We offer high quality NC Servo Roll Feeders. These are offered with the following features:

• High-precision feeding: Aiming at the arrival of hi-tech industry, it is controlled by computer closed-circuit feedback system, so that the precision can maintain within 0.03 mm
  
• Phase-style feeding function: It can input 20 groups for different feeding length, each group provides punching for 999 times to satisfy the processing and production of special products (option). • It can input 3 phases manual speed, which can let used operate more easily and feed materials more accurately
  
• High- efficiency release device: It can set up release angle quickly, only can single of, and adjusted feed thickness can be done
• Feeding length setting: Input feed length on the controller panel directly
  
• Feeding Unit: The roll adopts middle-hollwo style, being light and with low inertia for electroplate. The surface hardness HRC is 60° and hard chrome plated
  

Click on the image for specifications

Suku Feeder eliminates all troubles, as they are fitted onto the die set. Because of their very, competitive price, it is economical to fit one feeder on each die. In fact you just need to mount the feeder on the die set and adjust the feeding stroke. You only need a few minutes for set up, and you will have automatic units ready for use at all times. We also offer these as per the customers' requirements & specifications. In these, coil stock can be fed in any direction or angle at any time during the machine cycle. A single feed can push or pull through long or short progressions. A variety of stock widths and thicknesses can be fed at different speeds and feed lengths. Two or more strips can be simultaneously fed by the same feed.

We offer the following Construction Features:

I. Material Quality

• All items which are subjected to sliding motion or shocks, are extra hardened or hard-chrome plated. The cylinder liners are in hardened brass.
  

II. Stroke of Feed Accuracy

• Very strong front and rear shock-absorbers guarantee a very high stoke or feed accuracy of _0.01 is assured.
  

III. Thick Sliding Plates

• It is possible to realize special guides on the sliding plates for the feeding of special profiles. On request, hardened plated or plates in plastic strips or magnetic strips can be supplied.
  

IV. Sliding Guide Rods

• Strong sliding guides, hardened and ground, are used in our feeders, The feed pitch adjustment is very easy. It is enough to shift the rear stop block into the different groves on the guides.

Introducing the new age feeding system to fulfill the demands of creasing the production and decreasing the recurring expenses in sheet metal component making industry. Suku High Speed Gripper feeds have the perfect solution to problems of feeding medium and high speed press, due to its simple adjustment system and the precision of its movements and remarkable performance.

Salient Features:

1. Accurate and easy pitch adjustment.
2. Accuracy to the tume of + 25 microns, obtainable with piloting.
3. The Grippers are made out of carbide of give life ling service.
4. All rotating parts are fitted with antifriction bearings to give long life and reduced maintenance.
5. High speed of upto 650 strokes per minute.
6. Roller Cam for Pilot release setting, which gives great precision in adjustment of the fixed gripper.
7. Micrometer pitch setting arrangement provided.
8. Silent in operation - no air required.
9. Trouble free in operation.
10. Mechanically synchronized with the press thus avoiding feeding mismatch at high speeds.
11. Drive from press crankshaft to the Feeder is fitted with an overload safety coupling.
12. Hardened gears provided in the right angle gear box for long life.
13. Stock buckling guides for thin material.
14. Easy setting for strip thickness.

Type Model	Width	Stroke Length	Thickness	Speed max stroke /min
SUKU 5A	10-130	5-130	0.1-2.5	650
SUKU 8A	15-205	5-200	0.1-2.5	500
SUKU 12A	32-310	10-310	0.2-3.0	400
SUKU 16A	32-410	10-400	0.2-3.0	300

We offer high quality Uncoilers & Levellers, which are also offered by us, as per our clients' requirements & specifications.

These are offered with the following features:

• Integrated with uncoiler and straightener, save volume, suitable for board processing. These automatically adjust the feeding time according to the output speed.
  
• All rolls are made of bearing steel, have all been quenched, hard-chrome plated and grinded with mim HRC60.
  
• Use Japanese electromagnetic contact and electric parts, long service life
  
• A step less variable speed control is used normal and high speed operation, control by modern frequency converters, keep pace with straightening, stable feeding
  
• Leveler inclines appropriately to reduce feeding loop distance
  
• Constructed with highly rigid structure and designed with a powerful motorized feeder 

Click on the image for specification

We offer S-Type Straighteners.

These are offered with the following features:

• It is able to exactly match the Double End Coil Cradle, Easy operations. It can completely match with high speed press. the use with roll feeder machine effect will be better
  
• "S" type loop guiding system is equipped with optical signals. PC and frequency converter and can work synchronizing with the press
  
• The frequency converter adjusts speed. SPM up to 6 m / min
  

Click on the image for specifications