sumip doghouse motor canopies are already in use since last many years. Sumip has now developed an improved version, "skintight" version which helps in improving cooling effect on the motor & does not need base support.
Sumip FRP Fan cowls available for all frame size of motors. FRP frames are light weight, corrosion resistant, and hence long life. Almost 100% air intake foes through fins, thus improving cooling.
Trefoil clamps are used for high voltage single core or higher sizes cables where the current rating is high & 3 core cables are not available.
Sumip Trefoil Clamps are used for laying single core cables in Trefoil touching formation which helps to maintain magnetic symmetry thereby avoiding electromagnetic heating and loss of current.
Sumip Trefoil clamps have been molded from virgin glassfiber filled material.
Sumip Type TRE 28 Trefoil clamp has been tested satisfactorily at CPRI to withstand 50 KA short circuit fault current with spacing between Trefoil clamps kept at one meter distance.
In this design heavy duty Hot deep Galvanized Mild steel base / High grade aluminum casting base is bonded fiberglass shaft & the base is with polyurethane coat to match pole color.
If require we can supply hot dip galvanized anchor bolts with shrouds also.
Finishing of pole
Sumip poles are finished & coated Polyurethane coating. The UV inhibitors are added into the resin & coated for maximum life.
Before being coated smooth finish poles undergo several finishing step to achieve their smooth surface.
The pole is polished before applying finish coat of polyurethane coating.
Our shafts coated, before the final manufacturing step to add cap, tenons, bases etc. to make them for use up to the customer satisfaction.
Sumip make fiberglass light poles are constructed of polyester/epoxy resin system& fiberglass woven rowing with more then 65% of the reinforcing fiberglass in axial vertical plane which increases desired rigidity & axial strength.
The pole shaft is manufactured by winding process, the winding is applied under tension and at low angel for high axial strength. Additional circular winding is provided for compression strength. This allow the flexibility of material placement, which make it the clear choice for this type of structure.
Filament winding is accomplished on a machine, which winds glass fiber on a mandrel in a prescribed pattern to form a desired finished shape. A Programmable Logic Control [PLC] is used in a close loop control circuit to control machine movements. This system allows for placement to the right amount of fiberglass at the right place & orientation.
The result of this is one piece, composite pole with a uniform surface along its entire length. The same is coated with specially formulated polyurethane coating with UV inhibitor to protect the pole & to keep them look good & give long life.
This poles are in conformity with ANSI 136.20-1990 & ASTM UG23.
Sumip fiberglass light poles are constructed of Polyester/Epoxy resin systems & fiberglass woven rowing with more than 65% of the reinforcing fiberglass in the axial vertical plane which increases desired rigidity & axial strength.
Application
Light Poles
Street Lighting
Highway Lighting
Docks / Water Fronts
Offshore Platform
Corrosive Area/ Chemical Plants
Sumip light poles and round tapered poles are available with two base options, direct Burial type & Anchor base type.
Sumip Ladder & Perforated type Cable Tray provides reliable cable support in corrosive application. Both Polyester & Vinyl ester resin systems are available & all components incorporating U.V. Stabilizer & a surfacing veil to resist corrosive atmosphere.
From power plants to fertilizer industries, paper mills to refineries to laboratories, sound electrical design requires an adaptable cable support system that is reliable. Above all durability & resistance to corrosion lead to lower costs during the life of installation.
The Pre assembled fittings are available in all types of tray. The fittings are assembled with the help of Stainless Steel 316 fasteners unless & other wise specified.Rungs are connected with a mechanical lock.
Type Description FBIVD 30/45* Direct Inside Bend FBOVD 30/45* Direct Outside Bend FBIVR 45* Inside Vertical Radius Bend FBOVR 45* Outside Vertical Radius Bend F90BIVR 90* Inside Vertical Radius Bend F90BOVR 90* Outside Vertical Radius Bend FTHR Horizontal Radius Tee FCHR Horizontal Radius Cross FRS Straight Reducer FRL (left reducer) FRR (right reducer) Left or Right Reducer
we make safe ladders all our ladders are designed and made to meet the applicable standards & requirements of the national (is) as well as international standards like american national standards institute (ansi), osha etc.
osha has set minimum requirement with respect to the use of ladders in business and industry.
variety of ansi safety codes are available depending on material and type of ladders. The applicable ansi codes are as follows.
Sumip luminaries are available in totally enclosed GRP housing suitable for use in non hazardous, dusty, humid & corrosive atmosphere prevailing in Chemical, Fertilizer, Cement, Rayon Plants, and also Industries/Power Plants located in coastal areas.
Construction The luminaire housing is Hot Press Molded Glass Reinforced Plastic (GRP).
Glass Wellglass - Heat resistance glass is provided with synthetic rubber gasket. Highbay/ Mediumbay - Teflon glass with rubber gasket provided. Retaining frame/ Wire guard Strong stainless steel wire guard is provided to hold & protect the well glass. Holder Ceramic ES or BC lamp holders are provided as per customer requirement of high grade quality. Ballast & Igniter & Capacitor For Integral type luminaries Heavy Duty Copper Wound Ballast, Capacitor & Igniter where ever applicable, are fitted right above the lamp holder assembly. Entries One no 3/4" BS conduit entry is provided for incoming cable with Brass/ Polyamide cable Gland with check nut. Hardware All hardware provided are SS 316. Suspension FRP Coated Eye Bolt is provided on top with good quality grommet to absorb the vibration. Alternatively SS 316 Clamps can also be provided.
Sumip offers fiberglass as well as stainless steel connector plates designed to connect between straight sections & fittings.
Splice plates & fasteners are sold separately and are not provided as standard supply along with straight section.
Size of the bolt use for connector plates are 8mm x 20mm Hex Bolt with Nut, 2 Plain Washer & 1 spring washer. This bolt sets are available in SS304 & SS316 quality.
Global Communication.Com Leading manufacturer of led bulb, led cabinet light, led spot light, led tubes, led panel light, led decorative light, led dance floor light, led down light series, led wall lamp series, led underwater light series.
Kidz Abode Supplier of night lamps such as hanging night lamps, designer night lamps, decorative night lamps, stylish night lamps, trendy night lamps and fancy night lamps, aeroplane lights and tank lights.
Processing...
