Success Udyog Private Limited

ASTRO BLASTING HELMET Model: 02-800 SERIES Astro Helmet is a low cost alternative for workers in abrasive blasting applications. It is NIOSH approved with high pressure and low pressure air sources. Breathing air evenly flows down the front of the helmet minimizing lens fogging and cooling the user. The helmet is a super lightweight abrasion resistant polyethylene shell. Available with flow control valve or low pressure adapter. FEATURES: Large inner and outer flat rectangular lens for wide field of vision PVC window frame gasket provides seal Lens frame with molded hinged and secured with an easy to grab rubber latch, even with gloved hand Flexible breathing tube 28 nylon cape to protect from rebounding abrasive Removable hard hat type suspension for easy adjustment Lightweight (3.4 lbs) for better comfort 5 3/8 hanging strap for easy cleaning and storage DOWNTUBE: Non-toxic PVC inner and outer material Located behind the helmet 33 heavy duty flexible breathing tube INNER LENS: High impact Polycarbonate (meets ANSI Z.87.1-03+) 7 5/16 X 5 3/16 Replacement inner lens available (PN 02-810, 10 pkg.) OUTER LENS: Clear Co-polyester 6 15/16 X 4 3/4 Replacement tear off lens available (PN 02-8 16, 50 pkg.) Replacement outer lens available (PN 02-811, 50 pkg.)

Features: Explosion proof lamp with DGMS approval 4V, 12Ah Chargeable battery with charger 4Volts, 1A Tungstun Krypton bulb 10 hours use in single charge

NOVA 2000 BLASTING HELMET Model: NV2000 SERIES The NV2000 is NIOSH approved with a flow control valve and air temperature controller for abrasive blasting applications. Our tough polyethylene helmet shell meets penetration requirements of ANSI Z89.1. It is also U.V. stabilized and abrasion resistant. Breathing air evenly flows throughout the helmet minimizing lens fogging and cooling the user. The lightweight helmet padding ensures comfortable and proper fit for workers. FEATURES: Wrap around wide angle inner and outer lens for wide field of vision Removable lens frame with secured strong latch The rubber window frame gasket provides a seal from dust Meets NIOSH requirements for sound levels inside the helmet Multi-layered sound dampening foam minimizes noise Weight is 4.3 lbs which makes for better comfort 28 nylon cape to protect from rebounding abrasive 5 3/8 hanging strap on top of helmet for easy storage and cleaning DOWNTUBE: Non-toxic PVC inner and outer material 33 heavy duty abrasion resistant flexible breathing tube Located behind the helmet allowing it to be out of the way Replacement breathing tube assembly (Part# NV2021) INNER LENS: High impact Polycarbonate (meets ANSI Z.87.1-03+) 8 11/16 X 4 3/4 Replacement inner lens available (PN NV2018, 10 pkg.) OUTER LENS: Clear co-polyester 10 5/8 X 5 1/8 Replacement lens peel offs (PN NV2017, 50 pkg.) Replacement outer lens available (PN NV203 1, 50 pkg.) NIOSH APPROVAL: Approval No. TC-19C-363 (Use only Allegro approved airlines.)

8" PLASTIC COM-PAX-IAL BLOWER (220V / 50 Hz) WITH OR WITHOUT CANISTER Models: 9533-E, 9533-15E, 9533-25E CONSTRUCTION: Lightweight, corrosion, UV, and chemical resistant polyethylene housing & canister assembly Durable construction design and super quiet Available as blower (9533-E) only or complete unit with storage canister and 15' ducting (9533-15E) or 25' ducting (9533-25E) Canister attaches to intake or output side of blower for suction or ventilation Bottom enclosure to protect electrical components Built in On/Off switch Polypropylene nine blade fan with steel/powder coated grill Carry handle molded into blower and canister housing SPECIFICATIONS: MOTOR: HP: 1/3 HP 220V AC, 50 Hz, Single Amperage: 1.9 Amp. Max RPM: 2800 (Loaded at 220 Volts, 50 Hz) Cord: 20 AWG Model 9533-15E Switch: ON/OFF switch DUCTING: (Included on 9533-15E and 9533-25E models) Single-Ply Lightweight Vinyl/polyester, PVC coated 150 F Temp resistant Non-Collapsible Retractable design Class 1 hard drawn spring steel wire helix, ASTM 227 Specs Yellow with black wear-strip and integrated nylon attachment strap

VENTILATION BLOWER, EXPLOSION PROOF CENTRIFUGAL FAN, 220V / 50 Hz Models: 9503-E, 9503-15E, 9503-25E CONSTRUCTION: 8' Flange on intake and exhaust side Tough safety orange Polyethylene construction One piece housing with integrated handle 16 gauge, black powder coated steel base Steel handle Aluminum blower wheel with aluminum hub Zinc plated grill Equipped with four (4) rubber feet

VENTURI BLOWERS The Venturi Blowers from Allegro are a perfect solution to moving air in refineries, utility and power plants, shipyards, paper and pulp plants, the marine and steel industry and manhole operations. Anywhere where fumes that may be poisonous, explosive or hazardous from process towers, tanks, large pipes or confined space need to be removed. You can cool workers in elevated temperature conditions, or cool heavy equipment that may be in danger of overheating or that needs to be cooled in order to work on, with a blast of directed air. Our line of high-performance, lightweight Venturi Blowers help to create a safe, healthy working environment leading to greater efficiency and productivity. Welding fumes, hot air, gases and smoke can all be removed quickly and easily. And our Venturi Blowers can also be used to move fresh air into a manhole. Models: 9518-03S, 9518-03, 9518-06, 9518-08 OPERATION Compressed air or saturated steam is the power source for our Venturi Blower line. Small volumes of high velocity air (from the compressed air source) run through the casting and out the nozzle jets, creating a venturi action or pulling action that creates large volumes of air through the venturi and out the air diffuser. A 1/2 hose with a crows foot connection is recommended from your air supply source to the side inlet connection. The compressor size required can be determined by checking the chart on air consumed at various inlet pressures. Operate this Venturi Blower on air or steam lines limited to 140 psi.

