Electro Therapy

Features :

* Highly user-friendly Control Panel

* Universal & Economical Unit

* Easy-to-operate design

* SDC Facility available

* Five types of Currents (Galvanic, Interrupted Galvanic, Faradic, Surge Faradic & Tens)

Technical Specification: Galvanic Output :

Low ripple D.C. continuous adjustable from 0 to 145 volts

Interrupted Galvanic

Frequency : 1, 2, 3, 5, 10, 30, 50, 60, 100 Hz

Pulse Width : 0.01, 0.03, .10, .30, .40, 1, 3, 10, 30, 100, 300 Milli Seconds

Faradic :-

* 1 Milli Second pulsed width and 60 Hz Frequency. Amplitude continuously adjustable from 0 to 145 volts

Surge Faradic :-

Contraction Period : Contraction period adjustable from 1 to 9 seconds

Rest Period : Rest period adjustable from 1 to 9 seconds

Tens: Pulse width 400 micro sec. & frequency 50 Hz

Standard Accessories:

*One pair plate electrode

*One pair Velcro Straps

*One point electrode

Easy portable treatment

Three output selections ( Tens, Interrupted Galvanic, Surge Faradic ) Good quality cover.

Input Supply : 230 V AC, 50HzSIZE : L 6” x W 5.5” x H 2” WEIGHT : 1.5 Kg. Approx

Technical Specifications :

• TNS

Pulse width : 400 micro sec.

Frequency : 50Hz

• IG

Pulse width : 100 mili sec.

Frequency : 1 per sec.

SF : 1 to 9 sec. duration.

Standard Accessories :

• One pair plate electrode

• One pair Velcro Straps

• One point electrode

Features :

* With Russian current.

* Universal & Economic Unit.

* Highly user friendly control panel.

* Complete computerized unit.

Technical Specifications :

Selection

*Russian Current : 2500Hz Carrier freq.

*Medium Frequency : 4 KHz, 2 KHz

*Base : 0 to 100 Hz

*Sweep : 0 to 150 Hz

Form : Triangular 6/6 Sec | Trapezoidal 1/5 Sec | Rectangular 1/1 Sec

Mode : (4pv) 450 Four pole vector Interferential | (4pv) 900 Four pole Vector Interferential | (4p) Four pole Interferential Therapy | (2p) Two pole Bipolar Interferential Therapy

Output Mode : Pads

Intensity : Control variable output of 0-60 mA

Timer : 1-60 minute timer

Buzzer : Audio buzzer at the end of the treatment time

Standard Accessories :

* Four electrodes wire

* Two size rubber pads

* Best quality Velcro straps

* Gel

Features:

• Imported

• Light Weight

• Pocket Model

• Two Channel

• Digital Tens

• Works on three AA battery cells

• It utilizes solid state circuit to provide maximum Reliability and Stability.

Special Features:

 

• Six different stimulation modes. Tapping(I), Tapping (II), Kneading, Press, Vibration & Program.

• Diffrent modes and Itensity can be used simultaneously.

• LCD display & digital operation.

• Intensity adjustable to 0 - 9.

• wo channel output.

• Preset 10 minutes Timer.

• Large buttons for easy operation.

• Maximum output-200 Hz for more severe pain.

Long Wave Diathermy

Long wave is much better and superior modality for relieving pain, compared to Shortwave (SWD) and Ultrasound.

Few points about of Long wave which makes it superior to SWD and Ultrasound Therapy :

• Long wave works at 1Mhz, where as SWD works at 27.12Mhz, since Long wave has less frequency, there will be minimal loss of energy.

• SWD produces heat due to molecular friction, which causes tissue destruction.

• Long wave has power output of just 25 watts, where as SWD generates 250 to 1000 watts of power.

• Unlike SWD, Long wave will not produce any interference with other equipments.

• Long wave can be used, with patients having metal implants.

• Heat generated due to Long wave, will remain for 45mins.

• Long wave has deep penetration of 40mm.

• Unlike Ultrasound, Long wave will not have any irritation to boney parts.

• Most of the energy remains in high density tissue like ligaments tendons.

• Highly portable approx 4 kgs.

Clinical results prove that Long wave is much better modality than Shortwave and Ultrasound.

Fisio Ther 2 Plus is our equipment for electro therapy, delivering low and medium frequency currents with 2 independent outputs

The unit is supplied with a 6' colour Display with touch-screen function, which allow us to select any protocols also by anatomical region selection, by its wave forms, by several branches and by choosing the protocols form the full list.

