We offer heatless compressed air dryers which are the simplest form of desiccant type gas or air dryer (drier). Our range is perfect for achieving a dew point of -40°C for compressed air systems and other gas and air dryer (drier) applications. The process by which our dryers work involves wet incoming compressed air after passing through pre filter passes through the slide piston valve assembly and is directed towards chamber I where the compressed air passes upward through the desiccant. Compressed Air drying takes place by adsorption. Dry Compressed air from chamber I then passes through the Check valve assembly and then through the after-filter to the application or work area.

Salient Features:

• Extensive Mimic display
• Energy saving purge economizer
• Filters Auto drain Valves are integral
• 45 Sales & Service outlets across the Nation

For Detail Information Click On The Download

We offer refrigerated compressed air dryers used for the treatment of compressed air and making it completely moisture free. This moisture-free compressed air finds usage in many industries and their different processes. Our range of dryers is known for its superior quality and high performance. The use of eco-friendly refrigerants makes our range environment-friendly. Our entire range is checked on strict quality parameters to make sure they deliver the best possible performance. The dryers are available in various specifications and variants in the market.

 

Salient Features:

• Stainless steel brazed plate heat exchangers. These are zero leak helium tested and offer extremely long life. Trident brings this to you this as a standard.
• Easy read bar indicator electronic controller.
• Helium Tested Stainless Steel plate heat exchanger
• Microprocessor Controller
• Maintains Constant Dewpoint
• Large condenser for high ambient temperatures
• 45 Sales & Service outlets across the Nation

 

Our sub micron filters effectively eliminate moisture, oil and dirt from the compressed air. Its drainage system filters the air effectively, thus providing clean air, which enhance the performance of respective machines. Our sub micron filters regularly remove the contaminants. Two types of filters offered by us are coalescers and interceptors. The coalescing filters manufactured with borosilicate micro glass fibers are used to filter liquid like oil and water. The interceptor filters are utilized for particle removal. Oil vapors are filtered by activated carbon filters.

 

Salient Features

 

• Automatic drain valve
• Particles up to 0.01 microns are filtered.
• Very low pressure drop, 1 PSI for dry media and 2-3 PSI for wet media
• Status indicator
• Different coalescer grade for various applications
• Maximum oil carries over of 0.008 PPM w/w

For Detail Information Click On The Download

We offer automatic drain valves which effectively condensate water, oil and moisture ensuring absolutely no loss of compressed air and hence saving enormous energy. Our timer based valves are provided for different voltage with adjustable on-time and off-time operation. The range can easily withstand dirty and harsh outdoor conditions. Our valves are suitable for all compressed air systems like receivers, dryers and heat exchangers and are highly efficient and reliable. Our range is available in 1000, 2000 and 3000 LCD series.

Salient Features

• Proven Reliability
• Digital electronic circuitry for time control
• Water proof enclosures
• Ideal for outdoor installations
• Proven for durability
• Zero Air Loss
• Noise Free
• Condensate Sensing Type
• Design Patented

Apart from the above, our qualitative range provides the following advantage:

• The electronic level control ensures proper draining of condensate and avoids unnecessary loss of air.
• All the functions of the valve are accurately indicated by the LED display.
• Test switch (or) manual drain allows function test at anytime.
• Intelligent Controller detects valve, probe failure and acts accordingly.
• Noise free, as air is not discharged.

UP Series 5-15 HP

We source and supply rotary screw compressors which are recognized for its superlative performance among our distinguished clients. The compressors are distributed for “"Ingersoll rand" and provide continuous supply of the compressed air under adverse conditions and is designed to facilitate the effective ventilation. Our range which is powered by new concept, consumes minimal power.

Salient Features:

• Ultimate Reliability
• Maximum Uptime
• Ultimate Efficiency
• More Air for money
• Smart, Energy Efficient Controls
• Ultimate Flexibility
• Compact Footprint Design
• Installation Close to Point-of-use
• Ultimate Productivity
• Closely Maintained Pressure
• Innovative
• High Efficiency Integrated

 

Our compressors are preferred by our clients because of the following technical specialties:

• Whisper Quiet Operation
• Dual Control Operation
• Simple Diagnostics
• Poly-V Belt Drive
• Advanced Cooling
• Generous Serviceability

We are an authorized dealer of Infinity rotary screw compressor. Our range is designed and developed as per the specifications of our clients. Our durable and highly efficient compressors are in wide demand across the globe. Complying with the accepted industrial standards, these are offered at industry leading prices.

