a) EOT / HOT – Single and Double Girder Cranes : Suenpro designs and manufactures class 2, 3 as per IS 3177 / IS 807 specifications.
1. Single Girder EOT / HOT Crane is manufactured in Beam type with auxiliary girder or Preferably Fabricated Box type with all sturdy mechanisms, drive unit assemblies etc.

Note-
1) Hoists at customer’s choice also provides semi EOT Crane.
2) SWL – 500 KG to 10000kg
3) Span – 4 mtr to 20 mtr 2. Double Girder – EOT / HOT Cranes are efficiently designed and manufactured from high quality steel.

All steel constructed box Type Girders, High strength wheels, assemblies, single or double drive units assemblies. A strong and sturdy crab trolleys with single or with double hoisting mechanism with standard motors, reducing gears brakes components etc. are used for optimum good and smooth results.

Note-
1) SWL – 1000 kg to 30,000 kg
2) Span – 6 mtrs to 30 mtrs

b) Jib Cranes : Jib cranes are especially used for loading unloading of jobs on machines, as well as for loading & unloading of trucks etc. Column mounted JIB cranes and wall mounted Bracket JIB cranes are manufactured to cover the effective are of 180º & 360º radially. Suenpro designs & manufactures such JIB cranes sturdily and for smooth working to suit specific clients requirements.

c) Gantry Cranes : Suenpro designs & manufactures strong & sturdy structured support single/double Grinder Gantry cranes as per class to IS 3177 / IS 807 with all hoist & drive mechanisms for efficient & smooth operations running on rails installed at ground level.

We design and supply a good range of cane handling devices as per standard specifications of National Federation of Co.op sugar factories for 1250 TCD to 5000 TCD.

a) Cane Unloader : Designed and supplied as per IS : Class 14 specifications, 20 lift per hour, for Truck and Cart, sling bar type, 2/3 motions, hoisting speed 9 M/mins, Gross and Long travel 15 mtrs/mins, with crane duty motors, helical / warm gearboxes, Electro hydro thrust type brake with all accessories for CAPACITY – 3MT TO 7.5 MT.

b) Feeder Table : Design & Installation as per std. Specifications, size 6m x 7m having 3º angle available also 4m x 5m (clients requirement). Duly completed with chain 40 T to 60 T breaking load, sprockets, gears, gearbox, motor, VFD etc.

c) Cane Carrier : Design & Installation as per Std specification, width sizes 1524mm, 1700mm etc. suitable to TCD. Feeding length 30m, inclination of 18ºC & 8º for Leveler & fibrizer. Complete with chain 150 P, slats, sprockets motors, gear box, open gear pair etc.

We offer revolving Jib crane that have simple yet robust mechanism. In such cranes the horizontally extended load beam rigidly attached to the upper end of a vertically extended mast. The lower part of the mast is extended inside a hollow pipe and associated with a base that can revolve. Roller bearings are properly secured to the mast and revolve around the circumference of the pipe. Our Jib cranes require minimum floor area for its operation and it can be mounted on any existing structure. It is ideal in assorted industries for heavy machine loading, material loading/unloading, light assembly work and others.

a) ^{Cane Chopper} : Design manufacture supply of cane chopper rotor assembly width of 1524 mm / 1700 mm on forged steel shaft, cost steel hubs, swing dia 1600 mm, knives with chopping plate 45 to 48 HRC supported on double row self aligning spherical roller brgs, complete with plummer blocks, CI fly wheel, motor, gear box, hood etc.

b) Cane Cutter / Leveler : Designed manufacture supply of cutter/ leveler rotor assembly suitable of 60”, 66” 72” carrier width. Cast steel hubs, forged steel 40 C 8 shaft, swing dia of 1600 mm minimum. Knives with satellited cutting edge Hardness 45-48 , supported on Drsasr Brg. Complete with plummer blocks, CI flywheel, motor, gear box, hood etc.

c) Swing type fibrizer : Designed, manufacture, supply installation of swing. Type fibrizer rotor assembly swing dia. 1600 mm to 2100 mm. Every fibrizer is designed to perform the best PI upto 85%, forged steel shaft, 32-50 mm hub thk, round / triangular hubs, swing type hammers 90-136 nos.hard faced. Anvil plate 160º coverage , stationery, feeding plate, supported on Sadrsr Brgs, pedestal, complete with all accessories etc. Installed No. Of fibrizer for Khandsarz units also.

