Compression Testing Machines

We present our clients Compression Testing Machine Elec. Oper that is used for determination of compressive strength of a concrete cube that is made from fresh concrete cast in a standard test mould. The value of compressive strength is used to assess if the batch that the concrete cube represents is as per the required compressive strength. Both manufacturing of cube as well as curing should both be closely controlled as the cube is crushed and stated at constant speed till it sustain further increase in load. Then the strength is derived by a calculation using the maximum load and cube dimensions.

It is an electric cum hand operated for compression tests on concrete specimens up to 20cm dia and 30 cm in height. The machine meets the essential requirements of various Indian, British & American standards for compression tests. Loading Unit : The hydraulic jack of 2000 kN capacity is fixed to base. The upper platen has got a self aligning action and is attached to a screw which passes through the cross head and can be raised for lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centering pin. Loading is accomplished by the upward movement of the lower platen. Pumping Unit : The motorized pumping unit which is housed in an elegant console is of double plunger type and is driven by 3 phase 440 volts 50 cycles electric motor. The pumping unit is separate unit connected to the jack by means of a steel connecting tube. A junction box is suitably fixed to connect the motor to the mains through a push button starter. The pumping unit is fitted with gauges. A maximum pointer is provided to facilitate taking of the reading after failure of the specimen. The pressure gauges are fixed on the pumping unit at an angle for easy readability.The machine is fitted with a hand wheel control which enables the rate of application of load to be varied. The machine is also equipped with facilities for hand pumping in case of power failure. The electric pumping unit is fixed with a micro-switch off the motor automatically as the load on the machine approaches the rated capacity. Relays are also incorporated in the pumping unit so that in the case of break-down of power supply, the motor will stop and would not-re-start unless starting switch is operated.Other Capacity : 10 Tons, 25 Tons, 50 Tons, 100 Tons, 150 Tons, 200 Tons, 300 Tons

The digital compression testing machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The design expressive of simplicity, both of construction and operation, makes the machine easy to use and maintain. The unit is compact, making it useful for site and Laboratory applications. The digital machines are provided with a pace rate controller, to enable maintain a constant of loading.

We make available to our clients Compression Testing Machine H.O. that is useful for field laboratories or mobile testing laboratories or vans that frequently changes site or location. It is generally useful where constant and consistent electric power is mostly not available. The load is manually applied and observed on the pressure gauge. The pressure gauge has a maximum load indicator that stand still even after the specimen is under test crushes and has to be manually set to zero.

We provide our valued clients Vibrating Table that produces better concrete molds and cylinders by removing entrapped air. It evenly distributes concrete inside the molds that eradicates the problem of bug holes as well as air bubbles. Moreover, we offer these tables in varied sizes and specifications to suit varied working applications of the clients.