A well advanced electro therapy device, with its library on line, which will supply us information on every working protocols, and will provide us with the precise visual positioning of the electrodes on the area to be treated.

Therapy as a moment of relax Thanks to the music files loaded on our equipment, today the therapy is mhours pleasant.

Supplied Wave Forms:

• Galvanic - Continuous, Interrupted, MF

• Diadynamic - Monophase, Biphase, Sync.Monophase, Sync.Diphase, CP, LP

• Pulse - Rectangular, Triangular, Traebert

• Faradic - Rectangular, Triangular, Neodynamic

• Tens - Burst, Random, Modulated, Al Tens

• Biphasic - Symmetric, Asymmetric

• Interfrential - Quadripolar, Isoplanar, Vector, Bipolar, Stimulating, Russian Current ( kotz )

• Esponential

• Iontophoresis

• Micro Currents

• High Voltage HVPC

• H Wave

• APS

• Creation of rheobase & cronaxie I/T curve

Technical specifications:

• Power supply - 230 Vca, 50-60 Hz ± 10% Maximum mains power absorption 30 VA

• Double delay type (T) mains fuse protection - 315mA-T

• Backlit LCD display to view and check the operating parameters - Graphic LCD graphic 6' colour

• Touch screen Programmable treatment time - 1-99 minutes

• Operation - Constant voltage

• Creation of the Rheobase and Cronaxie - Constant Current

• Intensity/Time curve - Yes

• Interferential currents - Upto 4,000 HZ

• High Voltage currents - 500 V

• Micro-currents - Yes

• Continuous currents Ionthophoresis - Limited to 50 mA

• Diadynamic currents - Limited to 70 mA

• Peak currents with other waveforms - 120 mA

• Peak power - 100 V

• Output channels independent - 2

• Automatic and/or manual polarity inversion - Yes

• Stored protocols - 250

• Storable protocols in the internal memory - 200

• Storable I/T curve diagnoses - 100

• Protocols in sequence that can be stored - 10

• Storable protocols in Smart Card - 100 programs

• 100 I/T curve diagnose

• 20 protocols in sequence

• Ultrasound Connection - Yes

• Vacuumed Connection - Yes

• External connection of Voice Unit - Yes

• Software updates - Yes

• Weight - 4,4 Kg

Accessories supplied:

• Power cable: 1

• User's manual: 1

• Fuses: 2 x 315 mA-T

• Electrodes 60x80 mm: 4

• Electrode sponges 60x80 mm: 4

• Electrodes 50x50 mm: 4

• Electrode sponges 50x50 mm: 4

2 Channel Electro Therapy equipment delivering Low and Medium Frequency Current

Technical Specification :

Thanks to its advanced technology this device can now be continually updated and will be able to carry out functions that become available in the future.

By using a smart-card or an Internet connection, this computer derived technology means that you can easily update the unit by adding functions, protocols and anything else our research and development department makes available.

The outputs are completely independent and mean that different work protocols can be provided.

Each output module includes a micro controller that carries out a real time check of the output current and voltage and will signal any inconsistencies between the value entered and the value actually being supplied. It also ensures complete safety at all times.

The system checks the wear and tear of the cables and output electrodes and will signal when it is time to replace them.

Supplied Wave Forms:

• Galvanic - Continuous, Interrupted, MF

• Diadynamic - Monophase, Biphase, Sync.Monophase, Sync.Diphase, CP, LP

• Pulse - Rectangular, Triangular, Traberet

• Faradic - Rectangular, Triangular, Neodynamic

• Tens - Burst Form, Random, Modulated, Al Tens

• Biphasic - Symmetric, Asymmetric

• Interfrential - Quadripolar, Isoplanar, Vectorial, Bipolar, Stimulating, Russian Current ( kotz )

Technical Features:

• Power Supply - 230 Vca 50-60 Hz, ± 10%

• Maximum Mains Power Absorption - 30 VA

• Double delay type (T) mains fuse protection - 2 x 630 mA-T

• Backlit LCD Display to view and check the

  operating parameters - Graphics bw 320 x 240

DPI

• Programmable Treatment Time - 1 - 99 Minutes

• Operation - Constant Voltage

  Constant Current

• Creation of the Rheobase and Chronaxie I/TCurve - Yes

• Interferential Currents - Upto 4,000 Hz

• Ionphoresis Direct Currents - Limited to 50 mA

• Diadynamic Currents - Limited to 70 mA

• Peak currents with other Wave Forms - 120mA

• Peak Power - 100 V

• Independent Output Channels - 2

• Alarm " Incorrect Output Load " - Yes

• Automatic and / or manual polarity inversion - Yes

• Stored Protocols - 100

• Storable Protocols in the internal memory - 200

• Storable I/T curve diagnose - 100

• Protocols in sequence that can be stored - 10

• Sortable Protocols in Smart Card - 80

(50 Programs)