 

Salient Features:

 

• Low sound levels
• Advanced cooling
• Dual control operation
• Poly V belt drive
• Simple diagnostic
• Generous serviceability
• Ultra plus coolant
• Hot box cool box design

 

We offer VSD or Nirvana Variable Speed Drive Systems which are used to modify the electro pump frequency in order to grant the requested delivery maintaining a constant pressure. The setting is possible to a pressure sensor and a flow sensor connected to the inverter. The constant pressure makes our system energy saving and excellent performances.

Features:

• Soft start
• Adjustable speed variation
• Adjustable minimum and maximum speed limits

 

We offer a wide range of reciprocating air compressors, which are ideal for most of the industrial applications such as automotive service and body shop, fleet maintenance, machine shops, production and manufacturing lines, construction wood working, car washes, maintenance & repair shops. Specially designed using the latest technology, these are fully balanced and  simple in operation. Procured from reliable vendors, these are at par with international quality standards.

• Maximum alt power
• More delivered an (cfm) providing the power to do the job right and in less time
• 100% continuous duly even for the toughest applications
• 175 psi maximum operating pressure

Durable

• Built to last! Durable cast iron construction
• Extended pump lite! For yea rs of trouble free service
• Industrial quality design

Reliable

• Designed and produced by ingersoll-Rand, the world leader in air compressor manufacturing, sales and service
• Precision engineered quality components

Two-Stage Air Cooled Industrial Air Compressor
Technical Specifications

Standard Scope of Supply (for receiver mounted air compressors) 

• Compressor with flywheel
• Suction air filler
• Interstage safety valve
• Motor slide rails. V-belts. motor pulley
• Belt Guard
• ASSC of CSC capacity regulation

Air receiver with following :

• Safety./ Service / Drain value
• Pressure gauge

Options
Drive	Motor or Engine
Receiver	Vertical, loose supply
After-cooler	Air or Water-cooled
Filters	For oil removal
Dryers	For moisture removal
Dram	Automatic type
Switch	Low Oil level
Also available	Baseplate mourned. Portable mourning. Custom built packages

• Two-Stage Design : Provides 175 PSIG operation.
• Valve & Spring : From the Finest grade of imported steel. Lesser carbon build up.
• Removable cylinders : Easy to repair. Provides even 360⁰ cooling. Eliminates hot spots.
• Finned copper Intercooler: Runs cool even in the most demanding conditions.
• Splash Lubrication : Simple and reliable. Does not require oil pump, so it is inexpensive and easy to maintain.
• Connecting Rod : Fewer wearing parts.
• Crankshaft; Precision-balanced to run smoothly and quietly.

For More Specification click on Download

The ingersoll Rand industrial star range Oil-Free Compressor Packages are self contained compressed air power plants, engineered into an unusually compact skid mounted unit that has everything you need, to generate dependable low-cost air power. There is nothing more to buy or install. The completely assembled unit with interconnecting piping and cabling is factory tested and eliminates costly start-up delays due to elaborate installation and commissioning at site, incorrectly placed accessories, defective switches, lost components etc. The compact unit is easy to install, occupies less floor space and is equipped so as to offer a single point water inlet/ outlet connection and air outlet connection.

Available in Oil-Free construction, these packages are economical to use on account of its lower installation costs, lower maintenance as well as operating costs. The standard package includes a compressor, Vee belt drive & belt guard, electric motor, vertical after cooler & air receiver with standard fittings, starter and control panel with adequate safety shutdown systems, necessary piping & hardware, and with optional air dryer and compressed air filters.

 

Our range of desiccant dryers are extensively used in various cleaning applications of paint spray booths, tool, valve, cylinder protection, food packaging machine, auto garage, textile & garments and many others. Our range of desiccant dryer provides total cleaning solution for lubricated as well as non-lubricated compressed air. Provided with advanced technological features, these are highly acknowledged for efficiency and uninterrupted performance.

Dryspell

• Microprocessor Controller
• Prerfilter rating 0.3 microns (coalescer)
• Shuttte valve for Low Pressure drop
• AH Aluminium resist curidatinn & scale formation
• Dewpoint better than -400 C
• Design Patented

Desiccant Dryer offers total cleaning solution for lubricated as well as non-lubricated compressed Air,

Principle of Operation

Drying Cycle; Moist air from the compressor is sent through the  coalescing filter.   Here water & oil coalesces, gets purged through the auto drain valve.

The relatively clean at with water vapour passes through the aluminium drying tower filled desiccant gets completely dried (upto – 400C dew point) and then passes through a built in after filler The desiccant fines from the towers are completely removed and dean dry air is let out through the outlet port for use.

Regeneration Cycle: During the regeneration cycle. The sudden depressurisation brings out water molecules trapped m the Desiccant pores to the surface of the beads, A small portion dry compressed air  from the drying TOWER then passes Over the desiccant through the regeneration orifice built in the Top Block. This results in complete regeneration of the Discount.

