We offer 300 series planetary drives that has compact as well as powerful units. These drives are ideally suited for various severe duty applications where there is a lot of shock loadings and impact. These drives are made of high quality mounting, gear layout, output shaft and motor interface. The different features come for each 16 finely spaced frame sizes, spanning over the 1.000 – 450.000 Nm torque range. The technical specifications are given below:

Torque range	1000 to 450.000 Nm
Mechanical rating (n1 = 1400 min-1)	Upto 450 kW
Gear ratios	1:3,4 to 5.000
Gear unit versions	In line-Right angle (with bevel gear pair Gleason)
Output configuration	Foot and flange mounted Output shaft: solid with key, splined hollow Hollow shaft with shrink disc
Gear unit Input configurations	IEC and Nema motor adaptors Solid input Shaft
Applicable AC motors	Compact motors and brake motors - M series
	"IEC motors and brake motors and brake motors - M series" IEC motors and brake motors – BN series Single and dual speed motors
Main brake features	DC and AC supply Fast braking and / or brake releasing through SB, NBR, SBR optional electronic devices
Main motor options	Thermistors and thermostats sensors Servo ventilation Line driver and push – pull incremental encoder

Our array of F series shaft mounted gearmotors is easier and neater solution for installation. These gearmotors are light in weight as well as high performing dependable drive used in different kinds of material handling applications. The technical specifications include:

Torque range	140 Nm ... 14.000 Nm
Mechanical rating (n1 = 1400 min-1)	0,17 kW ... 125 kW
Gear ratios	6,4 ... 2099
Output configuration	Keyed hollow shaft FACE="Verdana, sans-serif">Keyed hollow shaft – two bore options per size, Keyless shrink disc fitting , Plug-in solid output shaft as an option
Input configuration	IEC normalized motor adaptors Solid input shaft
Applicable AC motors	Integral motors and brake motors – M series IEC-normalised motors and brake motors – BN series Single and dual speed motors
Main brake features	DC and AC supply Faster brake engage / disengage through electronically controlled AC / DC rectifier type SB, NBR, SBR (options)
Main motor options	Thermistors and thermostats sensors Separate supply forced ventilation Line driver and push – pull incremental encoder

High in efficiency and long lasting, our range of A series helical bevel gearmotors that is widely used by a large number of clients. Assuring higher durability and cost effective rates, our range of gearmotors have created a huge market for themselves. The technical specifications include:

Torque range	150 Nm ... 14.000 Nm
Mechanical rating (n1 = 1400 min-1)	0,22 kW > 0,22 kW … 150 kW
Gear ratios	5,4 … 1715
Output configuration	Foot and shaft mount – two bore options per size , Keyless shrink disc fitting , Metric or inch series solid output shaft
Input configuration	IEC normalized motor adaptors , Metric or inch series solid input shaft
Applicable AC motors	Integral motors and brake motors – M series , IEC-normalised motors and brake motors – BN series , Single and dual speed motors
Main brake features	DC and AC supply ,Faster brake engage / disengage through electronically controlled AC / DC rectifier type SB, NBR, SBR (options)
Main motor options	Thermistors and thermostats sensors Separate supply forced ventilation , Line driver and push – pull incremental encoder

We supply and export a wide range of HDP series parallel shaft gear units that has high torque ratings and close progression of gear ratios. These units also have numerous mounting options offered with compact dimensions that helps in engineering of any application. High quality and rigid monobloc housing as well as precision made gears used helps in assuring the clients of completely quiet as well as vibration-free operation.

