Further the range is available in threading sizes like M6 to M100 ISO, Metric 6g, as per IS:4218 or equivalent in BSW / UNC.

Features:

• Using IS: 2062 Grade A, En-8, En-19, SS-410, SS-304, SS-316 or any other material as per customer specification
  
• As per IS:1367 Class 5.6, Class 8.8, Class 10.9, ASTM A 193 B7, B8, B8M, A2-70, A4-70, A4-80. Dimensions of Hex Head Bolts / Screws as per IS:1364, ANSI B18.2.2, IS:3757 / DIN:6914 or as per customer requirement
  
• Dimensions of Hex Head Fit Bolt as per IS:3640 / DIN:610 or as per customer requirement
  

Surface Treatment:

• Blackodised
  
• Phosphated
  
• Zinc Plated with yellow, blue, olive green passivation
  

Threading Sizes:

• M6 to M100 ISO, Metric 6g, as per IS:4218 or equivalent in BSW / UNC
  

Available Range:

• Full Thread Hex Screws
  
• Half Thread Hex Bolts
  
• Hex Bolts for Steel Structures as per IS:6639
  
• Special Hex Bolts as per DIN 561, DIN 933
  
• Other Hex Bolts as per your specific requirement and drawing
  

Our steel washers are manufactured by using IS:2062 Grade A, En-8, En-19, SS-410, SS-304, SS-316 or any other material as per customer's requirement.

Surface Treatment: Blackodised, Phosphated, Zinc Plated with yellow, blue, olive green passivation.

Threading Sizes M4 to M72 ISO, Metric 6g, as per IS-4218 or equivalent in BSW / UNC of following types:

• As per IS:2016 Type A Punched Washers for Hex Bolts & Screws.
• As per IS:2016 Type B Punched Washers for Round & Cheese Head Screws.
• Any other Washers as per customer's requirement.

Manufactured as per customer requirement.

The range of threaded bars and studs offered by us come with a wide range of surface treatment finishes like blackodised, phosphate, zinc plated with yellow, blue, olive green passivated.

Further these feature threading sizes from M6 to M100 ISO Metric 6 g as per IS:4218 or equivalent in BSW / UNC.

Features:

• Using IS: 2062 Grade A, EN- 8, EN- 19, SS-410, SS-304, SS-316 or any other material as per the specification of the customers
  
• As per IS : 1367 Class 5.6 / Class 8.8, Class 10.9, Class 12.9, ASTM A193 B7, ASTM A193 B8, B8M, B16, ASTM A563 L7, L7M
  

Surface Treatment:

• Blackodised
  
• Phosphated
  
• Zinc Plated with yellow, blue, olive green passivation
  

Threading Sizes:

• From M6 to M100 ISO Metric 6 g as per IS:4218 or equivalent in BSW / UNC
  

Available Range:

• Full thread studs as per DIN 975. Rods with Threading on one side as per DIN 524
  
• Studs with threading on two sides as per DIN 939, DIN 940, IS 1862 Type A, B & C.
  
• Tip-welding studs
  
• Tie rod studs for plate type heat exchangers
  
• Square / ACME thread studs (Lead Screws).
  
• Other studs as per clients specific drawing & finish requirements

Threaded Bars

Further the threaded bars offered by us are available in following finishes:

Condition	Cold Drawn
Threading Diameter (Size)	M8 to M40 (5/16" to 1--1/2")
Grades	304, 304L, 316,316L
Threading Condition	Fully Threaded
Threading Method	Thread Rolling Thread Type ANSI B1.1 Class 2A
Fit Length	2/3/4 meter (6/12ft)
Length Tolerance	-0 /+50 mm (-0"/+2")

Bracing rods, ( 16mm Bar with pre-threaded ends attached to Galvanized Turnbuckles) for welding directly onto steel columns. They are installed in trees to reduce the potential for co dominant stem splitting or to repair splits

Function:

• to reduce the risk of breakage in codominant stems traditionally has been below the crotch.

We offer clients precision engineered range of cylindrical (Dowel) pins & taper pins. These are available in different finish specifications/material grades as per the requirements of the clients.

Cylindrical (Dowel) or Parallel Pins:

• These are used either to retain parts in fixed position or to preserve alignment
  
• The manufacturing range for cylindrical (Dowel) Pins is 2mm to 75mm in diameter & 5mm to 150mm in length
  
• These can also be hardened from silver steel material
  

Internal Threaded Cylindrical (Dowel) Pin:

• These are for easy extraction, from blind holes
  
• They are manufactured in soft condition from C-40 material
  
• Hardened Pins are manufactured from case hardened alloy steel or as per buyers requirements
  
• Provision of air vent may be provided
  

Taper Pins:

• These are preferred for parts which have to be taken apart frequently & when driving out the cylindrical pins, would tend to wear holes as well as meet the requirements of very accurate constructed tools and gauges which have to be kept in absolute alignment.
  

They are manufactured as per IS:6688 or DIN-1 or BS-46.


External & Internal Threaded Taper Pins:

• These are used for extraction of pins more conveniently
  
• External & internal threaded taper pins are made & supplied in soft condition (EN-8)
  
• They are manufactured as per IS : 3524 and DIN - 7978 / DIN – 7977
  
• Ext. third taper pins can also be manufactured to DIN - 258 or to customers specifications.
  

Range:

TOL. ON DIA. h11 (SOFT)	Type - A
TOL. ON DIA. h8 (SOFT)	Type - B
TOL. ON DIA. m6 (SOFT)	Type - C
TOL. ON DIA. m6 (SOFT)	Type - D
TOL. ON DIA. m6 (SOFT)	Type - E
INTERNAL THREADED (HARD)	Type - F
INTERNAL THREADED (SOFT)	Type - G
TAPER - 1:50 (SOFT)	Type - Pin

 

We offer clients a wide range of precision engineered sealing plugs that are designed and constructed as per the prevailing industry standards. Further their close dimensional tolerances also ensure in them optimum compatibility and functionality standards.

Features:

• Using IS : 2062 Grade A, En-8 En-9, SS-304, SS-316, material
  
• Designed and developed as per IS-13338 Din 910, Din 908, IS : 9645
  

Standards Followed:

Din 906	Taper Plug
Din 908	Collar Plug
DIN910	All types collar plug

We offer clients a wide range of precision machined components including spare parts and special fastener products that are designed to meet the specific industrial process requirements. We can deliver these in client specific material grades as well as finishes.

Features:

• Range offered include machined components, spare parts & special fasteners as per customer's requirements
  
• We can also undertake job work on labor charges as per customer's requirements