Measuring Instruments

Technical Details :

• Most Smooth slides .
• Hardened steel construction
• 4 Way Measurement Inside, Outside, Depth, Step
• With Fine adjustment and Locking Screw
• Very Stable Microprocessor 

Specifications:

Size in mm /inch	Least Count in mm
150/6”	0.02/0.001”
200/8”	0.02/0.001”
300/12”	0.02/0.001”
Guarantee	6 Months without abuse
Packing	Plastic Box
Calibration	Inhouse provided free of cost

Packing : Plastic Box with Cover Sleev

Calibartion : In House

Outside micrometer sometimes known as a micrometer screw gauge, is a device used widely in mechanical engineering and machining as well as most mechanical trades for precision measurement. Colloquially the word micrometer is often shortened to mike . The Micrometer is used to measure any work pace which solid in nature. There are mechanical, dial type, digit counter type and digimatic versions available.

We have also all kind of special application micrometers . Please do get in touch with us for any special requirements .


Application :

Micrometer is used to measure short lengths accurately


Technical Details :

Printed marking on the vernier scale
Carbide tipped measuring Faces
Blue metallic finish frame
With Locking Clamp and ratchet stop
Least Count : 0.001mm
Coolant Proof Model ( IP65 )
With Friction Thimbile


Specifications:

Roughness	Ra, Rz, Ry, Rq, Rt, Rp, Rmax, Rv, R3z, RS, RSm, RSk, Rmr,parameters
Assessed profiles	Roughness profile (R) Primary profile (P)
Unit	mm, inch
Display resolution	0.01 m
Data output	RS232
Measuring Range	Ra: 0.025~12.5 m
Cutoff length (L)	0.25mm / 0.8mm / 2.5mm/Auto
Evaluation length	1~5L (selectable)
Tracing length	(1~5)L + 2L (selectable)
Digital filter	RC, PC-RC, Gauss, D-P
Max. driving length	17.5mm/0.71inch
Min. driving length	1.3mm/0.051inch
Pick-up	Standard pickup TS100, inductive, Diamond stylus radius 5?m, angle of stylus 90°

Packing: Plastic Box Packing

Calibration: Inhouse

Application :

Is a dial indicator type gauge that will measure a range of holes directly. The tool consists of

• A range of interchangeable anvil pieces (for the telescopic part of the gauge) that transfer their movement to a freely moving rod.
• A body that includes a transfer mechanism (the movable rod)
• A dial indicator mounted at the remote end (to measure the axial movement of the rod)

This combination allows the bore size to be accurately read from the instrument with the minimum of effort. The fixed end of the anvil piece has pressure fingers on either side of it that assist correct placement in the bore, this reduces the reliance on feel by the operator, as required when using the telescopic gauge.


Product Details :

• Inserting interchangable type anvils (Above 35mm)
• Ceramic Point anvils which are wear resistant are also available
• Digimatic Indicator Also Available
• With Dial Gauge Protection cover
• Bore Gauge with 1µ Lease count also available

Specifications:

Size in mm	Least Count in mm
06-10	0.01 / 0.001
10-18	0.01/ 0.001
18-35	0.01/0.001
35-60	0.01/0.001
50-160	0.01/0.001
160-250	0.01/0.001
250-400	0.01/0.001

A height gauge is a measuring device used either for determining the height of something, or for repetitious marking of items to be worked on.

These measuring tools are used in metalworking or metrology to either set or measure vertical distances; the pointer is sharpened to allow it to act as a scriber and assist in marking out work pieces.

We offer , three types , Mechanical with Fine Adjustment , Dial Type , Digimatic Versions .


Technical Details :

• Single Beam Type
• Stainless Steel Beam with Dark Markings
• Horse Shoe base gives extra stability
• With Driving Wheels for easier movement
• Carbide Tipped Scriber with Lock and Clamp
• Buttons : On/Off, Inch / MM, ABS

Surface plate is a solid, flat plate used as the main horizontal reference plane for precision inspection, marking out (layout), and tooling setup. The surface plate is often used as the baseline for all measurements to the workpiece, therefore one primary surface is finished extremely flat with accuracy up to  grade 0 plate. Surface plates are a very common tool in the manufacturing industry and are often permanently attached to robotic type inspection devices such as a coordinate-measuring machine.

 

These plates are manufacture from closed grains granite, free from flows and fissures 
Application : Tool Room, Gauging and inspection
Advantage : Rust free, corrosion free, non glaring surface, high precision, smooth action
Grade : 0, with NABL calibration certificate

Size in MM	Thickness In MM
400x400	60
630x400	80
630x630	80
1000x630	150
1000x1000	150
1000x1600	200
1000x2000	200
1600x2000	200

Application :

• Used to check angles of work peices accuratley
• It is also used for marking on the work peices
• Other Angle Masuring : Bevel protactor, Inclinometer , Angle Gauge Box , Slip Gauge Box

Technical Details :

• Accuratley machined surface for precise readings
• Consists of protactor head, centre head , square head and scale
• Protactor head has spirit level for accurate reading
• Can measure 180 Degrees on either side