(20 I/T curve Diagnose)

(10 Protocols in sequence)

• Ultrasound Connection - Yes

• Vacuum Connection - Yes

• Possibility to Update Software - Yes

• External Connection Vocal Unit - Yes

• Weight : 4.4 Kg

   

   

  Unit Comes with the following Accessories:

• Power Cable - 1

• User's Manual - 1

• Fuses - 2 x 3 1 5 m A-T

2 channel electrotherapy equipment delivering Low Frequency Current.

Technical Specification :

Thanks to its advanced technology this device can now be continually updated and will be able to carry out functions that become available in the future.

By using a smart-card or an Internet connection, this computer derived technology means that you can easily update the unit by adding functions, protocols and anything else our research and development department makes available.

The outputs are completely independent and mean that different work protocols can be provided.

Each output module includes a microcontroller that carries out a real time check of the output current and voltage and will signal any inconsistencies between the value entered and the value actually being supplied. It also ensures complete safety at all times.

The system checks the wear and tear of the cables and output electrodes and will signal when it is time to replace them.

FisioTher 2 L machines run on low frequency current, visualises the Intensity/Time curve, the Reobase and the Cronaxie on a 6 inch LCD graphic TFT display screen. A convenient encoder allows for quick selection of the current and/or protocol to be emitted and accesses a library of 100 programmes, as well as enabling the operator to create and memorise up to 400 different simple or sequential work cycles.

Electrotherapy device with 2 independent outputs, delivering low frequency currents.

FisioTher L Basic have a graphic display, which clearly shows the most important information.

The device has 20 stoured protocols and internal memory that can store up to 10 new work protocols.

The unit is supplied with operating software in five languages: Italian, English, French, German and Spanish.

Supplied Wave Forms

• Galvanic - Continuous, Interrupted, MF

• Diadynamic - Monophase, Biphase, Sync.Monophase, Sync. Diphase, CP, LP

• Pulse - Rectangular, Triangular, Traberet

• Faradic - Rectangular, Triangular, Neodynamic

• Tens - Burst Form, Random, Modulated, Al Tens

• Biphasic - Symmetric, Asymmetric

Technical Features:

• Power Supply - 230 Vca 50-60 Hz, ± 10%

• Maximum Mains Power Absorption - 3 0 V A

• Double delay type (T) mains fuse protection - 2 x 630 mA-T

• Backlit LCD Display to view and check the

operating parameters - Graphics bw 240 x 64

DPI

• Programmable Treatment Time - 1 - 99 Minutes

• Operation - Constant Voltage

  Constant Current

• Interferential Currents - Upto 4,000 Hz

• Ionphoresis Direct Currents - Limited to 30 mA

• Diadynamic Currents - Limited to 50 mA

• Peak currents with other Wave Forms - 100mA

• Peak Power - 100 V

• Independent Output Channels - 2

• Alarm " Incorrect Output Load " - Yes

• Stored Protocols - 20

• Storable Protocols in the internal memory - 10

• Ultrasound Connection - Yes

• Vaccum Connection - Yes

• Weight - 4.4 Kg

Unit Comes with the following Accessories :

• Power Cable - 1

• User's Manual - 1

• Fuses - 2 x 315mA-T

• Electrodes 60 x 80 mm - 4

• Sponges for Electrodes 60 x 80 mm - 4

   

• Electrodes 50 x 50 mm - 4

• Sponges for Electrodes 50 x 50 mm - 4

• Elastic Band 1000 mm - 2

• Elastic Band 6 0 0 m m - 2

Electrotherapy device with 2 independent outputs, delivering low and medium frequency currents.

FisioTher LM Basic have a graphic display, which clearly shows the most important information.

The device has 20 sthoursd protocols and internal memory that can sthours up to 10 new work protocols.

The unit is supplied with operating software in five languages: Italian, English, French, German and Spanish.