a) Juice Heaters, Evaporators, Vapor Cell, Semi Kestner :
1. High velocity vertical tubular juice heaters designed of multiple circulation type of 115% juice on cane at respective crushing rate of various heating surface. Tube plate, cover plate, with opening device for cover plate, tubes of 55/ Bras 45 mm 07 with juice, water, steam, water connection & valves & Pipeline.
2. All vapor cell, semi kartner, evaporators will be of efficiency designed with respective Heating surfaces for tubes of brass/ SS – 45 mm OD. Suitable thk of MS plates for calandria. Bodies, top cone, bottom saucer, down take and efficient entertainment catcher. Vapor space of 2 times in vapor cell & evaporator & 2.5 times in last body. Bodies complete in all respect of Conn, valves, pipings structure and staging etc.
B)Sulphiters : Design, manufacture supply and installation of continuous juice & syrup sulphiters suitably designed for crushing rate of 56 TCH TO 225 TCH with 115% juice, retention time 7 mins, sufficient juice / syrup column nt, gas distribution arrangement, reaction and correction tank, stack gas recovery tower, , receiving tank, stirring, arrangement with suitable drive having around 16 RPM for juice sulphitor. SO2 gas absorption arrangement for syrup Sulphiters. All construction of MS adequate thk, all necessary conns, fittings etc. will complete the said unit.


c) Low Head Vacuum Pans : The vacuum pans efficiently designed for Low head rapid boiling calandria type normal strike capacity of 40 T- 60 T. H.S will be designed so HS to M3 not less than 6.6. Tubes brass / SS-OD 102 mm. Adequate vapor space. All MS having sufficient thk for calandria, tube plate, body, top cone, bottom saucer, down take etc. ample capacity discharge valve, various pipe of vapor, syrup, molasses, water, exhaust etc. with all fittings. Valves, connections, gauges, samplers, sight light glasses etc.

Heat Exchanger :  We manufacture heat exchangers that are widely used in space heating, refrigeration, air conditioning, power plants, chemical plants, petrochemical plants, petroleum refineries, and natural gas processing.

a) Crystallizers : All air cooled, water cooled & Vacuum Crystallizers of batch type horizontal crystallizers designed & manufactured all steel constructed with sufficient thickness for trough body, end plates, stiffeners, discharge gate etc. with efficient stirring arrangement of sturdy cones for air cooled and sturdy heat exchange unit for water cooled with drive motor, reduction gear, to give striker speed of not more than 60 RPH.

b) Magma Mixer / Mol Tank :
1. Magma mixer of steel construction of std sizes and specification is designed with drive, motor GB/ Planetary unit, beaters open gear units, stuffing box etc.
2. Milk of lime tank of desired capacity with stirring arrangement and sturdy manufactured complete with connections, drive valves etc.

c) Cranes:
Class 2 type cranes of single girder, double girder confirming to TS 3177 / 807. EOT/HOT type 3 motions, of various capacities from IMT to 20MT FOR Milling house and Power House (Hot type).

We manufacture Belt conveyors that are user-friendly and reliable. Our range of conveyors offer automated operations easing off pressure from the user. We offer varieties of conveyors used in different industries. We design and fabricate various conveyors according to the client specification or needs. The conveyor find their usage in the filed of grinding, crushing and pulverizing in minerals, chemicals, pharmaceuticals, building materials, flour industries and agro industries.

a) Rake Carriers with Donelly Chute : Rake type conveyor of steel construction width to accommodate 1500 mm to 1700 mm rakes, suitable length and feeding height of 3 mtrs. Suitable length and feeding height of 3 mtrs. Suitable designed Donnelly chute above top roller. Rakes fabricated type, fixed on 229 mm P block type forged chain & sprockets. Suitable runners, structure , head end tail end shafts, GM Bush brgs, drive sprocket chain motor, gear box , variable speed drive, and tightening arrangements. Speed of carrier will be 10 meters/ min.to 25 meters/ minute.

b) Under Feed, TRPF Rollers : Cast iron shell hot shrunk fitted grooved inter meshing type or M.S. fabricated toothed type under feed rollers and TRPF roller with shaft of 35C8, B.G.M. bush bearings, pinions, set etc.

c) Cush Cush Conveyor : U shaped double scroll screw type conveyor, sturdy designed for ultimate capacity. Screw flight dia of 600 Ø and suitable length, discharge perforated bottom for juice drainage. Complete with motor, gearbox, gearpair, to run not more than 40 RPM.

d) Bagasse Elevator, Return Bagasse, Cross Bagasse Carrier : All carriers and elevators suitably designed to the desired TCD manufactured in All steel construction, sturdy troughs, braced, heavy supporting structures, fabricated rakes or slats, fixed on 150 mm chain, 40,000 kgs breaking strength, suitable sprockets, motor, gear box, drive chain & sprockets, GM / Roller bearings, Idler shaft assembly, platform & staircase etc.a complete unit.