Transmissible torque	4650 MN2 16550 Nm
Gear ratios	7,1 iN 112 with progression = 1,12
Mounting	Foot, flange, shaft mounting
Input	Solid shaft, direct motor mounting, lantern housing with flexible coupling
Output shaft	Solid (single & double extension), keyed hollow, shrink disc
Options	Fan coooling, cooling coil, heaters
	Backstop
	Non-contactting labyrinth seals
	Heavy duty bearings
	Temperature and vibration sensors
	Drywell
	Torque arm
	Forced lubrication

Our AS series helical gearmotors are applicable for various in-line drive applications. Our products are easy to install with foot or flange mounting are possible in any mounting position. Our AS series in-line helical gearmotors come in the following specifications:

Torque range	30 Nm ... 7.200 Nm
Rated power	(n1 = 1400 min-1)
Gear ratios	in=4,5 ... 185
Output configurations	Solid keyed shaft
Input configurations	IEC motor mounting provision Solid input shaft
Applicable motors	IEC-normalised motors, upto 45 kW Single and dual speed version
Main brake features	DC and AC supply Faster braking and / or brake releasing through SB, NBR, SBR optional electronic devices
Main motor options	Thermistors and thermostats sensors
	Forced ventilation
	Line driver and push ats sensors
	Forced ventilation
	Line driver and push – pull incremental encoder

We bring for our clients a wide range of VF & W series worm gears. Based on state-of-the-art technology, our products come with several mounting options, shaft configurations and motor interfaces. These VF & W series worm gears are also available with helical-worm, double-worm versions, with or without torque limiter. Our range of VF & W series worm gears come in the following specifications:

Torque range	13 Nm 13 Nm … 7.100 Nm
Mechanical rating (n1 = 1400 min-1)	0,04 kW … 75 kW
Gear ratios	7 … 10.000
Output configuration	Keyed hollow shaft
	Plug-in solid output shaft
	Torque limiter as an option
Input configuration	IEC normalized motor adaptors
	Solid input shaft
Applicable AC motors	Integral motors and brake motors – M series
	IEC-normalised motors and brake motors – BN series
	Single and dual speed motors
Main brake features	DC and AC supply
	Faster brake engage / disengage through electronically
	controlled AC / DC rectifier type SB, NBR, SBR (options)
Main motor options	Thermistors and thermostats sensors
	Separate supply forced ventilation
	Line driver and push – pull incremental encoder

A Bonfiglioli product, our range of RAP series parallel shaft speed reducers is used in various heavy duty applications. Used in either motorized configuration or as speed reducer version, these products are widely demanded by our clients across the globe. These reducers are also offered with several mounting options with single or double projecting shaft, splined hollow or the shrink disc coupling.

Optimized design for efficient and fullest conversion of rated electrical in put into vibration power.

Features:

•Increased centrifugal force values and greater spread all across the range.
•High ratio of centrifugal force to machine weight, a feature of great value for mechanical stability of driven machinery.
•High ratio of force to overall size representing most compact design
•Path breaking finned construction for highly enhanced heat dissipation, to the extent of 1000 %, giving Sinex motor vibrators an unmatched electrical overload capacity.
•Thoroughly done product design for low cost manufacturing benefits of which being passed on to customers, making Sinex most competitive amongst motor vibrators of their class of quality.
•Sturdy yet light frame constructed in shock resistant ductile metals of most appropriate grades duly heat treated and seasoned for strength and geometrical stability.
•Large holes for easy lifting, shifting and installation

Pneumatic Vibrators are essentially ingenious inversion of well known "Peristaltic" pump. Here fluid drives a rotor, compressed air spinning a ball at high speed, which produces "Centrifugal Force", a rotating vector, to impart vibrations to the object on which vibrator is mounted.

Applications :

•Unlocking bottles, cans, caps and similar objects on or in their conveyors, tracks and feed cages.
•Vibrating funnels to hasten material transfer in to narrow necked pharma & cosmetic containers.
•Dislodge sticking & clinging material, a necessity in weigh hoppers and bagging / packing machines.
•Imparting vibrations to moulds & containers for material compaction, densification and settling.
•Promoting material flow down the feed chutes, ducts, small bins & hoppers by aiding gravity.
•Driving small screens for separation & grading and vibratory test & material settling / densification tables.
•And many others that one's ingenuity can visualize.

We use the technology of high tech digital frequency conversion, the induction cooker controlled by the micro computer heats up the food resulting from the induction whirlpool of the frequency magnetic field. With the power on, the electric current of frequency conversion will generate magnetic field in the induction cooker, as soon as the magnetic force line in the magnetic field touched the iron boiler, it will let out countless small whirlpool which can hear the boiler and the food in it.