Road Safety

Our clients can avail from us high quality Solar Road Studs that are known for providing clearly visible traffic guidance in all weather conditions. These are energized by the sun; the SRS automatically begin to flash when night falls or with the onset of inclement weather. The highly effective bright yellow flashing LEDs instantly catches the attention of drivers - much earlier than conventional road studs, which further avoids or navigate danger zones. These can also be used for marking traffic hazards such as median strips, provide toll booth lane control at bridges and tunnels, and for traffic guidance on sharp corners in fog prone areas. Moreover, these studs have 5 years life span, and we offer a one year limited warranty on the fixture.

Our USPs:

• Solar powered LED doesn’t require external power sources
• LEDs along with standard retro-reflective materials provide guidance at night and during inclement weather
• LEDs light continuously for approximately 7 hours after one hour of sunlight. With a complete charge, the SRS will flash for 8 days (12 hours a day)
• Available with blue, green, red, or yellow LEDs
• Tough aluminum and stainless steel construction is resistant to the weather and traffic wear.
• Low maintenance (cleaning with standard road sweeper)
• Test results have shown a reduction of accidents by 70%
• No further energy costs after installation
• Low maintenance (cleaning with standard road sweepers)
• Automatically starts to flash when night falls

Technical Data:

• Size : 5.2 x 4.8 x .78 inches (132x122x20 mm)
• Weight : 17 ounces (500 g)
• Shaft Diameter: Ø 1.1 inches (28 mm)

Installation Instructions for the Solar Road Stud:

Mark the points of installation (areas in tunnels and buildings or under bridges are not suitable)

Distance between studs:

• Approximately 16-20 feet (5-6m) for roadways and freeways
• Approximately 6-10 feet (2-3m) for dangerous entrances and exits
• Approximately 1.6-6.5 feet (0.5-2m) for entrances and exits of hospitals and parking garages

Drill the holes:

• Diameter: 1.18-1.25" (30-32mm)
• Depth: 2.3-2.5" (60-65mm)
• Clean the drilling hole
• Fill up the drilling hole with 2-component glue (e.g. Hi-Bond) and install the stud into the adhesive paste
• It is advises not to use high-temperature glue
• Ensure that the glue has dried completely and the stud has settled before the lane is reopened to traffic

We offer our clients with solar blinkers that are the LED based Solar Blinker Unit. In these units the LED's are operated in a multi-channel series/parallel matrix. The multiplexed pulses are maneuvered at high frequency, high intensity and low duty cycle to obtain maximum visible brightness at minimum power consumption.

Specifications & Features:

• Mono / Poly Crystalline Solar Cell Modules
• Sealed Maintenance Free Battery
• Inbuilt Control Card & solid state Blinker
• Solar Charge Regulator @ 90% charge efficiency
• 12 or 24 hours Operation
• Automatic On/Off Dusk to Dawn Operation
• Working Voltage: 12, 24 Volts D.C
• 2 to 4 days System Autonomy
• 200mm / 300 mm Round Light Source
• Cluster of High Intensity Ultra Bright LEDs
• Red, Green, Amber LED Colors
• Symbols like Pedestrian Cross, Arrows
• Visibility 500 meters, Good even during Hazy Weather
• Automatic Intensity Control during Day & Night time
• Single / Double / Triple Aspect Models

Duty Cycle 50%

• 20 to 90 flashes per minutes as desired
• Signal head ASPECT
• Polycarbonate Die molded Body conforming to international standard as applicable for 200, 300 mm Dia signals respectively. 300mm DIA Signal Aspect for mounting LED kits complete Unit

Protections

• Completely shock less system
• Short Circuit protected
• Automatic Restoration
• Battery Deep Discharge
• Battery Overcharge

Applications

• Interconnecting Road Junctions on National & State Highways
• Industrial, School, Hospital, Market, Office Zones in Cities

We bring forth for our clients Solar Traffic Signals. These LED Traffic Signals & Blinkers possess led based signal lights, instead of conventional incandescent lamps. Widely appreciated for consuming 90% less energy, these signals are practically viable to operate Traffic signals. These signals are completely maintenance free on eco friendly Solar Power and without electricity connections. Tested on strict Indian Standards, these can be custom designed as per the specifications of our clients.