Supplied Wave Forms

• Galvanic - Continuous, Interrupted, MF

• Diadynamic - Monophase, Biphase, Sync. Monophase, Sync. Diphase, CP, LP

• Pulse - Rectangular, Triangular, Traberet

• Faradic - Rectangular, Triangular, Neodynamic

• Tens - Burst, Random, Modulated

• Biphasic - Symmetric, Asymmetric

• Interfrential - Classic, Isoplanar Vectorial, Russian Current ( kotz ) Technical Features

• Power Supply - 230 Vca 50-60 Hz, ± 10%

• Maximum Mains Power Absorption - 30 VA

• Double delay type (T) mains fuse protection - 2 x 630 mA-T

• Backlit LCD Display to view and check the

  operating parameters - Graphics bw 240 x 64

DPI

• Programmable Treatment Time - 1 - 99 Minutes

• Operation - Constant Voltage

Constant Current

• Interferential Currents - Upto 4,000 Hz

• Ionphoresis Direct Currents - Limited to 30 mA

• Diadynamic Currents - Limited to 50 mA

• Peak currents with other Wave Forms - 100mA

• Peak Power - 100 V

• Independent Output Channels - 2

• Alarm " Incorrect Output Load " - Yes

• Stored Protocols - 20

• Storable Protocols in the internal memory - 10

• Ultrasound Connection - Yes

• Vacuum Connection - Yes

• Weight - 4.4 Kg

Unit Comes with the following Accessories :

• Power Cable - 1

• User's Manual - 1

• Fuses - 2 x 315mA-T

• Electrodes 60 x 80 mm - 4

• Sponges for Electrodes 60 x 80 mm - 4

• Electrodes 50 x 50 mm - 4

• Sponges for Electrodes 50 x 50 mm - 4

• Elastic Band 1000 mm - 2

• Elastic Band 600 mm : 2

Fisio-Sonic Plus is our equipment for ultrasound, for a multifrequency treatment (1-2-3 Mhz), with 2 independent outputs.The unit is supplied with a 6' colour Display, with touch-screen function, whichallow us to select any protocols also by anatomical region election, with the precise visual positioning of the ultrasound head on the area to be treated. A well advanced ultrasound, with a library on line, which will supply us information on every working protocols.

Therapy as a moment of relax

Thanks to the music files loaded on our equipment, today the therapy is mhours pleasant. The probe has been designed and engineered to obtain the best possible results as well as protecting the operator's hands during machine performance which are often subject to the risk of dispersed radiation from the head.

Features of the maniple are:

a) Prevents the operator from ultrasound exposure and energy

b) It is light ergonomic and easy to use

c) Power output is the maximum allowed by the standard norms- 1 and 3MHz.

d) Water-resistant to permit use in the air and under water

e) When making contact with the part of the body for treatment, the sensor gives off energy according to the specific requirements of that part and adverts the operator of energy output by means of a light indicator.

f) The maniple automatically gauges itself during function thus guaranteeing the best possible performance and saving precious time.

Technical specifications:

• Power supply - 230 Vca, 50-60 Hz ± 10%

• Maximum mains power absorption - 40 VA

• Fuses - 2 x 630 mA-T

• Backlit LCD display to view and

check the operating parameters Screen - Colored Graphic320x240 DPI Touch screen

• Programmable treatment time 1-30 minutes

• Function frequency - 1-2-3 MHz

• Isolation classification - I BF type

• Risk classification (93/42/CEE) - IIB

• Degree of protection from liquids - IPXO

• Probe - IPX4

• Output channels - 2 independent outputs

• Continuous peak power - 2 W / cm² ± 20%

• Continuous peak power - 3 W / cm² ± 20%

• Duty cycle - 10% - 100%

• Stored protocols - 200

• Storable protocols in the internal

memory - 200

• Storable protocols in Smart Card -200

• Probe with automatic contact sensor Yes Automatic probe recognition - Yes

• Low BNR self-calibrating probes - Yes

• Water resistant probes - Yes

• Possibility to updates Software - Yes

• Electrotherapy Connection - Yes

• External connection of Voice Unit - Yes

• Weight - 3.5 Kg.

Accessories supplied:

 

• Power cable: 1

• User's manual: 1

• Fuses: 2 x 630 mA-T

• Pennino: 2

• Probe 1-3 Mhz 5 cm² : 1

• Stylus Pen for Display : 1

• SmartCard: 1

Range of equipment for ultrasound therapy 1/3 MHz.The Fysio-Sonic represents a step ahead in the field of ultrasound therapy.

The application of advanced technology makes it possible to use machines which can be constantly updated and integrate functions which will be available in the years to come.

The probe has been designed and engineered to obtain the best possible results as well as protecting the operator's hands during machine performance which are often subject to the risk of dispersed radiation from the head.