Typical Application

• Paint spray booths
• Tool, Valve, Cylinder protection
• Food packaging machine
• Auto Garage
• Textile & Garments
• SPM
• Instrumentation

Specifications

• Maximum Working Pressure - 16 kg / cm2
• Air Inlet Condition - Maximum Fluid Temperature 450C
• Pre-filter rating - 0.3 Microns (Coalescer)
• Cycle Time - 4 Minutes
• Regeneration Volume - 10%
• Air Outlet Conditions - Dry air at  -400C  Dew Point
• Operating Voltage - 85 - 265 V 50 / 60 hz l Ph

We supply a high quality range of vortex filter that is procured from some of the well known vendors of the industry. These filters are extensively used in various industrial applications for removing water, oil and solid particles from the air. Our range is compact in size, light weight and also appreciated for its high performance. Standard compliant, these are also quality checked at our facility to ensure maximum satisfaction to the clients. 

Vortex Filter - VXD 2

• Removes water, oil and solid particles
• Compact and light weight
• No Electricity used
• All aluminium resist oxidation and scale formation
• Large surge chamber

The Concept

Filter eliminates 100% water In liquid phase Air is termed as Dry air as long as there is no water in liquid condition Vortex Filter removes and evaporates- water thereby assuring 100% liquid water free air i.e. dry air. This process does not lower the Dew point. Any cooling after the Vortex Filter will result in condensation. Hence dryers dryers are to be used near the end use machines (i.e. less than 4m)

How it Works

In the first stage coalescence takes place as wet and dirty air is made to spin and tumble through an indepth-bed made of Stainless Steer line wire. Moisture in the air condense into droplets by centrifugal force which along with other contaminations travel down the wire to the bottom of the filter cartridge and on to a honeycomb structure. Water subsequently drains out.

In the second stage air enters a lightly wound filter element made up of highly absorbent long staple cotton backed by SS wires for mechanical strength. When the streamlined flow of air is intercepted by the filter elements it breaks down, into small vortices called Micro vortices. This phenomenon is known as Vortex Shedding Small micro vortices are formed with a vacuum where water particles  are trapped. Then the water particles disintegrate and evaporate.

Oil droplets coalesce in the first stage, while oil vapour Is absorbed by the second stage elements, effectively removing 99% of Oil content, A filtration efficiency of 100% & is achieved for solid particles of 5 micron size and 50% for 1 micron size.

Specifications

• Model- VXD 2
• Max. Flow - 25 cfm
• May. Working pressure - 15 kg/cm2
• End connection - 1/2 ESP
• Size (H x B x D) mm - 200 x 100 x 50
• Weight - 1.25 Kg
• Air Inlet Condition - Max. Fluid Temp 70°C
• Material of construction - Extruded Aluminum
• Coating - Powder coated
• Sealing - Polyurethane & Nitrile   Rubber

Installation

For optimum results the Vortex Filter should be installed closer than 4m to die air operated equipment.

Maintenance

First Stage cartridge : The SS wires remain unaffected by liquids. Only solid particles accumulate and clog the filter. REPIACE EVER/ 5000 HOURS.

Second Stage Cartridge : Oil vapour absorbed in the second stage reduces the oil absorbing capability of the second stage, it must be replaced when saturated by oil. 

We have with us a range of PET star that is specifically designed for the plastic blow molding industry. These are also used in air separation, air brake testing, soot blowing, metal forming, down hole air drilling and various other industrial applications. Known for their quality and reliability, these are in compliance with ASME and NEC requirements. Further, we provide these in proper packaging and at industry leading prices.

PET Star is designed for the Plastic Blow Molding Industry. Quality with Reliability

• Continuous Duty, Three Stage, Double Acting, Water Cooled Design
• 100% Oil-free air
  
• Constructed to ASME, and NEC requirements
  
• Advanced composite ring materials
  
• Stainless steel plate valves
  
• Self adjusting V-Belt tensioning system
  
• Stainless steel air piping with SAO O-ring fittings

Minimize Customer Cost

• High efficiency full-load operation
• Low unloaded power due to capacity control system
• EPACT efficient motor standard
  
• Intellisys™ microprocessor control panel monitors and records pressure and temperatures, operating hours, and percent loaded
• Concrete filled subbase to minimize foundation required
• Forklift access and lifting eyes, for ease of installation

Other Applications

• Air Separation
  
• Air Brake Testing
  
• Soot Blowing
  
• Metal Forming
  
• Down Hole Air Drilling
  
• High Pressure Instrument Air
  
• Autoclaving Process
  
• Engine Starting
  
• High Pressure Industrial Air

For More Details Download PDF