VORTEX CLIMATE CONTROL TUBE Model: 4000-01 Vortex tubes are an effective, low cost solution to respiratory cooling needs. With no moving parts, a vortex tube spins compressed air to separate the air into cold and hot streams by forcing the compressed air through a generation chamber which spins the air centrifugally along the inner walls at a high rate of speed toward the control valve. The air temperature controller adjusts the amount of air to the helmet and adjusts air temp 25 degrees cooler than the ambient air for use in hot environments. AIR QUALITY: The respirators air source must be supplied at all times with clean breathable air, Grade D or better as defined by the Compressed Gas Association. (Commodity Specification G-7. 1) CONSTRUCTION: Body: Plastic Fitting: 1/4 Quick-connect (Rectus style) stainless steel Belt: Nylon PSI Range: 60-85 psi Weight: 1.3 lbs Color: Blue body with black control valve BENEFITS: Lightweight for better comfort Provides continuous cool air delivery No moving parts Easy to adjust control valve, even with gloved hands Will cool compressed air by 25 Belt adjust to fit up to 50-inch waist NIOSH APPROVAL: NIOSH approved to supply a continuous flow of cool compressed air to the Astro or Nova 2000 supplied air respirator (approval number TC-19C-363)( USE ONLY NIOSH APPROVED AIRLINE HOSE)

AIRLINE FILTER Model: 3000-01 The Airline Filter is designed to remove oil mist, water vapor and particulates down to 0.5 microns from breathing grade compressed air. The Airline filter is placed inline between the breathing air source and the respirator airline hose, air enters the filter through the inlet port. Once the air has been filtered, moisture is removed and drained through a drain valve located at the bottom of the airline filter. The Airline Filter meets OSHA regulation 1910.94 (6) (i), requiring a trap and carbon filter to be installed and it also meets 1910.94 (6) (ii) by providing a pressure reducing valve to reduce pressure to the requirements of supplied air respirators. CONSTRUCTION: Body: Heavy gauge steel, powder coated (Blue) Impact and corrosion resistant Valve: Balanced valve design, Brass/ Nitrile Relief Valve: Brass, spring loaded (External) Inlet 1 NPT Fitting: Rectus Quick-Connect Max Temp: 140 F (60 C) Max Pressure: 125 psi Pressure Gauge: Analog, 0-150 psi Legs: ABS Plastic (Can be used to mount the airline filter on a wall or as a stand) FILTER CARTRIDGE: (Replaceable, P/N 3100-02) Large capacity filter cartridge provides better and longer filtration. Made of felt, polyester wadding, quality activated carbon, and quality activated alumina material, this filter helps trap water, oil, dust particles, and odors from the compressed air source.

HIGH PRESSURE AIRLINE HOSE Models: 9101-25B, 9101-50B, 9101-100B Airline hose is NIOSH approved, when used with Allegro Supplied Air Hood respirators. Manufactured with Hansen quick-connect couplers. CONSTRUCTION: Inner polyvinyl chloride Reinforced braided polyester yarn Outer black polyvinyl chloride 80 Shore A-Durometer SPECIFICATIONS: Temperature Range: -20F to 150 F Inner Diameter: 3/8 (0.594) Outer Diameter: 19/32 (.0594) Maximum Pressure: 185 psi @70 F AIR FITTINGS: Manufacturer: Hansen Design: Industrial Interchange Type: Quick-Connect Air Fitting Size nominal Coupler: 1100 Series, chrome plated brass (P/N 9700-74A) Plug: 10 Series, steel (P/N 8400-04A) AVAILABLE LENGTHS: 25 Feet Part No: 9101-25B 50 Feet Part No: 9101-50B 100 Feet Part No: 9101-100B

Success compact is a folding rope ladder made from strong aluminium rungs and steel wire rope. It is strong, fire proof, light weight, compact and easy to carry. success compact is very simple to use. Remove the fixing clamp by pressing the ladder sections together. Unfold the rungs. Anchor the ladder to a firm support and the ladder is ready to use. success compact comes with anchorage hooks that can be anchored to any firm support and can be used any where in many applications like fire escape, vessel entry, maintenance & cleaning work, mountaineering etc. the maximum load capacity of entire ladder is 300 kg / 4 persons and each rung is 150 kg/2 persons.

Features: 14 bright white LED gives 90000 med light (with all LEDs ON) 3 AAA cells operated. (10 hrs or more battery life with all LEDs ON) Adjustable elastic headband can also be mounted on safety helmet ABS plastic body, rain proof & shock resistanct Angle adjustment 4 mode side press switch for different LED operations (4,8,14,14 Flashing LED) LED life span 100,000 hours or more

Microgard 1500 : one piece suit made from high quality 3 layer anti static fabric offers protection from airborne solid particulate matter and limited protection against a light spray of liquid chemicals.