Features of the maniple are:

a) Prevents the operator from ultrasound exposure and energy

b) It is light, ergonomic and easy to use

c) Power output is the maximum allowed by the standard norms- 1 and 3 MHz.

d) Water-resistant to permit use in the air and under water

e) When making contact with the part of the body for treatment, the sensor gives off energy according to the specific requirements of that part and adverts the operator of energy output by means of a light indicator.

f) The maniple automatically gauges itself during function thus guaranteeing the best possible performance and saving precious time.

An LCD graphic display visualises all the necessary information and a convenient encoder allows for quick selection of the protocol, accesses a library of 100 programmes, as well as enabling the operator to create and memorise up to 400 different working protocols.

Technical specifications:

• Power supply - 230 Vca, 50-60 Hz ± 10%

• Maximum mains power absorption - 40 VA

• Fuses - 2 x 630 mA-T

• Backlit LCD display to view and

check the operating parameters - Graphic bw 320 x 240 DPI

• Programmable treatment time - 1-30 minutes

• Function frequency - 1/3 MHz

• Isolation classification - I BF type

• Risk classification (93/42/CEE) - IIB

• Degree of protection from liquids - IPXO

• Probe - IPX4

• Output channels - 1

• Pulsed peak power - 2 W / cm² ± 20%

• Continuous peak power - 3 W / cm² ± 20%

• Duty cycle - 10% - 100%

• Stored protocols - 1 0 0

• Storable protocols in the internal

memory - 200

• Storable protocols in Smart Card - 200

   

   

Portable equipment, battery supported with rechargeable battery (up to 4 hours) 2 channel Electrotherapy, Magnetic therapy, Laser therapy and 1 Mhz Ultrasound therapy unit pulsed and continuous mode, portable with internal battery.

Electrotherapy:

• 2 Channel Electrotherapy
• 14 wave forms - Monophase, Diphase, Sinc Monophase, Sinc Diaphase, Short Period, Lond Period, Rectangular, Triangular, Rectangular Fredic, Triangular Fradic, Tens, Galvanic, Interputed Intophoresis, Kotz.

Ultrasound Therapy:

• 1 Output.
• Frequency 1 MHz.
• Adjustable Frequency from 0 to 2W Pulsed
• Automatic Contact Sensor

Magnetic Therapy

• 1 Output for magneto therapy.
• Maximum Power 100 Gauss
• Frequency 10 - 25 - 50 Hz

• PowerSupply:230Vca50-60Hz,±10%Maximum 
• Mains Power Absorption: 650 W
• Double delay mains fuse : 315 mA-T
• Backlit LCD Display to view and check theoperating parameters : Graphics 320 x 240 DPI
• Programmable Treatment Time : 1 - 99 Minutes
•  Length of the Diode Laser emission wave : 905nm

Technical features:

• Adjustable Pulse Frequency : 200 - 10,000 Hz
• Pulse Duration : 100 nsec
• Pulsed Mode : 10 - 100%
• Output Channels : 1
• Isolation Classification : I type BF

• Power Supply : 230 Vca 50-60 Hz, ±10%

• Maximum Mains Power Absorption : 650 W

• Double delay mains fuse : 315 mA-T

• Backlit LCD Display to view and check theoperating parameters : Graphics 320 x 240 DPI

•  2 kit points for lower limbs with 6 sector each + 1 inguinal sector + 1 stomach kit with 2 sectors
•  Internal polyuretan air chambers.
•  Fastening Velcro Closure.

• Power supply : 230 Vca 50-60 Hz ± 10%
• Maximum mains power absorption : 220 VA
• Double delay mains fuse : 1.6A-T Backlit LCD display to view and check the operating parameters GraphicS 320x240 DPI
• Programmable treatment time : 1-99 minutes
• Number of pneumatic sectors (output) : 9
• Maximum pressure : 150 mm Hg
• Isolation classification : I tipo BF
• Risk classification (93/42/CEE) : IIB
• Alarm if kit point is damaged : Yes
• Kit point control test : Yes
• Automatic kit point deflation at the end of treatment : Yes
• Independent pressure control for each sector : Yes
• Stored protocols : 100
• Storable protocols in Smart Card : 200
• Storable protocols in the internal memory : 200
• Weight : 30 Kg
• Size : 39 x 89 x 30 cml

• Power cable : 1
• User's manual : 1
• Fuses : 2 x 1.6A-T
• 9 section " Kit Point " for the treatment of inferior limbs : 1

Equipment for IR laser therapy at 905 nm, 1 output. Our Fisio-Lazer Basic equipment have a graphic display, which clearly shows the most important information. The device has 20 sthoursd protocols, and internal memory that can sthours up to 10 new work protocols. The unit is supplied with operating software in five languages: Italian, English, French, German and Spanish.