We offer clients “INTERBUS” automation software, open control hardware, I/O components & configuration tools, which provide open & continuous automation solutions including serial field networking. Some of the products offered under this include:

• WLAN
• LAN Managed Switches
• Ethernet Installation
• PROFINET
• INLINE Block I/O Modules
• SWITCHES with Gigabyte Tech.

We offer a wide range of “Modular Terminal Blocks” that come with modern features and find usage for mounting on the rails in the control panels as well as on printed circuit boards. The “Combicon” range of pluggable PCB connectors we offer provide efficient wiring solutions. Further the “Pluscon” type of industrial plug connectors facilitate heavy duty and high-density wiring. The range we offer under this include:

Range :

• SAC Cables
• SACB Boxes
• SACC Plugs & Sockets
• FLUSH Type Connectors
• PCB Connection System COMBICON
• Industrial Connection Technology CLIPLINE
• MKDS 10 HV
• Spring Cage Technology

We offer clients a wide range of relay and solid relay interfaces which are well known for providing optimum performance. These safe electrical isolation and switching interfaces ensure reliable electrical signal transfer in automation systems. Further electrical isolation in combination with voltage, current & power matching ensures trouble-free operation between control unit & sensor/actuator level.

Features:
• These are simple to install and start-up.
• Consists of 6.2 or 14 mm slim base terminal blocks
• Comes with plug gable relays or solid state relays with practical switching capacities of up to 250 V AC/10 A.

Range:
• PLC Series
• DEK Series
• PR Series
• ST Series
• EMG Series

PLC-INTERFACE coming with flexible modular structure is now offered in extended range of relay interfaces including PLC-R and solid-state relay interfaces PLC-O in modular terminal block formats. Electronic load and reversing load relays: We also offer electronic load and reversing load relays for meeting the requirements of 3-phase networks (Wear-free Switching). These offer:

• Practically unlimited mechanical life along with same functions as in mechanical contactors.
• Triggered with low capacity, they switch electric machines & motors up to 4 kW.
• Does not produce any additional high frequency interference during non-contacting switching with power semi-conductors at the zero voltage crossing.
• Very compact & fully electronic alternative to mechanical reversing contractor combinations.
• Control inputs and the wiring on the load side comes integrated in the module.
• Equipped with a protection circuit on the input and output side.
• Protect the modules against damaging voltage peaks.
• Connected with a minimum of wiring
• Guarantee maximum availability of the system.

Our extensive research in the area of Transient Absorption Technology has helped us to offer clients “Flashtrab” Lightening Current Arresters & “Valvetrab” Surge Voltage Arresters that provide due protection to the Power Supply Lines. We also offer under these brands surge protection devices for Measurement, Control and Regulation signals as well as surge arresters for data & telecommunication industry.

Subtle Control Systems is engaged in the manufacturing of Variable Wiring Interface Cables for PLC & CNC Machines according to the specific requirements of the clients within a stipulated time frame. These are manufactured by best quality raw materials and are available at market leading prices.

We offer clients a wide range of electronic security systems. Manufactured by reputed company Zicom, these products offer superior security options. Restricting unauthorized entry, these offer complete peace of mind even when one is away from their homes. The range of products offered by us include:

Range
• Gas leak sensor
• Motion sensor
• Magnetic sensor
• Color & B&W video door phone
• Burglar alarm system
• Magnetic sensors
• Hooter

Features
• Detects intrusion
• Detects gas leak
• Free insurance
• Wireless operations24x7 online alert service
• Easy to operate
• Remote keys
• 1 year warranty

We offer clients tested and high performance oriented Saint Elmo lightning conductors which consists of following three main parts:

CAPTURE HEAD : Profiled, in alterable & a good conductor, which are structured to generate a forced air circulation at its tip and at its prolagation.

SUPPORT POLE : This is treated copper whose upper part has one or more stainless steel ion emitter points. It is inserted in an insulating sleeve & subjected to floating potential. They are protected from direct impact by lightning & from weather by the capture head which like pole, is permanently connected to earth potential.

TRANSDUCER(piezoelectric stimulator) : It is built in the lower part of the pole and consists of piezoelectric ceramics stressed in an insulating container, which is combined with simple and completely reliable loading system. A high-voltage cable running along the interior of the pole connects the simulators to the emitter point.

Features: It uses Piezoelectric ceramics & stimulation technology. It also offers:

• Reduction of corona effect excitation time and lowering of the breakdown potential:
• The increase of the local electric field
• The presence of a seed electron at the capture point (electron that is rare in the atmosphere and indispensable to the excitation process)
• The creation of rising ionised air channel (Up streamer) in the prolongation of the lightning conductor

We offer earthing electrodes designed to reduce soil resistivity locally & improve the resistance of grounding systems. Our products provide effective earthing, which ensures safety to human life, appliances, machines, equipment.

Further their durable construction provides clients total maintenance free solutions for 10 years and makes them suitable to any application requiring high performance earthing.

Installation

Installation method of ‘Ash’ Safe Earthing Electrode:
• Augur / Drill / Bore a hole of 6 - 8 Inch in diameter (as per site condition) at a place where earthing is to be done, to a suitable depth of 2 or 3 meters (Electrode Length)
• Place the Earthing Electrode inside the pit
• Mix the back fill compound nicely with the soil, which has been dug out.
• Re-Fill the empty space around the Earthing Electrode with this compound mix soil
• Pack the soil around the Electrode tightly and nicely
• Again pour adequate water at least 3 - 4 feet around the Earthing Electrode
• Test the earth resistivity of the Electrode and if the result is satisfactory, then connect it with the equipment
• If the result is not satisfactory, then allow the Electrode some time (2/3 Weeks) for setting of the soil and then check it & connect it
• If the soil is of high resistivity i.e. Semi rocky or rocky soil, use back - fill compound only for refilling the PIT

Features
 
• Revolution in Earthing Technology for Domestic, Industrial LT & HT Users
• Very simple, totally maintenance free i.e. Fit & Forget Installation
• Corrosion Proof, Weather Proof, Water resistant, Maintenance Free, Highly Durable, Life Saving & Cost Effective Solution for the lifetime
• Proper earthing ensures longer life
• Fluctuation of OHMIC value is least (Within Safe Limits)

Click Image for Comparison Between Traditional Method of Earthing & Safe Earthing

We offer clients a wide range of enclosures to choose from. Our enclosures have achieved ingress rating of IP67 and NEMA 4X and 6,6P. Available under the Fibox brand, these enclosures provide designers with over 1000 choices for packaging electrical and electronics equipment operating in Hostile, harsh & demanding environments of establishments like:

• Industrial plants
• Unprotected out door areas
• Marine engineering applications
• Areas with increased safety E Ex e II like mining and petrochemical plants.

These Comply with:

• Our enclosures comply with EN 60529 (IEC 529) and UL 50 and UL 508.
• Many third party listings including UL, CSA, KEMA, FIMCO, DNV, and LR.

In addition most of these products are rated for use in Hazardous area. Further the materials used in FIBOX standard enclosures fulfill the requirement of RoHS directives.